Jump to content
LegacyGT.com

Zues Marine

Mega Users
  • Posts

    4,166
  • Joined

Everything posted by Zues Marine

  1. in pretty much every year except the '95... there is a rubber pop-out grommet
  2. When i did the AT to MT swap, I had to drill a hole in the firewall for the hydraulic pump in the 95' at least
  3. My speedo stopped working... so ive had about 235xxx for a year now
  4. Just to clarify; The outback struts are taller, there is no spacer increasing the ride height. Spacers may be needed to level out the aesthetics of the car due to the larger diameter of the front wheel well, compared to the rear one.
  5. thats really all there is to it if youve not figured it out yet.. I believe there is a line for the trans at a cold temp and one for when its hot
  6. nice, i like the look of the non GTs lowered.. and i have a dent in the same spot on the other side of my car, Ha!
  7. so did you go with the ultimos or the normal ones? I've been considering the Ultimos for a while now
  8. My VSS stopped reading speed at 235,942 i've got at least another 5k on there since that happened..should prolly fix that
  9. my right rear pads just started the death squeal, my shits falling apart
  10. I'm running that 25mm bar up front and a 22mm in the back, it's pretty balanced. don't run these on stock endlinks though
  11. yep, offset is key... running a 17x7 with 225s and i am centimeters away from the strut
  12. It's all good, I found a guy selling one locally for $50 with all the hardware!
  13. I was just looking for the OB one for now so I can paint my car, if you're out there and can snag it i'd take it in a heartbeat!
×
×
  • Create New...

Important Information

Terms of Use