DarkCloud23 Posted May 13, 2019 Share Posted May 13, 2019 (edited) I want something for the cream-colored cloth seats in my Legacy, but I'm not sure if I want to pay a ton of money for something that won't work well or will just look tacky...worse, something that will stain the cloth seats when i take them off some time in the future! I hear you and I understand. These were made by Mastercraft. I got these used but they were pretty much in good working condition with no tears or spots. I got them for $30 and he paida little over $250. Mastercraft does make good seat covers. These are my first-ever that I have owned that are not from Walmart or Target or some auto parts store. I looked into wet okole. But Mastercraft uses a strap and buckle system where it goes under the seat in behind it to snap it and tighten. It's pretty good. it doesn't match my color scheme but for $30 I could not pass it up. I have the black interior but the seat covers are black and tan. I'll send pics as soon as I can Sent from my LM-V405 using Tapatalk Edited May 14, 2019 by DarkCloud23 Correction BC Racing. Blox Racing. Whiteline. AVO Turbo. RalliTek. Gramlights Michelin. Optima. HKC-Speed. Nameless. AFE. K&N. WeatherTech. Morimoto. Solar Gard. PPF. 9H. Link to comment Share on other sites More sharing options...
roughriduz Posted May 14, 2019 Share Posted May 14, 2019 Finished the plasti dipping of my rims and trim. Did my best to get a nice two tone. Just missing the tinted windows but my state is horrible with that. I've got the emblem overlays coming in for black with gray stars too. Link to comment Share on other sites More sharing options...
benja455 Posted May 14, 2019 Share Posted May 14, 2019 Finished the plasti dipping of my rims and trim. Did my best to get a nice two tone. Just missing the tinted windows but my state is horrible with that. I've got the emblem overlays coming in for black with gray stars too. Where did you get the overlays and how hard were they to install? Link to comment Share on other sites More sharing options...
2015 Tungsten Posted May 14, 2019 Share Posted May 14, 2019 Where did you get the overlays and how hard were they to install? I'm guessing this site. This is where I got mine and they are easy peasy to install. Just stick over the existing ones; front, rear, and steering wheel. https://www.emblemoverlays.com/category-s/143.htm Link to comment Share on other sites More sharing options...
2015 Tungsten Posted May 14, 2019 Share Posted May 14, 2019 Here's mine, carbon fiber with gold stars.. http://prntscr.com/no97wo Link to comment Share on other sites More sharing options...
SubieN8 Posted May 14, 2019 Share Posted May 14, 2019 Finished the plasti dipping of my rims and trim. Did my best to get a nice two tone. Just missing the tinted windows but my state is horrible with that. I've got the emblem overlays coming in for black with gray stars too. Looks friggin' slick! Link to comment Share on other sites More sharing options...
roughriduz Posted May 14, 2019 Share Posted May 14, 2019 Where did you get the overlays and how hard were they to install? I did indeed get them from the below link. They were $24 with shipping and came with front, back, and steering wheel. Super easy to install. I'll link the installation guide below too. https://www.emblemoverlays.com/product-p/p000005.htm https://www.emblemoverlays.com/Emblem-Overlays-Installation-Instructions-s/156.htm Link to comment Share on other sites More sharing options...
gathermewool Posted May 14, 2019 Share Posted May 14, 2019 Here's mine, carbon fiber with gold stars.. http://prntscr.com/no97wo Subtle - I like it I tried posting the pic for you, but the site wouldn't let me me If you go Advanced and scroll down, you'll see "Additional Options". Click on "Manage Attachments" '15 FB25 Magnatec 0W-20 + FU filter (70,517 miles) RSB, Fr. Strut Bar, Tint, STI BBS, LED er'where Link to comment Share on other sites More sharing options...
gathermewool Posted May 14, 2019 Share Posted May 14, 2019 I hear you and I understand. These were made by Mastercraft. I got these used but they were pretty much in good working condition with no tears or spots. I got them for $30 and he paida little over $250. Mastercraft does make good seat covers. These are my first-ever that I have owned that are not from Walmart or Target or some auto parts store. I looked into wet okole. But Mastercraft uses a strap and buckle system where it goes under the seat in behind it to snap it and tighten. It's pretty good. it doesn't match my color scheme but for $30 I could not pass it up. I have the black interior but the seat covers are black and tan. I'll send pics as soon as I can Sent from my LM-V405 using Tapatalk I'd still like to see some pictures, if you can support. I don't care too much about the interior of my car, so long as it's clean, but I do care enough to pay $30! It sounds like you made an excellent find! '15 FB25 Magnatec 0W-20 + FU filter (70,517 miles) RSB, Fr. Strut Bar, Tint, STI BBS, LED er'where Link to comment Share on other sites More sharing options...
Brisvegas Posted May 18, 2019 Share Posted May 18, 2019 Took home Judges Choice Award today at Import Face Off Fontana California.. Show Season never stops.. Just finished 2018 and already back at for 2019. Lantern, you car is too nice to do this .... but you might find it fun https://www.youtube.com/watch?v=fS6AXjNcTPU Link to comment Share on other sites More sharing options...
