Jump to content
LegacyGT.com

KZJonny

I Donated
  • Posts

    1,601
  • Joined

  • Days Won

    57

Posts posted by KZJonny

  1. Agreed with getting a thorough pre-purchase inspection, specifically compression/leakdown test to get a better idea of engine health.

    I may be biased, since my ‘05 had plenty of minor problems when I picked it up, but they were also all relatively easily solved. That was before I upgraded to “Stage 2”, and took care of all the other minor stuff.

    Assuming an inspection yields good results:

    - do you *like* troubleshooting and working on cars; buy it! That is some low mileage action and oil feeds are an easy repair.

    - if you want a reliable, no nonsense daily (that will be quick…) maybe not the greatest choice?

    My experience so far isn’t that these things are trailer queens, just a solid working knowledge of automotive in general is required. Aside from the odd boxer engine stuff (1.5hr plug swaps), they’re really not particularly challenging to work on.

  2. Also, thanks MaxCapacity.

    I’ve seen those before, but never tried one out. That looks like pretty good light spread. 8000K lumens is impressive, COB led’s have comE a very long way.

    I’ll have to do some looking around. The half of the garage over the lift will Have ~13’ ceilings, and will be the principal work area, so it will have to well lit. Probably going to build an ‘attic’ storage area over the second bay work area, so the height will be more like 10’.

    May call for different lighting fixtures, but definitely good to see those before I figure out where to place the lighting fixtures, and what type they’ll be.

  3. No worry on timing at all. I'm having to make decisions on the fly these days, and at the moment I am not sure I'f I'm going to get garage doors, or just buy some plywood and screw it up once the cars are in for the winter, haha! Things have gotten so much more expensive since I planned this out and wrote a budget, it's killing me. That and the project creep on the GT served to empty my wallet.

    Realistically tho, I think I'm going to save the change and stick with the 8' doors. Barring breakdown type stuff that might change my requirements, I only plan on pulling the GT out in the Spring, and swapping the OB in to keep it out of the way. The Datsun is only like 61" across, so and 8' door is plenty enough, I would hope, to miss hitting anything. This is a workspace and car storage area, not a daily use 'parking garage'. It will also be unheated and uninsulated for the foreseeable future (forever?!), so while I did get insulated doors, they are something like r-9 or r-12? Really wasn't worth the money to go more than that, I was just told they make less rattling noise if they're filled with insulation, and that was the lowest r value available in doors that were steel front and back.

    I actually do have 2 fairly large windows I was able to scavenge from a house being torn down a while back, which can't be more than 7-8 years old, so pretty modern. Each is ~ 3 x 5' which should be enough, when both opened to allow for a pretty good breeze. They will both have to go in the righthand (East) wall, since the other sides are too close to the property line to be allowed to have windows. (Until I get the building signed off on, then I will do whatever the hell I want.) I just do need the framing and window location to be up to code for the time being.

     

    Since I am also going to the trouble of installing the lift, and need vaulted ceilings to do so, it also leaves a tonne of space to install the biggest ceiling fan I can find to help keep things moving inside the building. Much of this will have to be stuff I can scavenge and pick up second hand for cheap, but it should all come together.

    The goal for this year is to get the building up and sheathed in plywood, with air barrier everywhere, and get the lift and some lighting in. The exterior and roofing will have to wait until the Spring, I think. Only so much cash to go around.....

  4. Happy to help. There were plenty more 2005-2006 Legacies in the search hits, but that one looked reasonably undamaged, and should be the right colour, barring extensive sun damage. I'd guess at this point that distinction would be the least of your concerns tho. Maybe you can find something a little closer to you if you spend more time going through the site, but you mentioned Montreal, so I figured that would do....

    You may find a tool like this really handy:

    https://www.amazon.ca/3Pcs-Combo-Repair-Tool-Kit/dp/B081V8NHWP/ref=sr_1_11?keywords=push+pin+removal+tool&qid=1663418913&sprefix=push+pin+re%2Caps%2C73&sr=8-11

    I use these things whenever I'm pulling body plastics off. Saves plenty of broken clips and somc cursing, usually. I imagine you could find one cheaper, even on Amazon, but worth the few dollars.

    I haven't pulled off my bumper in a long time, but am going to have to soon. As noted, it's pretty easy. I don't remember if you need to remove the grill or not, but if so, you'll need at least a 10mm socket/wrench as well to undo a couple of fasteners.

    Post of some photos of the before and after. Cheers!

