Turkeylord

Well, I picked one up at the parts store ( I work there on Saturdays), we'll see how it does. http://i.imgur.com/6alyERl.jpg

The nice thing about adding a tire stem or air line fitting is that you don't have to pump the dang thing, so it's no big deal to just twist the release valve open and release the pressure to stop the flow. A clear filter would be a nice addition and take care of both filtration and visibility. I wonder what the flow rate would be though something like this: http://ecx.images-amazon.com/images/I/21nZU%2BWsnHL.jpg

Well that's the first time I've heard that one. My lines were still pretty supple. The tee is sized right for the lines, so there should be minimal stretching. <shrug>

I used two of them myself on Saturday http://i.imgur.com/qLPlUic.jpg

I added a tire valve stem to mine and used it again on Saturday. Works awesome! http://i.imgur.com/w71tePZ.jpg

http://www.company23.com/VacuumT They should be back in stock soon!

Yes, I believe so. I edited my last post too.

Alright, so I went and found my old oil pickup, and it had an o ring, not that gasket on it. So after digging around, I think #10 is for the oil separator drain back into the pan. #19 in this picture from the service manual. http://i.imgur.com/1yD9qDn.jpg So does that mean #9 is for the pick up? and #26 is for the oil fill tube? Someone else take a look at this as I've gone cross-eyed.

Ok, so I'm confident about it now, but for clarity, some edits: Left #3, Right #10 http://i.imgur.com/j9VXz13.jpg

Bump Where does the 4th #3 go? Pretty sure there were only 3 inbetween the block halves.

I have a quote to do custom cross fittings, but I think my cost was $8.00 each with a big minimum order

kongzilla might be interested in providing his OBXT for fitment...

I believe it's just '05-'06 for LGTs.

Great writeup! BarManBean's BP Kit does a great job of preventing this. If anyone's interested, check the link in his sig. Barbed Tees can be puchased from Company23 now. http://www.company23.com/image/cache/data/subaru/526/526-comp-400x400.jpg

Excellent! Merry Christmas everybody.

Awesome, thanks! EBCS fittings make great stocking stuffers!

http://legacygt.com/forums/showthread.php/grimmspeed-top-mount-intercooler-and-splitter-08-14-wrx-05-234673.html?p=5007513#post5007513

I still watch it...

Blaqk Havok, welcome, and kudos for doing research! Some just come and ask, "Wat do?", so nice work there. If you're keeping the stock intercooler, you might want to look at BMB's BP kit. My vacuum tee can also avoid a common boost/vacuum leak. It's a good idea to secure the rest of the lines with zip-ties too. Good luck!

leave some room on the inside for the resistor - they can be plugged directly into the harness. OR, it would be sweet if you could drop one in with bent leads for the harness, mid-print...

^ Great idea. I did this, but a custom plug would be bettah: http://i.imgur.com/CR1Y9LDl.jpg

Replied and re-sent, hopefully.

Email sent.

Took 4 weeks to get them made this time, but more tees are finally on their way. http://i.imgur.com/Z51De3g.jpg

Tees back in stock @ http://www.company23.com/VacuumT