Grnlantern1 Posted May 18, 2019 Share Posted May 18, 2019 Lantern, you car is too nice to do this .... but you might find it fun [emoji38] https://www.youtube.com/watch?v=fS6AXjNcTPURoadkill is awesome.. I saw this when it first came out.. Thats why I plan to drive to Washington this July to attend Dirtfish Summer Fest.. Show them the other side of the Legacy.. Much love for rally..[emoji469][emoji469][emoji469] Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
Grnlantern1 Posted May 20, 2019 Share Posted May 20, 2019 Weathered the Storm today in Bakersfield Ca and was able to bring home 2 more awards for 2019. Best Interior and Best VIP.. Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
gathermewool Posted May 20, 2019 Share Posted May 20, 2019 Nicely done! '15 FB25 Magnatec 0W-20 + FU filter (70,517 miles) RSB, Fr. Strut Bar, Tint, STI BBS, LED er'where Link to comment Share on other sites More sharing options...
Ctrain7093 Posted May 21, 2019 Share Posted May 21, 2019 Good Job man, I have been following your build and hope to have mine looking that good in the Future! Link to comment Share on other sites More sharing options...
PATS4LIFE Posted May 23, 2019 Share Posted May 23, 2019 I added Autolink device with my Fortin Evo-one remote start.. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
tmoney468 Posted May 23, 2019 Share Posted May 23, 2019 Finally got around to installing my Polk component speakers in the front, and my Alpine amp under the passenger seat. It’s laughable how light the stock speakers are, makes you wonder why they even bother sometimes. Only think I didn’t realize was that Velcro doesn’t hook onto our carpet anymore. My 2012 Impreza was able to use Velcro to attach the amp and crossovers to the carpet under the passenger seat. Anyone have other options? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Grnlantern1 Posted May 24, 2019 Share Posted May 24, 2019 Good Job man, I have been following your build and hope to have mine looking that good in the Future!Stay tune I have a couple new things getting added in June.. I also plan to road trip to Dirtfish Summer Fest so anyone in Washington Area stop by and say Hi.. [emoji112][emoji112] Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
Fiatz79 Posted May 24, 2019 Share Posted May 24, 2019 New battery today. Old one went completely dead after 3 years. Lighting Mods Low Beams: D4S - OSRAM XENARC 66440 CBI HID BULBS Highbeam/DRL: 9005 - OSRAM NIGHT BREAKER UNLIMITED 9005NBUHCB BULBS Fog: H11 - OSRAM NIGHT BREAKER UNLIMITED 64211NBU-01B BULBS Subaru 20mm RSB Link to comment Share on other sites More sharing options...
2016Boxer4 Posted May 24, 2019 Share Posted May 24, 2019 These are the stock 225/50/18. I plan on changing to something like 245/40 once these are worn... Late response, but... Why not go with the 245/45R18? The 225/50R18 will decrease the tire OD, and cause the spedo error to increase if you are going from the 225/55R17. Link to comment Share on other sites More sharing options...
Da Roo Posted May 24, 2019 Share Posted May 24, 2019 Late response, but... Why not go with the 245/45R18? The 225/50R18 will decrease the tire OD, and cause the spedo error to increase if you are going from the 225/55R17. Not sure if I follow you. This is a limited model with the stock goodyears; 225/50/18. Never had anything smaller than 18s on here. The tire I plan on changing to, 245/40, if I am thinking correctly, is what most people run on 18x8.5’s Link to comment Share on other sites More sharing options...
Imprzme Posted May 25, 2019 Share Posted May 25, 2019 Not sure if I follow you. This is a limited model with the stock goodyears; 225/50/18. Never had anything smaller than 18s on here. The tire I plan on changing to, 245/40, if I am thinking correctly, is what most people run on 18x8.5’s 245 45's will keep your speedo accurate. 40's will give you a smaller diameter than stock - your speedo will read artificially high. Link to comment Share on other sites More sharing options...
Da Roo Posted May 25, 2019 Share Posted May 25, 2019 245 45's will keep your speedo accurate. 40's will give you a smaller diameter than stock - your speedo will read artificially high. Yeah, about 4.5% off, I get that. I just had no idea where the 225/55/17 talk came into play Link to comment Share on other sites More sharing options...
Kurtisl8 Posted May 26, 2019 Share Posted May 26, 2019 I’m in the process of getting the splash guards. Only question I have is there are two available for the 3.6r that I have- a sport and a non-sport, but both say they fit. Any ideas? The SKU are J101SAL340 and J101SAL330 Link to comment Share on other sites More sharing options...
chowser51 Posted May 27, 2019 Share Posted May 27, 2019 Car body should be the same for the splash guard locations Link to comment Share on other sites More sharing options...
Grnlantern1 Posted June 1, 2019 Share Posted June 1, 2019 Just a Teaser for now.. Going to have Slip-Lo installed tomorrow and Clear Bra Tuesday before Final Install next weekend.. It's the Gloss Black Sti Version Lip.. Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now