DRoc7822 Posted March 4, 2012 Share Posted March 4, 2012 A guy on here has done it... and had a shop do everything. Said it was around 10k for everything. But that was with buying a brand new STI transmission to. So Im sure if you could find parts used for a lot cheaper.. it would cost a lot less. Ive put together a list of everything that I think would need to be done. And I calculated it around 7500-8k in parts and labor. But just guessitmated on the labor. Link to comment Share on other sites More sharing options...
AZP Installs Posted March 4, 2012 Share Posted March 4, 2012 That is a lot of coin on a car worth $8k-10k which is what an 05lgt is worth these days. I will have to discuss with our custy and see what route to go on it. -mike http://www.pbase.com/paisan/image/91072632.jpghttp://www.pbase.com/paisan/image/141039922.jpg http://www.pbase.com/paisan/image/133406601.jpg http://upload.pbase.com/image/137566671.jpg 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Call directly as We carry almost every manufacturer now, so before you buy parts call us. AIM: AZP Installs | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
ClimberDHexMods Posted March 5, 2012 Share Posted March 5, 2012 Im interested in swapping my 08's. Any advice beside the typical electrical gremlins and crossmember BS? I dont know if they changed any mounts and what not in 08 compared to 05. Theres a local 05 lgt 5mt thats being parted out... I inquired about the tranny, clutch pedal assembly, master cyl, shifter housing and linkages, and driveshaft. Ill be reading up some more... I believe the 05-09 transmissions should mount up the same, but I have not confirmed this. Though when it comes to fabrication, a transmission mount is not nearly as difficult as other things. [CENTER][B][I] Front Limited Slip Racing Differentials for the 5EAT now available for $1895 shipped, please inquire for details! [/I][/B][/CENTER] Link to comment Share on other sites More sharing options...
bmx045 Posted March 5, 2012 Share Posted March 5, 2012 that's now put on the way back burner Link to comment Share on other sites More sharing options...
DRoc7822 Posted March 6, 2012 Share Posted March 6, 2012 Everything bolts in to my knowledge except for the cross member. The auto cross member needs to be fabbed up to fit the manual. Nothing a shop cant handle. Link to comment Share on other sites More sharing options...
bmx045 Posted March 6, 2012 Share Posted March 6, 2012 My concern is the tcu ecu dash gauge cluster wiring bullshit Link to comment Share on other sites More sharing options...
naCAnItihS Posted March 6, 2012 Share Posted March 6, 2012 (edited) You would just need the dash harness, ecu, cluster, etc from the donor car as well. But everything mechanically will bolt right up. Also anyone interested all the swap stuff just shoot me a pm. I'll unload it wayyy cheaper than you guys have priced it out... Edited March 6, 2012 by naCAnItihS Link to comment Share on other sites More sharing options...
DRoc7822 Posted March 6, 2012 Share Posted March 6, 2012 (edited) All has to come from the same car too... if not.. car wont start. Theres a thread on here where you grind down the neutral safety switch in order for the car to behave like a manual. But one of the lights on the dash will stay on. Not to sure on the exact details (it was a lil over my head... and kind of didnt understand it) but getting everything from the same car is prolly the best option. Edited March 6, 2012 by DRoc7822 Link to comment Share on other sites More sharing options...
Hilux Posted June 23, 2012 Share Posted June 23, 2012 So has anyone actually tried using the collective immobilizer/ecu setup to enable cruise and eliminate the CANBUS error? Link to comment Share on other sites More sharing options...
Leonardo Posted June 25, 2012 Share Posted June 25, 2012 Collective immobilizer?! Link to comment Share on other sites More sharing options...
Hilux Posted June 26, 2012 Share Posted June 26, 2012 The body control unit, ecu, gauge cluster, and anything else related to the immobilizer system. Link to comment Share on other sites More sharing options...
LegacyMUN2k6 Posted June 26, 2012 Share Posted June 26, 2012 Link to comment Share on other sites More sharing options...
frank_ster Posted June 27, 2012 Share Posted June 27, 2012 thats uh .. backwards .. this is about auto to mt conversion .. we can start another thread for mt to auto conversion witch is of coarse the smart thing to do. Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
Grinchy Posted June 22, 2013 Share Posted June 22, 2013 I got behind in this thread, and I'm honestly too lazy to read through everything right now. Simple answer. Did he actually go through with it yet? Link to comment Share on other sites More sharing options...
