WRX USA

It was just over $700. They claim better cycle life than lead acid. This battery has a remote jump start feature built in. You don’t even have to pop the hood, you just press the button on one of the included remotes.

I dropped 34 pounds. https://antigravitybatteries.com/products/starter-batteries/automotive/ag-35-rs/

If you like a black with red theme, this place does custom seat belts and you can get red edged black. I'm just about to send mine out to them. https://www.safetyrestore.com/content/74-colored-seat-belts?gclid=CjwKCAjw-eKpBhAbEiwAqFL0mvJq-tB7KTZZi2LmduPxRNZ1nYqluBp5wP1VaHOaztCWmxmN57egTxoCSWgQAvD_BwE

Are the Girodisc rear rotors like the DBA adapter rotors, and compatible with the Legacy parking brake? https://www.fastwrx.com/products/dba-4000-series-sti-adapter-rotor

I picked up a set of JDM black pillars that are airbag compatible. I already have the D-pillars and upper tailgate pieces so I will probably list those soon. A-pillars Left 94010AG050 Right 94010AG040 B-pillars Left 94012AG050 ("SRS Airbag" cover 94067AG110) Right 94012AG040 ("SRS Airbag" cover 94067AG100) C-Pillars Left 94043AG010 ("SRS Airbag" cover 94067AG130) Right 94043AG000 ("SRS Airbag" cover 94067AG120) D-pillars Left 94015AG010 Right 94015AG000

I swapped to my lower profile Yakima racks.

Thank you. Hopefully it's not the last time...

For sure, it’s only overkill until you need it.

I went with one of these: H3R Performance HalGuard Clean Agent Car Fire Extinguisher - 2.5 lb. Red(HG250R) https://a.co/d/8crMsTe It’s probably overkill.

I’ve been tempted to go with one of these: https://throtl.com/products/dss-carbon-imp-driveshafts-dsssush17-c

That’s a misconception of California. Yes there is strict smog testing, but that’s it. There is absolutely no safety inspections like some states on the east coast. You’ll see cars driving on the freeway that seem sketch as hell but they are smogged, registered and may even be insured so they are good to go!

These two are options: https://www.legacyoddsnends.com/ or https://aaronssubieelectronics.com/product-category/wiring-harnesses/

How is JDM hood different?

He’s a great guy! We were hunting down the EDM center console pieces at the same time and while some people would become competitive and not even think about helping others, he did the exact opposite.

@SubOperator This Arnold? https://www.imdb.com/name/nm2048669/?ref_=ext_shr_lnk I’d be interested in a write up of the conversion to RHD beam pattern on the headlights.

I’ve always thought the answer was 3D scanning the JDM Double DIN and then 3D printing a mirror image.

Any pics of the custom brackets? The fit of EDM center console with the JDM double DIN is the most annoying thing in my car that I’d love to address.

I’d be tempted to replace the Outback rails with the sleeker Legacy rails if I removed them.

What are your plans for the B and C pillars, since these aren’t airbag compliant pillars. Also, seatbelts were something that was difficult for me to import before I realized that they won’t work anyways and I got USDM black belts.

I checked the weight on my new wheels. Not bad!

This one? https://www.autoevolution.com/news/this-rolls-royce-station-wagon-is-not-a-rendering-it-can-be-yours-163872.html

I’m not sure if you knew that you can run Z32 brakes:

New wheels just arrived. They only took 9 months. Rays TE37 Saga SL’s in 18x8.5 with a 45 offset in pressed graphite.

This could be an option for you if you do want to get your own analysis: https://www.toromontcat.com/service/fluid-analysis-services/oil-analysis-program

Here are the white Brembo’s I mentioned earlier