KJS2023

That looks so much better then stock I have tan interior too ended up with just a basic seat cover set for under $100 bit yours looks amazing. How much did it cost w install? ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

There is a black box on a piece of metal up and to the left of the brake that’s the remote start module I believe most likely it was installed in yours but they misplaced the paperwork and key so looks like you got the upgrade for free. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Pedal commander has worked great as long as I change it parked there’s never a cel issue. I put it in eco mode if I’m having the car worked on when I got my tire fixed. If you go to subi take it out. I drive in sport mode which is just so much fun. Sport plus is a lil scary I’m waiting for a nice day to try plus again. All in all it’s a fun time I have mine mounted to the side of the center console so it’s not the easiest to see so I use the cell phone app to change the setting on the fly which works great. Definitely give it a try if u get it from Amazon you would prob have a good return policy to work with if you hate it. I think where there’s snow on the ground eco mode will be key cuz sport I could see being an issue in slower driving conditions. As always bring your obdii scanner with you just in case you limp mode your car. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Do what I did and get the ram air intake if u want the noise with it. I kept the front damn in place to direct the airflow works great looks great. It uses a standard k&n cone filter. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Not sure how to explain it but.... https://pedalcommander.com/pages/pedal-commander-product-information. That should help a bit. I drove city to work it’s prob only a lil better then stock. Set for sport on the way home and noticed the diff w a lot more pep to the peddle. Did the change while parked and no cell or limp mode issues. I want to try it in manumatic mode on sport plus and see what this car can really do. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Even when you go hard on the stock accelerator there’s a little lag too it. With sport+ its a lot less with a lot of acceleration which surprises you but it sure does suck to drive sport+ anywhere but the highway. Big thing will be for me at least is knowing when to start the mode without going into Limp mode on the highway. I do have an extender I use a SyncUP drive which is in the fuse cubby so real easy to unplug from there. I’ll let you all know how it turns out for me especially after disconnecting the battery for a while. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Well Pats4Life u convinced me to get the pedal commander installed today. I find it easy to have my phone in the cup holder with screen on in app to make changes on the go. First reaction city and sport seem good to me. Sport+ is just a blast of fun bit sucks if you are trying to get to the highway in slow traffic it has the most touchy peddle ever this way it is actually tiring using it with the lightest touch. Now the issue..... I’m in the highway using sport get off the highway to another on ramp lay off the gas hit sport+ wait till phone says it’s good and take the on ramp like a bat outa hell so much pickup feels real nice. Get up to stop and go traffic lay off gas go to city mode boom cars in Limp mode can barely accelerate get to a lot take my scanner out clear code and I’m off again in city mode. Now even though I cleared this code my new scanner still shows it as a permanent code P2122. Car doesn’t show it and drives fine but the scanner shows it. I’ll test this thing out more tomorrow on the way to work but if anyone goes to use this thing you best have a scanner with you at all times in case Limp happens to you too. I’m not giving up on this thing yet sport+ was just too much fun to walk away now. I think you might have to go between modes slowly instead of city to sport+ which prob was to big of a change to trigger it. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Thanks for the info just found mine on Amazon $249.99 w/ free shipping. Their site had it for the same price but charged $9 to ship. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

I’ve wanted one as well read a review of a different car that accelerated on its own with it which made me nervous. Can you set it for normal if someone else drives my car? Do you notice In general quicker acceleration when doing high way on ramp accelerations? Is it any better then when we just ramp up the acceleration with our foot? Where did you mount the controller? Can you change the settings while driving? Like when u get to stop and go traffic on the highway I would assume the touchy peddle would be annoying. Last question got a link from where u purchased it from? ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

I got rid of my noise by adding a noise filter to the LOC with own ground. Then added a second one to the stock head unit and gave that another ground. Took out my ground loop isolators they were interfering with the overall gain of the system. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

No way my last car was a 02 maxima did a lot to that car too loved it and if I didn’t ruin a piston I’d still be driving it. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