InTheBay Posted November 28, 2014 Share Posted November 28, 2014 Yes, you need to fab a custom trans-member, but it can be done. In addition to that answer for @grinchy, I'm still confused on the wiring side of things for this swap. I thought that 05-07 weren't CAN bus cars? Did the ECU end up being needed to be swapped with one from a MT car? If not needed, would it otherwise be a good idea, or just a waste of money? Whats the consensus on a cluster swap, it's only needed to eliminate the CAN bus error? Link to comment Share on other sites More sharing options...
frank_ster Posted November 28, 2014 Share Posted November 28, 2014 05+ cars are can bus. acording to throttle happy you can load a sister rom from a manual car into a auto car. and this can be done with a working auto trans ahead of time. Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
ESP Dyno Posted November 29, 2014 Share Posted November 29, 2014 Running the original auto ECU, original cluster. Once the TCM is unplugged, all the tranny related lights in the cluster go away, as does the lighting around the P R N D 2 1 on the cluster. Wiring is very simple doing it this way. You will lose cruise control and get an ERR that displays on the odometer. This goes away when you toggle through the trip logs on the odometer but pops back up when you are done. The cluster is identical other than the PRND21 on there. Nobody every notices it. Most people can't believe the car is not a manual from the factory. 70K miles running the car this way and it has been great. www.EnhancedStreetPerformance.com www.facebook.com/EnhancedStreetPerformance Link to comment Share on other sites More sharing options...
AZP Installs Posted November 29, 2014 Share Posted November 29, 2014 The problem with not having cruise and having the odometer with an error is an issue that as a professional installation can't be something that goes out the door unfortunately. I have yet to see a professional installation done yet on an 05-09 from AT to MT. -Mike Paisan http://www.pbase.com/paisan/image/153798190.jpg Maintaining, Modifying and Educating TriState Enthusiasts since 2001. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
ESP Dyno Posted November 30, 2014 Share Posted November 30, 2014 Considering this for a custy but it looks like it may be cost prohibitive, to do it on a professional level. -mike Well I guess you just answered your own question. Apparently it is too cost prohibitive to do then www.EnhancedStreetPerformance.com www.facebook.com/EnhancedStreetPerformance Link to comment Share on other sites More sharing options...
frank_ster Posted November 30, 2014 Share Posted November 30, 2014 would one of you guys try loading the manual rom image into the car see if that makes the error go away ? Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
frank_ster Posted November 30, 2014 Share Posted November 30, 2014 Running the original auto ECU, original cluster. Once the TCM is unplugged, all the tranny related lights in the cluster go away, as does the lighting around the P R N D 2 1 on the cluster. Wiring is very simple doing it this way. You will lose cruise control and get an ERR that displays on the odometer. This goes away when you toggle through the trip logs on the odometer but pops back up when you are done. The cluster is identical other than the PRND21 on there. Nobody every notices it. Most people can't believe the car is not a manual from the factory. 70K miles running the car this way and it has been great. ah cool .. the lights in the cluster related to the at are powered by the tcu haha ! its kinda cool, thanks for that heads up ! Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
ESP Dyno Posted November 30, 2014 Share Posted November 30, 2014 Yeah, when I unplugged that it made most of those go away. Nothing in the ecu will make a difference in the can bus error however you will need to turn p700 codes off related to the tranny. From what I can remember, when I compares the wiring diagrams of the manual and auto lgt, there were quite a few differences, especially when it came to the cruise control. The tcm seemed to play a big part in the cruise control on the automatic. Even the abs units were different from one to the other. Hence why I stopped the install where I did, instead of replacing half the car. www.EnhancedStreetPerformance.com www.facebook.com/EnhancedStreetPerformance Link to comment Share on other sites More sharing options...
frank_ster Posted December 1, 2014 Share Posted December 1, 2014 Well try to load a manual rom ingot a good feeling that will take care of the issue . Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
Tuning Alliance Posted December 1, 2014 Share Posted December 1, 2014 Well try to load a manual rom ingot a good feeling that will take care of the issue . Well in the case of ESP's car it may be more difficult as the level of modifications (hybrid speed density etc:wub:) would make it challenging to patch to a sister rom and retain these advanced capabilities. Although I suppose for the sake of testing it could be done. Contact us for all your tuning and performance parts needs! Etuning the legacy community since 2008! Follow us on FACEBOOK | INSTAGRAM [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
frank_ster Posted December 1, 2014 Share Posted December 1, 2014 Well if it was done to the manual rom to begin with it would be fine also . But if it wasnt a big deal to try it would help the community Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now