-
Posts
36 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by cannondalemtb
-
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Keep me in mind for the DAMD and AFE. Why the garage sale!? -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
You're welcome In other 3.6 news... Who needs new Raptor headers!? Turns out they won't work on the Outback because the front subframe is spaced downward and leaves no clearance for the headers. I am having the shop utilize the stock exhaust manifold collectors, delete the cats, and fabricate a y pipe. So headers will be up for sale tonight. -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
http://Www.subarupartsandaccessories.com I paid $65.93 and $3.98 for each bushing. 2015 wrx/sti 20mm rear away bar. 20451VA000 RSB 20464VA000 bushings That was March 9th. But even then everybody said you couldn't get them and there was no eta. I got it from them in a week. Just call first. -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I turned this into an Outback thread. Oops! Back on topic! -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I associate myself more with the lgt crowd than the outback crowd. Partially because they're boring and think it's a sin to remove useless roof racks. And partially because I've been around since I owned my unicorn, an 05 legacy gt limited wagon (manual, swp on black, hta68, fmic, etc). -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Of course it is! That's why I posted it in the 3.6R thread Better shot from today... http://images.tapatalk-cdn.com/15/05/21/95da3d57a660fe4ada04c71314c8070d.jpg http://images.tapatalk-cdn.com/15/05/21/77a54fc4a5baabe2506ad6209c2ca56c.jpg -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Roof rail deletes 90% done. Fenders rolled. Wheels mounted. Can't wait to get the exhaust on next week and finish this tune! http://images.tapatalk-cdn.com/15/05/19/c737ee1018d5158f732a9e30998c0b21.jpg -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Full set of 19" wheels and tires and a second set of 19" tires all fit into the back of a '14 Impreza hatch! -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
They're not on yet!! http://images.tapatalk-cdn.com/15/05/19/026e20975456647d7fc544a3277e5f55.jpg http://images.tapatalk-cdn.com/15/05/19/173435416ee7e155e1973478a56e1586.jpg Except with bigger tires -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I should have results for my raptor headers and borla catback on my Outback sometime next week. In the meantime, JDM roof rack deletes and 19x8.5's! http://images.tapatalk-cdn.com/15/05/19/661608bac03beeeb28848c034cbdfe1e.jpg http://images.tapatalk-cdn.com/15/05/19/8bd9113392f0bc6e427c35de74ae028c.jpg -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
http://images.tapatalk-cdn.com/15/05/06/77f2d82814590dadbce11b7a6a1da9e8.jpg This is it on '08 spec B wheels, but they just weren't wide enough and not the right offset. So the stocks are back on for now. Right now it has Legacy GT struts, Swift lowering springs, Legacy rear upper control arms, and a '15 wrx/Sti 20mm rear sway bar. -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Well except for the fact that I am on Legacy GT struts with Swift lowering springs Stock wheels and tires... but only for now. Just trying to find the right set. So it should be almost identical except for a slight weight difference. -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
If the y-pipe was made for the Legacy GT catback and raptor headers, then it would work with any of they aftermarket catbacks. I am having the y-pipe made for the Raptor headers and Borla Legacy GT catback on my Outback. Then I can swap to any other Legacy GT catback in the future. -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I wish someone produced a y-pipe for the 3.6R with Raptor headers rather than having to have a custom one made... -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
What size is the piping and flanges? -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Except for the double gasket thing pricey oem gaskets and more prone to leaks. -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Thanks! So I am guessing that I will not need them on my '11 Outback... -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
It comes with all the gaskets (not the best quality) and the two bolt flanges to build the y pipe. But what are the thin metal piece shaped like the gasket from the head to the header? http://tapatalk.imageshack.com/v2/15/03/18/2534ec22ef2f2b72f122ad4ab1960e19.jpghttp://tapatalk.imageshack.com/v2/15/03/18/ec54d22e0af9870e42aaee182ca0a9fe.jpg -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
They're not. Just a weird angle. -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Well that was quick! http://tapatalk.imageshack.com/v2/15/03/18/fc068e7096df6daaad912ab92111d8e5.jpg -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
http://www.raptorsc.com.au/contact.html -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I just sent it on a whim! I hadn't even looked at this thread in a couple days. "Yes I do have a set for you" -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Read the f'n manual?? -
Official 3.6R Mod List
cannondalemtb replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I contacted Raptor today in regards to purchasing a header and was told that they had one ready to ship! Invoice received and paid. What a deal! I couldn't believe how affordable it was! I was expecting $600-800 range. Total (shipped) was $504AUD. So $394USD. Shipping is estimated at 6 days. -
I was at uconn in my swp lgt wagon