  5. Might need to double check your search parameters…?

    https://kennyupull.com/part/subaru-legacy-2005-25/

    If that link is good, it’s even the right colour, silver metallic. (Same as mine…) There are a handful of other within an hour or so of driving. Bonus to going to the scrapyard is collecting a handful of body clips for extras from any other Sooby nearby, in case yours break coming out.

    I’ve got a spare blue one in my basement as well, but it’s 2006 blue (?),  and I would bet shipping would be nearly as much as just the cost at Kenny…

  6. 1 minute ago, jaylew said:

    Day 1. The GT is the first car in the new house! I christened the garage with a small bit of oil, on purpose (see blue rag from clean up). The wife thinks I'm weird but what else is new. I'm excited, there is so much room for activities!!

    IMG_6920.JPG

    IMG_6921.jpg

    Oh dude!! That’s making me even more impatient to build mine. It won’t be that big, quite, but still!

    I’m jealous, but once I get my 2-post, I’ll get over it. Hah!

  7. 831544246_planwithlift.thumb.JPG.50fed44422f9ce09a886476ffe1ee8fc.JPG

     

    Playing around the drawings a little, it looks like I should have nearly 2.5' between my car on the lift and the wall on the left (west) side of the building.

     

    Not perfect, but given what I have to work with, I think it will be okay. I don't have more space than that currently, and probably less. That space is also in my driveway up against a brick wall.

    I would consider a single, more central door, but there does need to be room in here for 2 cars in the winter, and very possibly a couple of motorcycles, and 3-4 bicycles..... So, I think this is making the best of the space.

    As MaxCapacity points out, it would be great to move somewhere bigger, but I'd probably take a bath on taxes, and moving, so Ima stay put. Really, for a single person with a car problem, this should be nearly all the space I need to do some regular maintenace, a little fabrication and clear up some space in my house. Considering my house is ~850sqft and this will be 572sqft, I think I've at least got balance of [everything else in life]:[car stuff] about right, haha!!

  8. 10 hours ago, vitaliana said:

    The project looks quite good and is correctly done for a 2-car garage. The layout for my 2-car garage, which is already ready, looks like this. I worked quite a lot on it, but the result is beautiful. The most challenging thing for me, and I assume it will be the same for you, was finding suitable doors for this garage. But everything is possible. I found some garage doors at the sale on https://advantagegd.com/garage-door-sales/, and the specialists recently installed them. Otherwise, you won't have any problem. Everything will be fine.

    Thanks for the confirmation, glad your garage worked out as well!

    I'm a long way from Calgary, so I am using a local shop to provide the doors. I just wish I had bought them last year and stored them somewhere, since they've gone from $2500 for both to $3700 since last fall!

    Did you install 8' wide doors? I am leaning that way since they are considered a "standard" size, and a fair bit less expensive that 9' wide doors. I figured if I can't back my car into an 8' wide garage door and not hit things, then it's probably time to give up driving!

    These are the doors I believe I will be using:

    17459201_garagedoor.JPG.341ea7874ec232a62a99eeed14469cb8.JPG

  9. 30 minutes ago, NORULZleggy said:

    I have 18s, another set of 17s, and my stock wheels also. I am lowered with some gap. These cars just look better a bit lower.

    Hey man, can't argue with personal taste! Low isn't my thing, and the car is lower than stock already, on the Bilsteins. It was on STi pinks when I bought it, and there was damage to the undertrays, and scrape marks all over the stock exhaust and a little on the front clip. This car will pull a trailer, or a go down unmaintained gravel roads to get to a hiking trailhead or mountain biking day, so if I have to sacrifice wheel gap to keep all the bits underneath it looking speccy, that's a tradeoff I'm more than happy to make...

    Of course, on the topic, it looks crap with impact damage to the fender, so let's just see how that works out. 😕

  10. 4 minutes ago, NORULZleggy said:

    It also needs less wheel gap geez lol. Well that does suck. See if it messed up your suspension also😉 so it can get  lowww

    Haha! I was lower when I bought it. I unlowered it, and put some in fresh Spec B Bilsteins. You need to see the roads where I live…

    Handles far better now than it did, and maintains stock appearance which is the goal. It was also originally on 18”s, which went away to he replaced with the mint condition stock rims I found…

  11. 39 minutes ago, pksystems said:

    Started degreasing/steam cleaning the bottom of the engine.  I noticed this dent when I was doing motor mounts, and thought I could replace it later.  Then I noticed the mounts need to come back out to get to the back bolts.  Does this dent on the oil pan look like something I should worry about? (pickup point near there?) or should I just leave it?  There is no leaks from that area. 