I’m running a 4 channel amp for kappa components and an amp for a sub all ran through a line level converter to the stock head unit so yes this is possible. I have a 2016 so as far as differences in harness not sure. My trick was buying the stereo harness adapter as if I was replacing the head unit so I would know what wire is what and I cut and soldered in my lines. Our car has a tendency to give alternator noise. Especially if and when you decide to amp up some nice replacement speakers. It’s possible to get rid of that noise. There was a lot of back and forth with us on the forums to solve the problem and now it is very possible. The adapter you show I am not familiar with. As for the wire runs check out my post. Ken’s 2016 legacy I have pics of most of my install and questions about it that have been answered there. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

I’ve used toothpaste before which works great and I’ve also used the 3m kit which uses a power drill w multiple pads honestly both had great results ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

That really sucks but hey at least the spoiler came in finally. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

They wouldn’t dim led forwarding voltage is such a small range it’s really on or off. I tapped into the arm rest power for it but I believe the original kit instructions said to use power and ground from hazard wire. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Carriers will use 4g for a lot of connected extras while 5g will be used to high end like phones and tabs. Trackers and watches will most likely stay with 4g for many years. The carrier needs the extra lanes to handle traffic meaning both frequency’s will be needed to manage network congestion. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Final solution to my alternator wine added a noise filter to the loc with its own ground then another to the power of the oem headunit. Took my ground loop isolators off they were ruining my mids. Now no noticeable wine whatsoever instead now I just have a little white noise when no music plays. Another tune should fix that. I did break out my bd meter I can hit 116db with my current tune. This is the filter If anyone else had my issue Pipeman's Installation Solution... https://www.amazon.com/dp/B07NPF6KVL?ref=ppx_pop_mob_ap_share ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

I like the first one and last one..... the middle one with the notch looks a little odd. The last one will give you the best downforce might help keep the car a little more solid on the highway. Course the last one will need to be drilled the other 2 are probably 3m tape. That last one the wing does it say it works on our 6th gen? Does it come painted? Got a link? Also wonder if it will restrict viewing never had a wing that big on any car. You have peeked my interest in it now. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

I’m down to go to the next one u plan I didn’t see this post in time. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Lookin real good man ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

Just got the car back from getting tints 35%. Sadly the glair from the sun makes for a bad pic.

Almost forgot to add on the other side of that black plastic I used quick disconnects for the wires this way I can take that whole plastic part out of the car if I need to without messing with the leds. Sorry it took so many posts but I wanted u to have as much info as needed to do a good job. Best of luck ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

https://www.amazon.com/gp/product/B00Q9M33W0/ref=ppx_yo_dt_b_asin_title_o04_s03?ie=UTF8&psc=1 these are the led strips i used they can be cut down and as you see they are only $16 for a 4 pack.

I should add I didn’t use a fuse cuz we are talking about very low amperage and that circuit is fused already. When figuring out polarity of that white plug I made a jumper w 2 1” pieces of paper clips. That went to alligator clips to my multi meter. It is imperative that they do not touch each other while testing. Once you know which wire is what pull your ground off your battery before you start cutting wires last thing you want to do is blow the fuse or tcm. If the run is too hard consider taking the head unit out. When I did my run I replaced my tan dash anyways so I took the glovebox out as well as the driver side plastic that has the buttons on it. This allowed me to zip tie my wires clean. ————————————————— HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system, More to come...

I dont have pics of it all but basically what you do is remove the lower black plastic parts under the dash as I said I used led strips which have 3m tape on em. ran the wire through the hole that is designed for the oem leds. Where your usb ports are there is a rubber mat. Take that out then pull off the 2 small black plastic sides. Now you can pull up the shifter cover. Doing this you will have to move the car out of park to get it all the way out. Once out you will have access to the cig power from armrest. that white plug is the cig power Wish i remembered the wire colors but i dont so u will prob want to use ur multi meter to figure out what is positive and what is ground. The switch I used had Power, Load, Ground cuz it glows blue when on.