1-3-2-4

Hey how much does the OEM SMFW weigh in at?

Yeah but does HIPS work with heat in the car? that's most of the reason why I switched to petg however I had a lazy fedex driver today so another project I wanted to do I have to wait until Monday.. gives me time to tweak the 3d print design

I'm doing another gauge pod myself but this time in ABS because I ran out of petg until Monday I did 0.1mm layer height with 100% infill which is really overkill lol it's only 33% done and has been printing for just about 24 hours now Wed. after work I might go and test fit the pod in the car.. crap just remembered I forgot to get some cut off wheels for my dremel.. a small brad nail makes a good 3mm dowel pin

haha the gauge pod! Im not sure if that card is going to stay up

43.84mm is my longest gauge

i will have to check when I get home.

2262

Perfect! Sent from my iPhone using Tapatalk

I figured the left and right sides would be hard but I expected that printing it now, thanks I will report my findings I don't think I should have any issues now.

what radiator is that?

I wish I did this.. now that I know nothing less then 5w-40 is going in now.

The diameter

First I've heard of this anyplace including bobistheoil guy site

Yep that's what I got at the report as well.. I was going to try Motul X-ecess 8100 but I saw a report vs the new T6 I'm just going to stick with the T6

Hole is too tight

I want to say 1 mm but maybe half.. I printed it in PETg checking with the caliper I'm seeing 50mm for all 3 my gauge sizes are about 52mm I tried to force one in and you can hear the layers cracking due to the stress I just tried a spare Equus gauge and it went in with no problems so my gauges I have are a bit thicker then the normal

Round two.. forgot I had the brim setting on Sent from my iPhone using Tapatalk

Add me to the one that hopes I can find something to work with for the dash vent pod as well Sent from my iPhone using Tapatalk

I'm using Cura so I'm trying to figure out how to enlarge the holes without having to do a lot of sanding.. my wideband came in today it's not as a tight fit as the boost gauge but it's still very tight

I've got '07 Outback wheels on mine

I wonder if gunmetal wheels would look right with this color? I'm debating if I want to change from black to gunmetal.

Ok I will check it out I printed it in petg I had a little first layer issue but I will try again my wideband should be coming in Monday Sent from my iPhone using Tapatalk

I printed out the triple gauge pod from thingverse and for whatever reason my 52mm gauge did not fit Sent from my iPhone using Tapatalk

I'm going to get a 3d printer and try making that triple gauge pod plus a few other things

What exhaust is that?