Bootyologist Posted June 14, 2018 Share Posted June 14, 2018 wouldn't getting the gialla painted cost about the same as the $400 lips/skirts??? the gialla is way too sexy to be neglecting...Here you go. https://www.ebay.com/itm/391724637965 Sent from my Nexus 5X using Tapatalk Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 14, 2018 Author Share Posted June 14, 2018 It will, but I haven't found a good paint shop near me yet and the lip will require some minor modification to fit due to the rear reflectors (which I still haven't figured out exactly what I want to do with). 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Chillwill007 Posted June 14, 2018 Share Posted June 14, 2018 wouldn't getting the gialla painted cost about the same as the $400 lips/skirts??? the gialla is way too sexy to be neglecting... Sent from my Nexus 5X using Tapatalk Ok what am I missing what is the gialla???? Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 14, 2018 Author Share Posted June 14, 2018 Ok what am I missing what is the gialla???? The Gialla Sportivo Rear Half Lip that I've had sitting unpainted in my back room for a while, searching for a good paint guy. Will look like the second picture once mounted up. And before you ask, it is not available domestically and can only be sourced from Japan, and be prepared to plunk down about $1000 just to get one here, unpainted. I scored a heck of a deal on the part but still ate it on freight. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Chillwill007 Posted June 14, 2018 Share Posted June 14, 2018 Ooooooo pewrty Link to comment Share on other sites More sharing options...
Chillwill007 Posted June 14, 2018 Share Posted June 14, 2018 Yeah why waste time and money on the other one Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 14, 2018 Author Share Posted June 14, 2018 (edited) Because I'm combing them. I'm using the side skirts and rear corner pieces from the DAMD set. My plan is to mount the rear corners of the DAMD kit underneath the Gialla lip, but I figure I might as well run them as is until I get the lip painted. My plan is to run both of them, set up just like carpenterltd has done his, with the difference that mine will be body colored instead of black. Edited June 14, 2018 by Humble Rumble 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Chillwill007 Posted June 14, 2018 Share Posted June 14, 2018 O wow even nicer super jealous now Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 25, 2018 Author Share Posted June 25, 2018 Rear bumper extensions installed. Really happy with how they look. Also changed the trans fluid, lubricated the brake hardware and add CRC Disc Brake Quiet to the pads, and repaired my left rest sway bar bushing mount over the weekend. Ran out of time to do the side skirts, will do them soon. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 10, 2018 Author Share Posted July 10, 2018 Got the side skirt extensions installed. Very happy with how they look, install was pretty easy and the color match looks great. These actually were easier to install than the rear corners believe it or not. Just about finished with the body/cosmetic mods now, or at least satisfied for a while. The Gialla lip and the Blitzen spoiler still need paint, and I might want to figure out something different with the front end at some point. Either way, car is looking pretty proper. Also got the diff cross member inserts finished, but and failed on the rear diff inserts and the 5EAT trans insert. The cross member inserts were easy, but we'll need different wrenches than what we had on hand, and we couldn't do the trans bushing because my dumbass forgot the most important tool: a 2x4 to support the trans. Also a nice shot of my nasty exhaust that I'm gonna get fully replaced whenever I get around to Raptors lmao. <3 rust belt. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 10, 2018 Author Share Posted July 10, 2018 (edited) Had my very first autocross event this past Sunday at SubieFest Midwest. I had an absolute *blast* doing it, most fun I've had in years. The car performed spectacularly, felt well in control of it at all times, never felt like I was over-driving the car or my limits. On my best run, I had the front Konis at 1/2 turn from full hard, and the rears 1/4 turn from full hard. I took 1st place in the NA Class, for which I got this sweet welded trophy made by GrimmSpeed, as well as a $100 GrimmSpeed gift card, pretty nice. I won the class by nearly 6 seconds over 2nd place (a Crosstrek lol), and when I compared my best time against the Turbo Stock class, I would've landed pretty much right dead in the middle at 10th of 18 drivers, which means I beat a good handful of WRXs and STIs. Not bad for an NA! Though I think in fairness sake, I'll enter Turbo Stock class next year to challenge myself, doubly so if I have Raptors and full exhaust sorted by then (I hope I do!). I got a full in-car and spectator video of my fastest run as well. I like this video setup, had my GoPro on a dash mount and my buddy trackside filming on his phone. I'm going to try and do this setup for all my future track/autocross events. [ame=http://www.youtube.com/watch?v=uEdYClXKogU]SubieFest Midwest 2018 - NA Class 1st Place [Autocross] - YouTube[/ame] Edited July 10, 2018 by Humble Rumble 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 25, 2018 Author Share Posted July 25, 2018 Couple new updates to make. Both my low beam halogens burnt out within two days of each other, so I finally sprung for the VLEDs Micro in 6k for my low beams, and MAN am I glad I did. Installation was a cinch, fully drop-in, fits easily with the dust cap, only needed to adjust the H7 collar one click to the side to align it perfectly in the projector, and MAN the throw and brightness on these are incredibly impressive. Color is also a perfect match with my city lights (which are also VLEDs 6k). I still need to get some proper night time comparison shots and throw measurements (the sunset shots don't really show it all too well), but the throw is seriously impressive on these, far exceeded my expectations and needs. I can finally actually SEE at night time and tell when my headlights are on lmfao. I'm not saying they are better or worse than HIDs, but for the ease of installation and performance they offer, I'm fully sold on them. