Tradewind
Members-
Posts
155 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by Tradewind
-
No compromise Legacy 3.0R spec.B tune up
Tradewind replied to BojanR's topic in Fourth Generation Legacy (2005 - 2009)
For the cabin noise, focus more on that front muffler, go for a type with more muffling and then you will see a big reduction in noise right throughout the car -
No compromise Legacy 3.0R spec.B tune up
Tradewind replied to BojanR's topic in Fourth Generation Legacy (2005 - 2009)
Well that is just amazing. I have shared the link many times this morning amongst the AUS community and some in USA too. You have done an amazing job, fantastic detail about the work done (Tim) -
ItalianLegacy 3.6R Official Thread
Tradewind replied to ItalianLegacy's topic in Fifth Generation Legacy (2010 - 2014 )
Good to hear the tuning is fully sorted, joy in abundance will follow -
ItalianLegacy 3.6R Official Thread
Tradewind replied to ItalianLegacy's topic in Fifth Generation Legacy (2010 - 2014 )
Can assist with Tribeca, send pics and I will advise the things we need to consider. The tuning is easy how that Italian Legacy has XRT all experienced in this model now. -
ItalianLegacy 3.6R Official Thread
Tradewind replied to ItalianLegacy's topic in Fifth Generation Legacy (2010 - 2014 )
300 came and went a good while ago I think -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Good find, the person that mentioned tons of cash - can direct their cash right here, receptacle for it is waiting -
ItalianLegacy 3.6R Official Thread
Tradewind replied to ItalianLegacy's topic in Fifth Generation Legacy (2010 - 2014 )
Always looking perfect -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Announcing - the current stock of headers is now sold out. We will resupply in the new year -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
I have been in contact with Italian - going strong presently. Not sure what his next mods are Good to hear from both you you also -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
This thread gone quiet? Raptor will have the 3.6 headers in stock very shortly, ship docks this morning AU time -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Injectors are extremely easy to source for the 3.0/3.6 - only needed if you want to experience the joys of boost safely. As mentioned - STI injectors slip straight in. The OEM ignition coils punch out solid sparks, they ignite boosted engines very reliably, the Subaru coil is solid. The path to NA power is in the airfilter/intake system to the throttle body, its in the headers and correct exhaust system and finally its in the tuning of the ECU. You upgrade all those items and you will get the solid gains mentioned by others. Proven and safe path with solid satisfaction -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
No matter who does the job, an outcome of happiness is the best outcome of all -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Thankyou for following the advice and getting the desired outcome. It is no different even on my own car - the system must be fault free to be rattle free. Impressed! -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Check clearance around all point of exhaust from front to back and make sure there is no stress or excess pulling at any mount points. It is an installation issue and I experienced it myself several times when I first developed the product. It not the headers themselves, it's how the entire system is fitted. Inspection and small adjustments will eliminate the rattle permanently -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Ed, nothing for EJ, that market is saturated already -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Ed, all good, that is how we write the date in AU. 8th day, 10th month,2015 -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
The next Raptor header shipment is NOW UNDERWAY at the factory - will progress report here as normal. Should be on way here around the 8/10/15 -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Spidermanswrx I have 12mm spacers (near 1/2") in stock if you really want to drop the header down a bit further. I am using this on the Outback when there is a clearance issue. Works very well. Email me (raptorsc@westnet.com.au) and I will send you a set if you like. -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
All sorted. Anyone else keen for headers, deciding on when to process next order ...... -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
The information above is correct Also, a 3.6 mounted in a 4GEN does not need spacers at all, as discovered by spidermanswrx. No 4GEN H6 requires spacers -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
That's terrific feedback, the magic is still good! -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
AMR have had their stock for near on 2 weeks already ...... -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
You would be. All USA customers should be seeing the products arriving right now or in next few days -
Official 3.6R Mod List
Tradewind replied to fredrik94087's topic in Fifth Generation Legacy (2010 - 2014 )
Header stock all SOLD OUT There will be more, just let us know if you are interested and we will initiate another run of manufacturing. We have a 2 people so far for next order. Quite a few sets of headers went to the USA this time for 5GEN, a header set was also supplied for a 6GEN owner in USA