Golferdude1087 Posted June 18, 2015 Share Posted June 18, 2015 Well it's done now, I'll get it done right at AMR next month. BTW The 26mm 2013+ 3.6R FSB and 20 mm 2015+ WRX RSB make a night and day difference verse stock. I actually feel confident going into turns now. Sent from my VS980 4G using Tapatalk Link to comment Share on other sites More sharing options...
fredrik94087 Posted June 18, 2015 Author Share Posted June 18, 2015 (edited) ^^^ Great, but the 22mm would have been better. Doesn't matter that much for DD, though. On a side note, in about a week, I should have the following for sale: 1. Custom single out exhaust. 2. DAMD steering wheel 3. AFE intake and custom parts for it. 4. Halfway done tarmac zero coilovers. 5. two sets of enkei rpf1 17x9 +45 in Special Brilliant Coating wrapped with 275/40/17 falken 615k. Maybe more stuff.... Edited June 18, 2015 by fredrik94087 "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
DJMajickMan Posted June 19, 2015 Share Posted June 19, 2015 ^^^ Great, but the 22mm would have been better. Doesn't matter that much for DD, though. On a side note, in about a week, I should have the following for sale: 1. Custom single out exhaust. 2. DAMD steering wheel 3. AFE intake and custom parts for it. 4. Halfway done tarmac zero coilovers. 5. two sets of enkei rpf1 17x9 +45 in Special Brilliant Coating wrapped with 275/40/17 falken 615k. Maybe more stuff.... checkbook waiting Link to comment Share on other sites More sharing options...
GTEASER Posted June 19, 2015 Share Posted June 19, 2015 ^^^ Great, but the 22mm would have been better. Doesn't matter that much for DD, though. On a side note, in about a week, I should have the following for sale: 1. Custom single out exhaust. 2. DAMD steering wheel 3. AFE intake and custom parts for it. 4. Halfway done tarmac zero coilovers. 5. two sets of enkei rpf1 17x9 +45 in Special Brilliant Coating wrapped with 275/40/17 falken 615k. Maybe more stuff.... Can I get those Whiteline FSB bushings and brackets? If you still have your stockers. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Golferdude1087 Posted June 19, 2015 Share Posted June 19, 2015 ^^^ Great, but the 22mm would have been better. Doesn't matter that much for DD, though. On a side note, in about a week, I should have the following for sale: 1. Custom single out exhaust. 2. DAMD steering wheel 3. AFE intake and custom parts for it. 4. Halfway done tarmac zero coilovers. 5. two sets of enkei rpf1 17x9 +45 in Special Brilliant Coating wrapped with 275/40/17 falken 615k. Maybe more stuff.... Agreed it would have been but she is a DD and the wrx bar was far under the cost of the whiteline bar. With all those parts, what do you have c planned.... Sent from my VS980 4G using Tapatalk Link to comment Share on other sites More sharing options...
cannondalemtb Posted June 19, 2015 Share Posted June 19, 2015 ^^^ Great, but the 22mm would have been better. Doesn't matter that much for DD, though. On a side note, in about a week, I should have the following for sale: 1. Custom single out exhaust. 2. DAMD steering wheel 3. AFE intake and custom parts for it. 4. Halfway done tarmac zero coilovers. 5. two sets of enkei rpf1 17x9 +45 in Special Brilliant Coating wrapped with 275/40/17 falken 615k. Maybe more stuff.... Keep me in mind for the DAMD and AFE. Why the garage sale!? Link to comment Share on other sites More sharing options...
fredrik94087 Posted June 19, 2015 Author Share Posted June 19, 2015 I traded shrek for fiona...a white wrx 6mt. All bushings stay on the car. There will be a boomba TB to add to the sale list. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
KFCConspiracy Posted June 19, 2015 Share Posted June 19, 2015 Dibs on the boomba. Link to comment Share on other sites More sharing options...
