Waxiboy Posted November 29, 2017 Share Posted November 29, 2017 They have manual bolts you can use to adjust them. Did just that. Top is the JDM headlight with flipped shields, no washer, filled hole. Bottom is USDM headlight with 1 washer, bent cover on hole, Koito ballast & Osram D2S capsules. Link to comment Share on other sites More sharing options...
JohnnyWas Posted November 30, 2017 Share Posted November 30, 2017 So i have an 06 with Rev a-c jdm Spec B front end (bumper bar/headlight brackets). However the rev d-f is really growing on me. Will this bolt up to my 06? Wanna sell me that lip?? Link to comment Share on other sites More sharing options...
BL5BO Posted December 1, 2017 Share Posted December 1, 2017 Wanna sell me that lip?? It was another member's photo lol, otherwise i would haha My "Alpine White" 06 LGT: The Kabigon [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
BP5TBSTI Posted December 1, 2017 Share Posted December 1, 2017 Good question, I've read conflicting accounts and haven't actually found a walkthrough for it. I'll start with the beam (no foam) and see what happens. If the beam only needs a bit of work, then I'll probably do that, if it needs to get mostly tore up, then I'll probably just remove it so I have the option of putting it back. The front only required the foam removed and corners shaved by a sabersaw, we'll see what happens for the rear. The 03-08 JDM Legacy Wagon doesn't use any type of crash beam due to Japanese Dot standards. Thus it is the shortest bumper length of all the legacy wagon versions in the world. My buddy used a EDM beam and cut it down to size + using the EDM beam brackets in order to have a crash beam on the rear JDM Wagon Bumper. Just FYI. Link to comment Share on other sites More sharing options...
BP5TBSTI Posted December 1, 2017 Share Posted December 1, 2017 So i have an 06 with Rev a-c jdm Spec B front end (bumper bar/headlight brackets). However the rev d-f is really growing on me. Will this bolt up to my 06? Also JDM Engine undertray. Link to comment Share on other sites More sharing options...
Waxiboy Posted December 1, 2017 Share Posted December 1, 2017 The 03-08 JDM Legacy Wagon doesn't use any type of crash beam due to Japanese Dot standards. Thus it is the shortest bumper length of all the legacy wagon versions in the world. My buddy used a EDM beam and cut it down to size + using the EDM beam brackets in order to have a crash beam on the rear JDM Wagon Bumper. Just FYI. I was thinking of doing this hack to the rear beam (from an older post). Cut 2-3 inches and braze it back on. Seems aluminum brazing can be a DIY project. Link to comment Share on other sites More sharing options...
Infosecdad Posted December 1, 2017 Share Posted December 1, 2017 The 03-08 JDM Legacy Wagon doesn't use any type of crash beam due to Japanese Dot standards. Thus it is the shortest bumper length of all the legacy wagon versions in the world. My buddy used a EDM beam and cut it down to size + using the EDM beam brackets in order to have a crash beam on the rear JDM Wagon Bumper. Just FYI. Yep, I'm a no-beam at the moment. If I can find another one or break down and cut mine I'll do it. But have a lot of holiday stuff to take care of first. Link to comment Share on other sites More sharing options...
Knapp Posted December 3, 2017 Share Posted December 3, 2017 Do any of you guys know where to find a JDM rear window? I'd like to add a rear wiper in the future but I have been unable to find the rear window. I looked on Japanese parts.com, but I could be looking in the wrong place. If anybody knows let me know please! Link to comment Share on other sites More sharing options...
famaya26 Posted December 3, 2017 Share Posted December 3, 2017 Importer but from what I have heard, it’s very hard to get them due to it being glass. Link to comment Share on other sites More sharing options...
famaya26 Posted December 4, 2017 Share Posted December 4, 2017 For you Sedan prefacelift guys looking for a JDM rear bumper https://www.ebay.com/itm/04-09-SUBARU-LEGACY-BP-BL-BLACK-DUAL-EXHAUST-PORT-OEM-BUMPER-JDM-EZ30-EJ20/272305640521?hash=item3f66ae5449:g:ZUIAAOSwm3paD825&vxp=mtr https://www.ebay.com/itm/JDM-Subaru-Legacy-STi-Spec-B-OEM-Rear-Bumper-Splash-Guards-2005-2009-BP5-Sedan/132145830015?fits=Model%3ALegacy&epid=722784369&hash=item1ec481587f:g:y2gAAOSwnCFaDhZu&vxp=mtr Link to comment Share on other sites More sharing options...
Kojak Posted December 12, 2017 Share Posted December 12, 2017 For all the wagonistas who covet the Mach V wing, here's your chance: https://www.ebay.com/itm/subaru-legacy-outback-gt-bp5-liberal-spoiler-wing-wagon-mach-v-sti-jdm/222752254311?hash=item33dd11a967:g:IG4AAOSwbkVaFiXt Link to comment Share on other sites More sharing options...
