98legwag Posted May 22, 2013 Author Share Posted May 22, 2013 Well that was a well done project. Improves the flow and makes it look really good Thanks. Just about everyone that has seen it likes it. i didnt realize you used vynil, my bad.. i used fabric... pretty jealous of your skirt finding, ive been looking for months! Its all good. My friend found skirts in better shape than his, so I got the hand me downs...One is a little messed up. His sister borrowed his car, got a flat, and jacked the car up by the side skirt. Link to comment Share on other sites More sharing options...
98legwag Posted May 27, 2013 Author Share Posted May 27, 2013 Installed a rear seat from a 04 wrx wagon yesterday: http://i1098.photobucket.com/albums/g378/98legwag/20130527_094155_zpsf2ba8fbe.jpg Link to comment Share on other sites More sharing options...
Zues Marine Posted May 27, 2013 Share Posted May 27, 2013 dye your carpets black next! Link to comment Share on other sites More sharing options...
98legwag Posted May 28, 2013 Author Share Posted May 28, 2013 Its been a week and the door card inserts are coming unglued in the middle. Link to comment Share on other sites More sharing options...
Zues Marine Posted May 28, 2013 Share Posted May 28, 2013 switch to fabric. .. Link to comment Share on other sites More sharing options...
98legwag Posted May 29, 2013 Author Share Posted May 29, 2013 I have something else in mind. Its already ordered. I may pick up some more inserts from a junkyard. Link to comment Share on other sites More sharing options...
98legwag Posted June 9, 2013 Author Share Posted June 9, 2013 So yesterday I had a busy day. Went to two pick and pull yards and got a bunch of parts. I got an OEM underseat sub and traded it for an Apexi axel back: http://i1098.photobucket.com/albums/g378/98legwag/20130609_131452_zpsb356f994.jpg I also picked up a 2nd set of door card inserts. I recovered them last night and installed today: http://i1098.photobucket.com/albums/g378/98legwag/20130609_131427_zpsbf7dd1b7.jpg I also picked up a JDM power mode and hold switch from a BH Legacy this week: http://i1098.photobucket.com/albums/g378/98legwag/20130606_154653_zps2e43b103.jpg Also got another strut tower cover to trim and replace the one I broke when trimming it in the winter to fit over the strut bar, all weather mats and a leather owner's manual book cover thing from an 05 Legacy: http://i1098.photobucket.com/albums/g378/98legwag/20130609_131457_zpse5ea5517.jpg Link to comment Share on other sites More sharing options...
Heffernan Posted June 10, 2013 Share Posted June 10, 2013 Thumbs up for a local. I would like to do a similar setup with lights mounted in the grill like that on my 3rd gen Outback. Looks great. Link to comment Share on other sites More sharing options...
98legwag Posted June 10, 2013 Author Share Posted June 10, 2013 Thanks! Link to comment Share on other sites More sharing options...
Zues Marine Posted June 11, 2013 Share Posted June 11, 2013 nice find on the power mode button Link to comment Share on other sites More sharing options...
98legwag Posted June 24, 2013 Author Share Posted June 24, 2013 Got bored and gave this guy a new home. http://i1098.photobucket.com/albums/g378/98legwag/20130622_182657_zps50bb4253.jpg Link to comment Share on other sites More sharing options...
DOHCEJ22E1 Posted June 24, 2013 Share Posted June 24, 2013 Devious looking front end. I love it! Link to comment Share on other sites More sharing options...
98legwag Posted June 29, 2013 Author Share Posted June 29, 2013 Here is an update. Last night I went to a friends to try to install the axle back exhaust. Turns out my exhaust is so rusted that even a torch couldn't get the nuts and bolts on it to break lose. Its not leaking, but at this point we decided not to mess with it and break anything. We also started on the JDM power mode switch from a 3rd gen, but we could not get it to look clean like it was meant to be in a 2nd gen, so we again decided to scrap that project for now. On the plus side I did get a pic of my car at night with all the lights on. Oh and he gave me another Hella 500, so I now have a spare. http://i1098.photobucket.com/albums/g378/98legwag/20130628_224701_zps331d1fbf.jpg Link to comment Share on other sites More sharing options...