    306524317_1227769731113520_6468929081799139634_n.jpg

    Shouldn’t be near the pickup at all, no… that is closer to the front of the pan.

    You’re losing a little oil capacity, but that should be about the worst of it for now… If you have an oil pressure gauge to confirm good pressure, then maybe a problem for another day?

  12. There *is* a Legacy up the road being parted, and I've got a set of doors in the correct colour in my basement, if it comes to that.

    I pay for comprehensive/collision on the GT tho, so as long as the insurance company rules I was not at fault, it's going to be the others guys insurance footing the bill. Part of me wants to DIY this and save someone money, but I have practically zero free time right now, and getting a free rental car while mine gets worked on by a professional sounds pretty good to me.

    If it doesn't go that way, and I need to pay out my $1000 deductible, then things may change, and I'll have to start thinking about how to better spend that money. A full-car respray will be like $4-5K in my area. If I'm not fully covered, I think the money might be better spent being put towards that.... No idea what it will take to refinish the wheel, I expect that could also be fairly expensive.

     

    EDIT: Seems that I was deemed to be "Not at fault" in any way for the collision. So, no change to my insurance ratings or premiums. Insurance will take care of all the repairs at a professional repair shop, at no charge to me at all, and provide a rental while that happens. It's going to cost someone more money than a DIY fix, but there is no option to collect a cheque rather than have repairs done. The only sensible thing to do is to let someone else take care of now. It could've been much worse, nobody was hurt and someone else will spend their time doing the repair. (I've learned my lesson there, nobody else works on my junk but me any longer... except for bodywork and paint.)

  13. Might be marginally off topic, but it applies….

    I have a JMP Custom VF40 installed in my wagon. (ELH, UP, GS catted downpipe and Borla Catback)

    Currently on a COBB OTS stage 2, 91 Octane tune, but fuelling with 93 as long as I can get it.

    The car is an entirely different beast with this setup, and the turbo responds ridiculously quick, and earlier enough in the RPM range to notice. (Took a buddy for a ride who has a stock car, and he noted how much faster mine comes on boost…) I’m very much looking forward to when I can do a pro tune with a 3 port to really let the turbo do it’s thing. Currently at 15psi target boost, which I am pretty sure is holding it back.

    I’ve got nothing but praise for the equipment and the customer service I had with John. In the unlikely event I ever tire of my current setup, I would absolutely be finding a VF52 core (or used BNR 16g??) to have him work his magic on.

    So, not a JMP VF52 review, but hopefully topical.

    • Like 2
    • Thanks 2
  14. 2 hours ago, Febreze Mee said:

    If that ding is the extent of the damage, a quick look around in a local junkyard for a clean fender would save you or insurance so much money. If/when you get a quote for paint/body from a shop the insurance deems appropriate, I'd take the cash the check and pick up another fender from the Pick n Pull for $50 or so. Not sure if insurance acts differently in your country YMMV

    Yeah. I have some questions to ask about how that works. This is my first collision where there is damage that is probably worth more than my deductible. (Second ever, and the first was sliding a bit on a frosted bridge and kissing bumpers…) I don’t know if insurance here will just cut a check for less than a write-off.

    Ideally, because this was totally not my fault, it has nothing to do with *my* insurance and won’t effect my deductibles or insurance rating.

    I’ll need to weight some things, but I also have to consider that I found a set of pristine stock rims, which are hard to get now, and the potential of damage to steering components. I just installed *all* new suspension parts and a rack. If there is any damage to the rest of that, and I don’t have a shop asses that, I’m SOL.

    That said, I had planned to remedy all the bodywork and get a full paint job when I’ve saved enough for it, so the blue fender I have in my parts stash may be a candidate at this point.

    Just a little disheartening after spending $$$ to get her to where she is, and only enjoying the ‘stage 2+’ goodness before being hit by someone….

    • Sad 1
  15. What someone else did to my GT today.88B3C63C-00B0-436B-A5C0-AC41F2ADDFFC.thumb.jpeg.435bb263bfa6f15175b1ba1ed671914c.jpeg42DFF626-B364-4B46-9675-8F215C48673A.thumb.jpeg.0744732c8a4538783799154cb4a655f5.jpeg8D4122C2-9F74-4A6A-88D2-2DB9C7D8D02A.thumb.jpeg.520bd2499683521ca90f639d5d8781e5.jpeg

    Le Sigh.