Waxiboy Posted December 27, 2017 Share Posted December 27, 2017 Rev A-C Spec B nose cut https://www.ebay.com/itm/JDM-Subaru-Legacy-BP5-03-09-Front-End-Bumper-Fenders-Hood-Headlights-EJ20X-TURBO/173041632255?hash=item284a15c3ff:g:xIoAAOSwg8taOa5K&vxp=mtr Link to comment Share on other sites More sharing options...
famaya26 Posted December 27, 2017 Share Posted December 27, 2017 Rev A-C Spec B nose cut https://www.ebay.com/itm/JDM-Subaru-Legacy-BP5-03-09-Front-End-Bumper-Fenders-Hood-Headlights-EJ20X-TURBO/173041632255?hash=item284a15c3ff:g:xIoAAOSwg8taOa5K&vxp=mtr They also have a Sports bumper nose cut in white. Not listed on the site but a friend saw it when he picked up a motor from them last week Link to comment Share on other sites More sharing options...
rhino6303 Posted December 27, 2017 Share Posted December 27, 2017 I'd really like to pick that up; it's even the correct color. Two issues though: 1. I can't spend $800 on it. 2. You can never see the condition of the paint from pictures so then I go back to 1 because I'd have to get a respray probably. Link to comment Share on other sites More sharing options...
famaya26 Posted December 27, 2017 Share Posted December 27, 2017 I'd really like to pick that up; it's even the correct color. Two issues though: 1. I can't spend $800 on it. 2. You can never see the condition of the paint from pictures so then I go back to 1 because I'd have to get a respray probably. Will require a respray. I got my 3.0R Bumper from them. Was not perfect but it was not in terrible condition. The grill looks a bit bad on this clip. Link to comment Share on other sites More sharing options...
Waxiboy Posted December 27, 2017 Share Posted December 27, 2017 I'd really like to pick that up; it's even the correct color. Two issues though: 1. I can't spend $800 on it. 2. You can never see the condition of the paint from pictures so then I go back to 1 because I'd have to get a respray probably. 1. You can ask the seller if he is willing to sell the just the nose, you do not need the hood and bumper. 2. If you are pretty crafty, you can DIY with a kit from paintscratch.com. Link to comment Share on other sites More sharing options...
WRX USA Posted December 27, 2017 Share Posted December 27, 2017 1. You can ask the seller if he is willing to sell the just the nose, you do not need the hood and bumper. 2. If you are pretty crafty, you can DIY with a kit from paintscratch.com. Also rhino6393, don’t you have JDM headlights already so it’s just the bumper and grille that you really need? Link to comment Share on other sites More sharing options...
rhino6303 Posted December 27, 2017 Share Posted December 27, 2017 Also rhino6393, don’t you have JDM headlights already so it’s just the bumper and grille that you really need?Yes. Link to comment Share on other sites More sharing options...
famaya26 Posted December 27, 2017 Share Posted December 27, 2017 https://www.japanparts.com/parts/detail/32529 https://www.japanparts.com/parts/detail/40814 https://www.japanparts.com/parts/detail/34933 A few pieces on my wishlist Link to comment Share on other sites More sharing options...
WRX USA Posted December 28, 2017 Share Posted December 28, 2017 https://www.japanparts.com/parts/detail/32529 https://www.japanparts.com/parts/detail/40814 https://www.japanparts.com/parts/detail/34933 A few pieces on my wishlist The Twin Tube LED blinkers come up on Yahoo Japan Auctions. Thats where I got mine. Link to comment Share on other sites More sharing options...
Waxiboy Posted January 2, 2018 Share Posted January 2, 2018 Rev A-C Spec B nose cut https://www.ebay.com/itm/JDM-Subaru-Legacy-BP5-03-09-Front-End-Bumper-Fenders-Hood-Headlights-EJ20X-TURBO/173041632255?hash=item284a15c3ff:g:xIoAAOSwg8taOa5K&vxp=mtr Wonder who from here snagged this...marked as sold already Link to comment Share on other sites More sharing options...
famaya26 Posted January 2, 2018 Share Posted January 2, 2018 Wonder who from here snagged this...marked as sold already Hopefully They also have a Sports Bumper Clip in white but its not listed on eBay Link to comment Share on other sites More sharing options...
famaya26 Posted January 11, 2018 Share Posted January 11, 2018 https://www.ebay.com/itm/Subaru-Outback-Legacy-BP5-Front-End-Conversion-Nose-Cut-JDM-Subaru-Nose-Cut/263426483434?hash=item3d557124ea:g:fL4AAOSwSKtaU-d8 Link to comment Share on other sites More sharing options...
JohnnyWas Posted January 29, 2018 Share Posted January 29, 2018 http://i64.tinypic.com/mb5mie.jpg Finally amassed all my necessary pieces for my kouki facelift! Cant wait to fill the bottom airdam with my FMIC Also need to get these fenders painted ~ will likely mount them to roll & pull them before I send them off to the painters tho... Link to comment Share on other sites More sharing options...
xt2005bonbon Posted January 29, 2018 Share Posted January 29, 2018 I bit the bullet last week and committed to buy facelift edm outback hid headlights, grille, front bumper, bumper beam, and fenders. I chose to go that route instead of buying a complete nose cut cause I had a really good deal. Now, I want to make sure I don't forget anything... The seller is willing to include anything else that I need (e.g. wiring harness, plastic clips,etc...). I am getting these headlights (see below). Do these have additional support brackets to hold them in place? Anything else I am forgetting? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now