98legwag Posted July 1, 2013 Author Share Posted July 1, 2013 So my project for Sunday was a small but time consuming one. I wanted to make the JDM power/hold switch look clean in my car. This is proving to be a little harder than I thought since it came from a BE/BH. I started with a holder thing for the center console I took out of my car a while back. I cut an opening for the wiring harness to come through and test fitted the switch: http://i1098.photobucket.com/albums/g378/98legwag/20130630_105853_zps0a813d0a.jpg Once I decided I like that placement I decided to make a cover to try and make the whole thing look more clean. I started with a cardboard template, which I didn't take picture of. Then moved on to a piece of plastic I cut out of my grill when installing the Hella 500s: http://i1098.photobucket.com/albums/g378/98legwag/20130630_204326_zpsf0f5f210.jpg All in all, for using a Dremel for the cutting it turned out OK. I am going to redo it with something easier to work with, like gravoply. I hope to get it to my liking and get it wired in soon. Link to comment Share on other sites More sharing options...
Kiyo1990 Posted July 3, 2013 Share Posted July 3, 2013 Really doesn't look all that bad man Link to comment Share on other sites More sharing options...
98legwag Posted July 3, 2013 Author Share Posted July 3, 2013 I just need to clean it up. I am going to sand the sides flat and see how it fits. Then just paint it black and go from there. I am still working on this, need to fit my side skirts, paint the front lip to match the paint on the side skirts, find a rear lip, and that is it for now. I will probably do the front SS brake lines when I have to change the pads next. Link to comment Share on other sites More sharing options...
98Wagon Posted July 4, 2013 Share Posted July 4, 2013 Nice wagon man! Really like it! What kind if wheels are those? They look sharp! And what size wheel/tire combo did you go with? Link to comment Share on other sites More sharing options...
98legwag Posted July 4, 2013 Author Share Posted July 4, 2013 Nice wagon man! Really like it! What kind if wheels are those? They look sharp! And what size wheel/tire combo did you go with? Thanks man. The wheels are Drag DR34's. They are 17x7.5 +45. Tires are 205/45/17 Nitto Neogens. I love the tires. Very good grip in the dry and wet. OK in the snow. Link to comment Share on other sites More sharing options...
98legwag Posted July 6, 2013 Author Share Posted July 6, 2013 Here is what I have done so far today. I took the 3rd gen din pocket with lid and trimmed it to fit the button in: http://i1098.photobucket.com/albums/g378/98legwag/20130706_110501_zps85de1ea5.jpg In that picture it was still plastidipped. You can also see where the dremel slipped. I this one it has been covered with vinyl to match the dash pieces around it. I just need my friend to solder it in. I already have a fog light switch working for the power mode. I will reuse the ground set up of that. This is going in under the radio so I will tap power of that for the light in this switch. Hopefully will get it put in next weekend. http://i1098.photobucket.com/albums/g378/98legwag/20130706_133750_zps3c4fdbde.jpg Link to comment Share on other sites More sharing options...
scoobydoo73 Posted July 9, 2013 Share Posted July 9, 2013 looks nice in the cf wrap. Link to comment Share on other sites More sharing options...
98legwag Posted July 10, 2013 Author Share Posted July 10, 2013 Thanks. Once my friend is done rebuilding the engine in his Toyota truck the button will be soldered in and ready to go. Link to comment Share on other sites More sharing options...
98legwag Posted August 3, 2013 Author Share Posted August 3, 2013 A few pics from a meet last night: http://i1098.photobucket.com/albums/g378/98legwag/20130802_193928_zps204db0ce.jpg http://i1098.photobucket.com/albums/g378/98legwag/20130802_195334_zpse1ac4e58.jpg http://i1098.photobucket.com/albums/g378/98legwag/20130802_201051_zps6507c525.jpg http://i1098.photobucket.com/albums/g378/98legwag/20130802_202959_zps56224baa.jpg Link to comment Share on other sites More sharing options...
98Wagon Posted August 3, 2013 Share Posted August 3, 2013 How's it run man? It's looking good! Link to comment Share on other sites More sharing options...
Zues Marine Posted August 3, 2013 Share Posted August 3, 2013 we need to get you a new grill, mesh isnt working with the rest of your car so slick! Link to comment Share on other sites More sharing options...
98legwag Posted August 3, 2013 Author Share Posted August 3, 2013 How's it run man? It's looking good! It runs well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.