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 25, 2018 Author Share Posted July 25, 2018 Also, participated in a local dyno day at this past weekend. Very happy with how my car did! It's a shame they couldn't hook up the stuff needed to get torque parameters (it would've made the process much longer for each car to go, and there were a lot of people there), but I came out with 228.49 whp, which is right around where Ed from XRT said I was at (he had said 230). This works out to roughly 285-290ish crank horsepower! Very, very happy with the result, especially for only having the Nameless 5" Axleback, AEM DryFlow Filter, and HKS Intake Funnel, and the XRT tune itself. XRT can really squeeze so much out of your car, if there's anyone that has doubts about it at all, let this put your doubts to rest. This is a great baseline to have for when I finally go raptors and full exhaust over the next year. [ame=http://www.youtube.com/watch?v=sAGQ5G-cYNk]2012 Legacy 3.6R Dyno Run (XRT Tune) - YouTube[/ame] 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Chillwill007 Posted July 26, 2018 Share Posted July 26, 2018 Nice where did you get the bulbs from? And awesome # for pretty much stock with a tune Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 26, 2018 Author Share Posted July 26, 2018 They from vleds.com. The bulb we need for low beam is H7. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Golferdude1087 Posted July 26, 2018 Share Posted July 26, 2018 You didn't show how they basically lit up the night when you installed them dude. Also this is what happens when I don't post for a year. you have 2300+ posts, and you joined AFTER me..lol Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 26, 2018 Author Share Posted July 26, 2018 (edited) You didn't show how they basically lit up the night when you installed them dude. Also this is what happens when I don't post for a year. you have 2300+ posts, and you joined AFTER me..lol Because that was in a facebook direct video to only you lol. I didn't save that video. Edit: actually wait! I forgot I took a quick video in the same spot last night. I'll post that in the next post. Here: [ame=http://www.youtube.com/watch?v=Zb9E72u3TZ4]VLEDs Micro H7 bulb 6k throw test - YouTube[/ame] Edited July 26, 2018 by Humble Rumble 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Golferdude1087 Posted July 26, 2018 Share Posted July 26, 2018 Because that was in a facebook direct video to only you lol. I didn't save that video. Edit: actually wait! I forgot I took a quick video in the same spot last night. I'll post that in the next post. Here: Like turning night into day Sent from my VS996 using Tapatalk Link to comment Share on other sites More sharing options...
Syndicate Posted July 28, 2018 Share Posted July 28, 2018 ...so I finally sprung for the VLEDs Micro in 6k for my low beams, and MAN am I glad I did. Installation was a cinch, fully drop-in, fits easily with the dust cap, only needed to adjust the H7 collar one click to the side to align it perfectly in the projector, and MAN the throw and brightness on these are incredibly impressive. Color is also a perfect match with my city lights (which are also VLEDs 6k). I still need to get some proper night time comparison shots and throw measurements (the sunset shots don't really show it all too well), but the throw is seriously impressive on these, far exceeded my expectations and needs. ...sounds good, especially that they fit under the stock dust covers. Thanks for the heads up, I'll have to grab a pair of these. Also, what are you running in the foglight position? Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 28, 2018 Author Share Posted July 28, 2018 ...sounds good, especially that they fit under the stock dust covers. Thanks for the heads up, I'll have to grab a pair of these. Also, what are you running in the foglight position? I've got everything listed out in the first post lol. Foglights are 2015-17 Ford Mustang Sealed LED fogs with two different yellow overlays to get the color i want. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Syndicate Posted July 28, 2018 Share Posted July 28, 2018 (edited) I've got everything listed out in the first post lol. Foglights are 2015-17 Ford Mustang Sealed LED fogs with two different yellow overlays to get the color i want. ...ah, reading is fundamental Did the two overlays really affect your light output? Edited November 14, 2019 by Syndicate Link to comment Share on other sites More sharing options...
Humble Rumble Posted July 29, 2018 Author Share Posted July 29, 2018 Nope, still very very bright. If anything, maybe a <5% output detriment, not anything I could personally tell with my own eyes that couldn't be attributed to the color change. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
stewdogg Posted August 1, 2018 Share Posted August 1, 2018 You gonna make it up for the Fl4tfest this weekend? Link to comment Share on other sites More sharing options...
Humble Rumble Posted August 1, 2018 Author Share Posted August 1, 2018 Really tight on funds at the moment, going to see what I can swing. Depends on my on-call check that will hit tomorrow night at midnight. I'd definitely like to go. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
stewdogg Posted August 2, 2018 Share Posted August 2, 2018 I hear that, it's easy to be broke. I will keep an eye out for the Humble Rumble 3.6R+! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now