    Not the end of the world, but still. Kid pulled into traffic on a main road intersection as I was going through at ~55km/h.

    Good having all new brakes at 4 corners…. I wasn’t moving fast when he hit me, but still.

    Fingers crossed the adjuster rules I was not at fault. It’s not so bad, but it won’t be a cheap fix either. I mean, the car needs paint and bodywork anyhow, but this makes me sad.

    • Sad 3
  16. Good new for you then. That'll be about the finishing touch?

    I meet with my friend and former employer who is a contractor tonight to have a quick chat about getting this things rolling. With any luck, I should have forms set up for the pad within a week or two, and pending inspection have that poured before the month, we'll see.

    I doubt somewhat that mine will be faster than anybody else's, since I'll be trying to shoehorn in time to build and finish on top of everything else going on. But, at least I should be able to get the frame up and sheathed before winter, even if it's just finished with polywood and  air barrier It'll be a clean and dry place to store the project cars for the salt season.

    • Like 1
  17. 1 hour ago, Max Capacity said:

    I can understand about wanting a lift, but with your limited space, maybe MaxJacks, except you won't have the full height. But you can move them to the corner when not needed.

     

    I thought about a 2 post lift in my garage, but figured for how often I wouldn't use it, yet had to walk around it all the time, I bought Quick Jacks. 

     

    Sorry you don't have more room. 22ft deep is a little short. Have you thought about selling and getting a house with more space ? 

    You're not wrong... But at the same time I am building the garage specifically to house the lift, as in; I had to get a By-Law variance for the building ($1600 CAD), which required a survery and grade plan to be submitted (~$2500 CAD) just so it would be tall enough to hold a 10k lb BendPak. This garage is essentially a shell to hold the lift I bought, which is fully paid and waiting for delivery.

    I already have a set of QuickJacks, and they will live in whichever bay does not house the lift.

    In a nutshell, moving isn't an option. I'm single, and while I do okay for myself, I bought a "needs some love" starter home ~4+ years ago when the market was just starting to getting a little bullish by spending all of my savings. As it stands now, even selling my place with all the work I've done to it, and with interest rates climbing, I'd be moving to something smaller, probably on a smaller lot if I tried (=smaller permitted garage, and another 18 months of argueing with the city. (+ a repeat of the above expenses).

    The "value" of my house has doubled in the past 4 years, but so has literally everything else. I'm pretty much gonna die in this place, and it's already a little big (850 sqft) for one person and a couple of cats.... Haha!

    I'm still leaning towards the left bay, so the lift won't "split up" the rest of the space in the garage if in use. Should leave enough space to do work on the "side" of the cars, like brakes and suspension. I figure it can't be worse than how I work right now anyway, where I'm squeezed into a 2' space between the car and my house in the sun and rain when I need to do that kind of thing. I also can only work on one side at a time, having to turn the car around to do the other side....

     

    The bigger reason for needing to decide soon, is that I should be pouring a pad in the coming weeks, and I am going to put footings where the lift will stand. Technically it only needs 5" of the required grade of concrete over aggregate, but I talked with my cement guy, (the only person aside from me doing any work on this particular project), and he said it's not a big deal to rebar and pour a couple of footings right onto the compacted earth. Tied into the rest of the pad with a pile of rebar, it's a little overkill but when it comes to lift I'm okay to go a little overboard. It is however, much easier and cheaper to only pour the two footings I need, rather than 3 a choose where I want the life later.... hah!

    I'll probably diary the process here as it goes (been through your build thread MaxCapacity, thank you!) in case anyone is doing the same thing, in a very DIY kind of way. I have some previous experience doing framing and carpentry, so that part is within reach, but the concrete is something I can't afford to get wrong. Pretty much everything else I think I'll be doing myself. No insulation or interior in the foreseeable future, so it's a pretty bare-bones shed... Might even be able to use it this Autumn if I hustle.

  18. 20 hours ago, lagwagon said:

    Does this look like it will fit the front as well? I've got a chronically creaking front sway bar that is a 22mm Whiteline. 

    I can take a quick look. Installing the new RSB mounts got shoved waaay down the priority list while other stuff was going on, so they're still in that box.

    My first guess would be "no", just based on size and mount location, but I bet the mounting holes could be massaged a little to fit. I'll take a picture of how they look mocked up when I have a chance.... So, that is certainly not a hard no.

    Cheers!