fredrik94087 Posted June 19, 2015 Author Share Posted June 19, 2015 Dibs on the boomba. I think I am gonna get quite busy with responses next week. On a side note...I dont believe the 3.6r motor has inherent issues. I will say that oil starvation becomes an issue with high speed cornering and engine load for an extended period of time. This can happen with every production motor. I have heard it happen with a dry sump system. A baffled oil pan can help. There is a "sump" that can be added which increases the oil capacity by a few quarts. An oil cooler is not a bad idea either but it can not take care of starvation in any way. I traded shrek for fiona as it brought me back to my beloved evo 8. White turbo 2.0 no frills. I had test driven a 2015 wrx limited and a 2015 sti limited a few months back. Neither of them pulled the trigger. Maybe because they had "frills". To each his own, right? Boomba, Damd steering wheel, two sets of enkeis with tires, and a set of brand new in box fortune coilovers with 500# springs are ready to go. Other parts will have to wait. I will make a for sale thread in a few days. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
ItalianLegacy Posted June 20, 2015 Share Posted June 20, 2015 let me know if you sell then throttle body. would make a nice addition to my build. Sent from my SM-G925V using Tapatalk Link to comment Share on other sites More sharing options...
fredrik94087 Posted June 20, 2015 Author Share Posted June 20, 2015 let me know if you sell then throttle body. would make a nice addition to my build. Sent from my SM-G925V using Tapatalk I know...you had asked for it a week ago I think. You are first in line. Pm me and we can go from there. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Golferdude1087 Posted June 24, 2015 Share Posted June 24, 2015 Finally back from my mini honeymoon, on which I drove through West Virginia so I got to truly put the sway bars through its paces. :-) The swaybars truly make the car feel sporty and shes no longer just a fast boat. I got to take her on some back roads that I frequently drive where the car felt near her limit at 40 before but now feels pretty solid at 50-55. Best of all the bars actually make me feel more confident in emergency situations. She no longer feels loose like she did before. Up next is the transmission fluid will get drained/filled and she just got her last fill up of 87 octane before getting switched to 93 permanently. In under a month, its up to AMR on July 20th and the car goes in for the headers/y pipe/tune/high flow cats/ultra quiet resonator install. I will report back after all of that is installed and I get some time with the additional power Link to comment Share on other sites More sharing options...
Tradewind Posted June 25, 2015 Share Posted June 25, 2015 (edited) Notice The Raptor EZ series headers - the new ultra cool version 2 are NOW IN STOCK for immediate shipping. Most people who inquired will now have received an email. If you have no email, email me asap as the stock is limited as always. raptorsc@westnet.com.au This is all systems go. This covers the following Legacy sedan models 4GEN EZ30 5GEN EZ36 6GEN EZ36 Edited June 25, 2015 by Tradewind Link to comment Share on other sites More sharing options...
Golferdude1087 Posted June 25, 2015 Share Posted June 25, 2015 I traded shrek for fiona as it brought me back to my beloved evo 8. White turbo 2.0 no frills. I had test driven a 2015 wrx limited and a 2015 sti limited a few months back. Neither of them pulled the trigger. Maybe because they had "frills". To each his own, right? Nothing wrong with being a purist. You want the best connection to the road with the least distractions as possible right? I am sure most of us would give many of the frills that come with the 3.6R just to have the 6 speed manual and that connection with the car. Link to comment Share on other sites More sharing options...
ncfree Posted June 25, 2015 Share Posted June 25, 2015 Notice The Raptor EZ series headers - the new ultra cool version 2 are NOW IN STOCK for immediate shipping. Most people who inquired will now have received an email. If you have no email, email me asap as the stock is limited as always. raptorsc@westnet.com.au This is all systems go. This covers the following Legacy sedan models 4GEN EZ30 5GEN EZ36 6GEN EZ36 Damn I want these. But alas. Buying a house and can't afford anything right now haha. Gotta get off this enabling site. Link to comment Share on other sites More sharing options...
