Lgtmark Posted May 24, 2014 Share Posted May 24, 2014 http://img.tapatalk.com/d/14/05/24/ydana2ur.jpg That is perfectly level ground. I really want coilovers so I don't have to mess with spring/strut setups anymore. Those Koni's sit perfect though, might just switch to those later for cost effectiveness Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
jakesurfin Posted May 24, 2014 Share Posted May 24, 2014 It does look like it sits higher in the front. are the springs sitting perfect in the front strut bottom spring mount? I kinda want to go lower with my lgt but I don't want to lose the handling that I have now. Link to comment Share on other sites More sharing options...
Lgtmark Posted May 24, 2014 Share Posted May 24, 2014 Yeah the springs are sitting perfect in cup. Did you have to use saggy butt spacers? Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
jakesurfin Posted May 24, 2014 Share Posted May 24, 2014 Nope. Not at all. Link to comment Share on other sites More sharing options...
SleeperLGT Posted May 25, 2014 Share Posted May 25, 2014 I have wagon specific swift springs with spec b bills. It sits perfectly even. I hear that the spec b bilstein tophats make the fronts sit a tad higher. Switch to wagon specific swifts if u want an even ride. http://i24.photobucket.com/albums/c8/jaycashmoney10/20140517_152709_RichtoneHDR_zps2ahsyv12.jpg Link to comment Share on other sites More sharing options...
Lgtmark Posted May 25, 2014 Share Posted May 25, 2014 Oh yeah, that might help. I have the bilstein HD's on sedan specific springs. Thanks for the input guys, I appreciate it. I will have to buy the wagon springs when I have the money. The front end being an inch higher than the rear bothers me lol Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
510Finn Posted May 26, 2014 Share Posted May 26, 2014 Oh yeah, that might help. I have the bilstein HD's on sedan specific springs. Thanks for the input guys, I appreciate it. I will have to buy the wagon springs when I have the money. The front end being an inch higher than the rear bothers me lol Sent from my SCH-I545 using Tapatalk I put BP (wagon) springs in the rear and didn't use any saggy butt spacers. These are the JDM Legacy STi pink springs on the factory Spec.B Bilsteins. The part no's are in the "Best pink springs" thread I believe.http://img.tapatalk.com/d/14/05/27/ju2aqy6a.jpg Sent from my Nexus 5 using Tapatalk 08 Spec B details Link to comment Share on other sites More sharing options...
BigBlack-V Posted May 27, 2014 Share Posted May 27, 2014 pic thanks for Nrw I was 0. And I'm still a zero. Link to comment Share on other sites More sharing options...
Max Capacity Posted May 27, 2014 Share Posted May 27, 2014 Nice front lip there buddy. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Strizzy Posted May 29, 2014 Share Posted May 29, 2014 http://www.strizzyphoto.com/photos/i-xJNX3m8/0/L/i-xJNX3m8-L.jpg http://www.strizzyphoto.com/photos/i-3Jr4GP2/0/XL/i-3Jr4GP2-XL.jpg My bad luck build Link to comment Share on other sites More sharing options...
.Catalyst. Posted May 29, 2014 Share Posted May 29, 2014 New grill looks great Strizzy! My spec.B [#163] Project Thread with Pictures Get CryoTuned! Link to comment Share on other sites More sharing options...
Strizzy Posted May 29, 2014 Share Posted May 29, 2014 Thanks! I ended up repairing it. Pretty much impossible to notice it was even damaged, except for a tiny area on one of the mounting tabs. Even then, you'd still have to know what you are looking for. And it's highly unlikely it will break at the repair. Next up will eventually be a JDM front bumper, fenders, and LHD EDM headlights. My bad luck build Link to comment Share on other sites More sharing options...
Hannya Posted May 29, 2014 Share Posted May 29, 2014 Thanks! I ended up repairing it. Pretty much impossible to notice it was even damaged, except for a tiny area on one of the mounting tabs. Even then, you'd still have to know what you are looking for. And it's highly unlikely it will break at the repair. Next up will eventually be a JDM front bumper, fenders, and LHD EDM headlights. Grille from HKC-Speed? Link to comment Share on other sites More sharing options...
Lgtmark Posted May 30, 2014 Share Posted May 30, 2014 Those lights are savage! Love them! Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
jakesurfin Posted May 30, 2014 Share Posted May 30, 2014 Nice to see everyone steppin it up with their QSM's! Lookin good! Link to comment Share on other sites More sharing options...
BigBlack-V Posted May 30, 2014 Share Posted May 30, 2014 Qsm lettering Ftw http://i529.photobucket.com/albums/dd340/Jay04WRX/30A9AB7F-9EF8-4202-B4B2-0909D66E62F8_zpshcjm4iqi.jpg I was 0. And I'm still a zero. Link to comment Share on other sites More sharing options...
KBGRIZZLY64 Posted May 30, 2014 Share Posted May 30, 2014 Looks good bet you wouldn't realize is true color until you were right up on it though. Sent from my HTC6525LVW using Tapatalk Priorities change when car parts come into the equation Link to comment Share on other sites More sharing options...
BigBlack-V Posted May 30, 2014 Share Posted May 30, 2014 Looks good bet you wouldn't realize is true color until you were right up on it though. Sent from my HTC6525LVW using Tapatalk its subtle, just what i was looking for I was 0. And I'm still a zero. Link to comment Share on other sites More sharing options...
KBGRIZZLY64 Posted May 30, 2014 Share Posted May 30, 2014 Sticker or paint? Sent from my HTC6525LVW using Tapatalk Priorities change when car parts come into the equation Link to comment Share on other sites More sharing options...
BigBlack-V Posted May 30, 2014 Share Posted May 30, 2014 paint with a powder clear over it for protection I was 0. And I'm still a zero. Link to comment Share on other sites More sharing options...
KBGRIZZLY64 Posted May 30, 2014 Share Posted May 30, 2014 Gotta love someone who does it right the first time Sent from my HTC6525LVW using Tapatalk Priorities change when car parts come into the equation Link to comment Share on other sites More sharing options...
TtotheJ16 Posted June 18, 2014 Share Posted June 18, 2014 Quick pic I took the other day... http://i3.photobucket.com/albums/y87/TtotheJ16/Car/67CC99ED-D238-4060-A578-58A5887C8C9F_zpse2tnlzsi.jpg Who wants to trade me my Spec.B side skirts for Non-Spec ones? Hit me up Link to comment Share on other sites More sharing options...
subie3429 Posted June 19, 2014 Share Posted June 19, 2014 http://i1336.photobucket.com/albums/o657/subielgt3429/20140617_190440_zps939954f9.jpg Link to comment Share on other sites More sharing options...
Lgtmark Posted June 20, 2014 Share Posted June 20, 2014 http://img.tapatalk.com/d/14/06/20/dy6e5yjy.jpg Gave her a bath today! Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
dustdown Posted June 24, 2014 Share Posted June 24, 2014 I just joined the QSM crew on Saturday. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now