    • Thanks 1
  19. Fwiw, I picked up the autoline pro tester, and it has been handy.

    https://www.amazon.ca/AutoLine-Pro-Automotive-Detector-Diagnostic/dp/B07JVT1NG2/ref=asc_df_B07JVT1NG2/?tag=googlemobshop-20&linkCode=df0&hvadid=337141350629&hvpos=&hvnetw=g&hvrand=895112415206176707&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9000774&hvtargid=pla-571637951948&psc=1

    The other methods all around work, but rather than spraying soapy water all over the engine bay, I liked that this would give me a clue where to look for leaks…. I’ve loaned it out to another GT owner who was tracking down some issues as well. Worked a treat finding tiny leaks at his TGV actuators…

    It’s more than a paint can lid for cost, to be sure, but was about the same price as having a smoke test performed at a shop, so I called it a wash, and now have one for keepsies.

  20. Reaching out to others who have had the very great luxury of a 2 car garage in the past, specifically one with a 2 post lift in it, but general opinions are welcome.

    In a nutshell, after over a year of arguing with the city, being told what I can and cannot do, and spending thousands on permitting to be able to build garage that is a useful size (I was going to be limited to 380 sq/ft! Ha!) I am pretty close to pouring a pad. Just need some final approvals. It's nowhere near as big as I would like at ~575 sqft, but I wasn't going to get anywhere with city if I asked for more, so I figure it will be fine. It has to be!

    For general reference, this is where it will sit in my property:

     

    564343421_Propertylayout.thumb.JPG.9746c3126d26115c7229eb94a4253eba.JPG

    (It is the proposed accessory building, note how the driveway is on the left of my house, meaning the straight shot into the garage will be the left bay.)

    Couple other views:

    48520265_FrontElevation.thumb.JPG.a5ac285c22c114cd946e5260544ae303.JPG

    1191283775_SideElevation.thumb.JPG.750e77d3ed7a54cb910f249e7078d7e6.JPG

    And the floor plan:

    720955307_FloorPlan.thumb.JPG.05c604dbd5c345c831ca83e1be6e7f11.JPG

    So, there will be more follow up questions, but the principal ones are this:

    I am leaning towards putting the 2-post lift on the left hand side of the garage for a few reasons:

    -straightest shot from down the driveway

    -farthest from the work area at the far right of the building, behind the man door = furthest from weld spatter, grinding sparks etc...

     

    This is balanced by the downside of not having maximal 360* access to the car on the lift. But, there should be at least 3ft or so even on the wall side of the leftmost bay....

    Lift in the middle bay has the reverse ups and downs, clearly. Closer to potential damage from the work area, but better all around access. More difficut to get in and out of as well. (Much of the rest of the backyard will be a garden and social area, so ideally I won't be driving through it all the time.

    My general idea around it has been this:

    -the garage will be used for working on cars or other projects or winter storage of cars (Legacy and Datsun on an under the lift, probably, leaving some room for work in the winter)

    - so ready, daily access is much less important.

     

    Final question: My plans call for 8' wide garage doors, which are already expensive enough, but there is *just* enough room to squeeze in 9' doors. I personally kinda don't think they'll be necassary, as the Datto is tiny and the GT is under 7' with with the wing mirrors pulled in, but I'd be curious to hear of anyone else's experienced in that regard. I kinda think for the cost, staying with 8' should be enough...

     

    Thanks in advance!

     

  21. You should very pretty safe at those lifts. I'm too lazy to get out a calculator and figure out how much of a driveline angle change that would be over the distance between the differential and the hub, or between the CV centres centres, but not much.

    Without having one in front of me, I'm going to guess that the rear CV axles are say, 20" from joint to joint. So, for the sake of argument make the numbers round, and say you lift the rear 1.5". That is slope of 0.075"/inch, over (again a guess) 20 inches. My mental trigonometry is weak, but I don't think that would exceed the limitations of a CV joint.

    Since I assume all of these lift kits your talking about adjust the strut and spring spacing, and don't change the location of the subframe or diff, you won't be altering the prop shaft angle at all, which I would think would be more important than potentially going through CV's slightly faster than normal.

    I doubt with a 1" front and 1 3/8" rear lift you'll notice any difference. My car has 1/2" saggy butt spacers in it, and I didn't even know until I put new struts in! I was thinking about getting some to raise the rear height just a little. Glad I didn't I suppose, those would have to be loooong studs to fit a stack of spacers like that.

×
×
  • Create New...

Important Information

Terms of Use