KFCConspiracy Posted June 26, 2015 Share Posted June 26, 2015 Got my car back today from getting my midpipe built and high flow cats welded in. The car runs just like it did after the header install and tune. It's a lot quieter too. You guys don't know how tired I am of driving a 4 cylinder accord. Link to comment Share on other sites More sharing options...
Golferdude1087 Posted June 26, 2015 Share Posted June 26, 2015 I'd rather have a 4 cylinder accord then the Versa or Rio I am getting as a rental for the 2 days at AMR. That said, there is nothing like being able to drive your own car again. Link to comment Share on other sites More sharing options...
KFCConspiracy Posted June 27, 2015 Share Posted June 27, 2015 The car is so different with the mid pipe and high flow cat.. the throttle feels less laggy, the sound is quieter than it has ever been, but still powerful sounding. I can't stop driving this car. Link to comment Share on other sites More sharing options...
Perscitus Posted June 27, 2015 Share Posted June 27, 2015 Yes yeeessssss Link to comment Share on other sites More sharing options...
Spidermanswrx Posted June 29, 2015 Share Posted June 29, 2015 So what the best mid pipe to run? I know you probably already talked about it 50 pages back. I don't care to be to quite and going to run cat less. I have nameless sti muffler deletes. Link to comment Share on other sites More sharing options...
Phillitupp Posted June 29, 2015 Share Posted June 29, 2015 So what the best mid pipe to run? I know you probably already talked about it 50 pages back. I don't care to be to quite and going to run cat less. I have nameless sti muffler deletes. I run catless as of right now, it gets extremely loud but I don't mind it to much. I had amr make me a custom y pipe, by far the best investment I made Sent from my SAMSUNG-SM-G900A using Tapatalk Link to comment Share on other sites More sharing options...
KFCConspiracy Posted June 29, 2015 Share Posted June 29, 2015 So what the best mid pipe to run? I know you probably already talked about it 50 pages back. I don't care to be to quite and going to run cat less. I have nameless sti muffler deletes. Midpipe doesn't really become a problem without headers. But the way to do the midpipe is custom. I had mine made by a local fabricator... They had my car for about a week for measurements and to do the work, which was a little unfortunate, but AMR's a real hike for me. My preference is with vibrant high flow cats. But do what you want... The car may smell a bit lawn-mower like and be loud without cats. Link to comment Share on other sites More sharing options...
Golferdude1087 Posted June 29, 2015 Share Posted June 29, 2015 (edited) Midpipe doesn't really become a problem without headers. But the way to do the midpipe is custom. I had mine made by a local fabricator... They had my car for about a week for measurements and to do the work, which was a little unfortunate, but AMR's a real hike for me. My preference is with vibrant high flow cats. But do what you want... The car may smell a bit lawn-mower like and be loud without cats. That custom midpipe is truly the X factor and headache of the exhaust build. Since there is no standard, the price and quality can vary from shop to shop as they will be building it from scratch. I go up to AMR in a few weeks and even though its a drive for me, I figure I will just get everything done at once. That and since they've already done it they know the dimensions required so time will be less. They told me only 2 days to get that done. As for the cats, aside from the points above, if you have a significant other who doesn't like the rumble or noise, the cats and resonator are a must. Mine got sick from the rumble/vibration from sitting in an STi too long so I'm making sure the car is as quiet as possible after the installation. Edited June 30, 2015 by Golferdude1087 Link to comment Share on other sites More sharing options...
Perscitus Posted June 29, 2015 Share Posted June 29, 2015 http://www.ebay.com.au/itm/HEADERS-to-fit-Subaru-Legacy-Liberty-Outback-MY04-MY09-EZ30-6cylinder-engine-/181787116249 Link to comment Share on other sites More sharing options...
Golferdude1087 Posted June 30, 2015 Share Posted June 30, 2015 I just got my Apexi dry flow filter and it's hilarious. It's mostly in Japanese lol Sent from my VS980 4G using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now