valleylegacy Posted August 15, 2017 Author Share Posted August 15, 2017 Finally got my JDM Legacy S402 Wagon Struts! BNIB Part Numbers: Front - 2031021070SP, 2031021060SP Rear - 2036521040SP X2 IMG_9617 by Arnold Chun, on Flickr"][/url] Link to comment Share on other sites More sharing options...
SAABaruu Posted August 18, 2017 Share Posted August 18, 2017 Wow... Should I dare ask how much for the struts? Any updates as far as tuning goes? Link to comment Share on other sites More sharing options...
valleylegacy Posted August 19, 2017 Author Share Posted August 19, 2017 Wow... Should I dare ask how much for the struts? Any updates as far as tuning goes? The struts were $1875 shipped from Subaru of Japan. I got a pretty nice discount from the factory due to my relationship. The issue I have been having is the A/F Ratio sensor not sending a signal even after replacing it with a new one. So we went through the ECU and found a issue with it so ordered another one to replace it. Then the EGR valve was also troublesome so I had to replace it. I've also wanted to get a better turbo and something oem so I just ordered up a IHI VF53 ball bearing turbo from a JDM GRB STI SPEC C. Part Number - 14411AA820 Link to comment Share on other sites More sharing options...
valleylegacy Posted August 19, 2017 Author Share Posted August 19, 2017 Finally found a MT version 05 JDM Legacy Tuned By STI Gauge cluster! It is from the pre-facelift version so I just need to get it programmed and adjusted for KPH-MPH reading and I'm good to go. Sorry for the poor picture. Glare sucks. IMG_9641 by Arnold Chun, on Flickr"][/url] Link to comment Share on other sites More sharing options...
valleylegacy Posted August 23, 2017 Author Share Posted August 23, 2017 Finally finally got the rear bumper installed and the exterior is now finished. Well except for a couple minor issues with the door moldings so I bought new ones. IMG_9715 by Arnold Chun, on Flickr"][/url] IMG_9716 by Arnold Chun, on Flickr"][/url] IMG_9717 by Arnold Chun, on Flickr"][/url] IMG_9718 by Arnold Chun, on Flickr"][/url] IMG_9719 by Arnold Chun, on Flickr"][/url] IMG_9720 by Arnold Chun, on Flickr"][/url] IMG_9721 by Arnold Chun, on Flickr"][/url] Link to comment Share on other sites More sharing options...
DecentDesigner Posted August 29, 2017 Share Posted August 29, 2017 The rear bumper looks awesome! Did you end up taking the bumper support off or trimming it back? If so, is that a pretty involved process? Link to comment Share on other sites More sharing options...
valleylegacy Posted August 29, 2017 Author Share Posted August 29, 2017 The rear bumper looks awesome! Did you end up taking the bumper support off or trimming it back? If so, is that a pretty involved process? The JDM Legacy Wagon rear bumper is the shortest of them all. It is shorter than the JDM OUTBACK bumper, EDM, and AUDM models. I had to buy a EDM rear crash beam from a legacy wagon from their market and trim it down to fit the JDM wagon rear bumper. This is because the JDM Legacy models do not use a crash beam due to lower crash standards. Link to comment Share on other sites More sharing options...
05MNLGT Posted September 6, 2017 Share Posted September 6, 2017 dam i'm feeling good. my whole strip down, body work, paint and assembly was $2000. that was for my friend who helped. we didn't talk for 6 months after. we just started talking again. lol. That's actually on the cheaper side of the going rate. I had a few quotes while in CA of 8-10k to respray my wagon OBP. Link to comment Share on other sites More sharing options...
famaya26 Posted September 6, 2017 Share Posted September 6, 2017 Sad that the owner of this thread can't update it. Link to comment Share on other sites More sharing options...
BP5TBSTI Posted September 18, 2017 Share Posted September 18, 2017 Awesome build my friend. Helping my buddy out to update the thread. Link to comment Share on other sites More sharing options...
BP5TBSTI Posted September 18, 2017 Share Posted September 18, 2017 Link to comment Share on other sites More sharing options...
BP5TBSTI Posted September 18, 2017 Share Posted September 18, 2017 Link to comment Share on other sites More sharing options...
BP5TBSTI Posted September 18, 2017 Share Posted September 18, 2017 Link to comment Share on other sites More sharing options...
BP5TBSTI Posted September 18, 2017 Share Posted September 18, 2017 The cars got rear seat recline! Awesome. The car has JDM S402 Wagon Struts and Springs! Impressive. Night Pics displaying the cars illumination inside and out. 05 Tuned By STI Gauge cluster. Very nice touch. Link to comment Share on other sites More sharing options...
bigBADbenny Posted September 18, 2017 Share Posted September 18, 2017 Arnie is awol? Link to comment Share on other sites More sharing options...
SAABaruu Posted September 18, 2017 Share Posted September 18, 2017 Any updates regarding the tuning? Interested how this engine performs on pump being a high compression motor Link to comment Share on other sites More sharing options...
derp Posted September 19, 2017 Share Posted September 19, 2017 Ok now do me a huge favor and trade me straight up for my Civic SI? I could suck start a snow blower. Link to comment Share on other sites More sharing options...
98legwag Posted September 19, 2017 Share Posted September 19, 2017 Car looks absolutely amazing. Great work. Link to comment Share on other sites More sharing options...
ilikefunkymusic Posted September 20, 2017 Share Posted September 20, 2017 Outrageous build! Curious as to why you've gone through all this trouble, but you didn't get the Liberty tuned by sti wheels? Link to comment Share on other sites More sharing options...
BP5TBSTI Posted September 25, 2017 Share Posted September 25, 2017 The McIntosh speakers are going to be nice. But first he has to swap the RHD window controls out for the LHD ones. Link to comment Share on other sites More sharing options...
BP5TBSTI Posted October 5, 2017 Share Posted October 5, 2017 (edited) This car has some awesome JDM features on it. The rear JDM/EDM fog light https://vimeo.com/234265861 The JDM Legacy Wagon rear seat one touch fold down release. https://vimeo.com/234265848 Edited October 5, 2017 by BP5TBSTI Link to comment Share on other sites More sharing options...
Sboarderk03 Posted October 5, 2017 Share Posted October 5, 2017 Holy expletive, this things is ridiculous. I never knew there was any rear reclining option for the wagon anywhere, sooo much goodness. My dream wagon in every way. Link to comment Share on other sites More sharing options...
BP5TBSTI Posted October 20, 2017 Share Posted October 20, 2017 (edited) My buddy is putting in the JDM Mcintosh system. Well at least attempting to. Got the door speakers installed. Just needs to get the door panels modified and install an amp + new HU. These yellow grommets were needed to install the middle speaker. Middle speakers installed but need to be wired up. Lower front door speaker installed All front front speakers installed Edited November 16, 2017 by BP5TBSTI Link to comment Share on other sites More sharing options...
4S-TURBO Posted October 20, 2017 Share Posted October 20, 2017 Just a heads up, in my experience McIntosh speaker surrounds disappear around the 10 year mark. If these speakers haven't already been done and are approaching that age or are older, I'd consider getting new surrounds (even if not cracking) before having to do another pull and install. Link to comment Share on other sites More sharing options...
BP5TBSTI Posted October 23, 2017 Share Posted October 23, 2017 (edited) JDM Recaro Seat Rail covers that work with the BP5/BL5 chassis. Small details really pay off. Love this cars progress and the attention given to the specifics. Edited October 23, 2017 by BP5TBSTI Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now