fishbone Posted October 17, 2016 Share Posted October 17, 2016 (edited) Only if I don't end up using a prybar and sledgehammer, because after trying it the first time and failing, second time I'm definitely going to be more pissed. The only items I took out were the glovebox (basically just the door that opens), and the covers for the air filter. Maybe others have had success with that, but I did not. The whole passenger side bottom plastic part under the dashboard needs to come out, otherwise I don't see how the job can be accomplished, and I have yet to see a DIY guide for that part. Luckily, I have the Legacy service manual. And I am comfortable pulling the stereo out since I've done it 3 times while doing a proper AUX-IN mod. Edited October 17, 2016 by fishbone Link to comment Share on other sites More sharing options...
mars_volta Posted October 27, 2016 Share Posted October 27, 2016 Taking my car in tomorrow. Link to comment Share on other sites More sharing options...
Scooby2.5 Posted October 28, 2016 Share Posted October 28, 2016 Only if I don't end up using a prybar and sledgehammer, because after trying it the first time and failing, second time I'm definitely going to be more pissed. The only items I took out were the glovebox (basically just the door that opens), and the covers for the air filter. Maybe others have had success with that, but I did not. The whole passenger side bottom plastic part under the dashboard needs to come out, otherwise I don't see how the job can be accomplished, and I have yet to see a DIY guide for that part. Luckily, I have the Legacy service manual. And I am comfortable pulling the stereo out since I've done it 3 times while doing a proper AUX-IN mod. Follow this and then you will have access to the actuators on the passenger side. http://legacygt.com/forums/showthread.php/installation-cabin-air-filter-56k-warning-1626.html?t=1626&highlight=cabin+air Link to comment Share on other sites More sharing options...
waynieRS Posted October 28, 2016 Share Posted October 28, 2016 i popped in to my local subie dealer in WA australia to get some touch up paint for a stone ship ... the service advisor went and got my chassis number (and dam she was hot and knew what she was doing )... and she advised me that my car is due for a air bag recall... and that they will need the car for the day ...... and i thought while they have the dash apart it would be a good time to replace the heater core ... an extra 230 bux for a genuine part plus the fitting ..... Link to comment Share on other sites More sharing options...
mars_volta Posted October 31, 2016 Share Posted October 31, 2016 I took time off from work to drop my car Fri morn at 7:30. They haven't even started on it yet! Link to comment Share on other sites More sharing options...
allwheeldrift Posted October 31, 2016 Share Posted October 31, 2016 thankyou for the link Scooby2.5 i followed the instructions... now i just need a pic with a giant red circle showing me what to pull out, now that i have this whole thing apart. The pannel to the right of my shifter is off and the glove box is hanging down Link to comment Share on other sites More sharing options...
Scooby2.5 Posted November 1, 2016 Share Posted November 1, 2016 thankyou for the link Scooby2.5 i followed the instructions... now i just need a pic with a giant red circle showing me what to pull out, now that i have this whole thing apart. The pannel to the right of my shifter is off and the glove box is hanging down If you are working on the clicking actuators just turn your key on, and work your heater controls. Mode switch, etc and see which one is making the clicking sound. You will see them try to work after the heater is shut off if they are bad. Or you will see them continue to try to work/adjust after selecting a different mode etc. Link to comment Share on other sites More sharing options...
Scooby2.5 Posted November 1, 2016 Share Posted November 1, 2016 Link to comment Share on other sites More sharing options...
allwheeldrift Posted November 1, 2016 Share Posted November 1, 2016 so this is behind the panel thats to the left of my glove box and to the right of my shifter? Link to comment Share on other sites More sharing options...
ssbtech Posted November 1, 2016 Share Posted November 1, 2016 Yes. I think the actuator that fails is the mode door actuator, which is at the top and a pain to get to. I found my mini ratchet set to be very helpful in getting the screws on the bracket. http://www.eastwood.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/p/7/p70289.jpg Link to comment Share on other sites More sharing options...
Scooby2.5 Posted November 2, 2016 Share Posted November 2, 2016 I took the bottom bracket screw out, then took the screws that screw the actuator to that bracket out. Then bent it up a bit and took actuator out. Put new actuator in and pushed bracket back down. Put the screws through the bracket into the actuator and then screwed the bracket screw in. I did not take the very top screw out of the bracket into the car. Too hard to get to and then have to put back in. Link to comment Share on other sites More sharing options...
allwheeldrift Posted November 3, 2016 Share Posted November 3, 2016 quite a bit of valuable information in this thread i need to get a mini ratchet set in the meantime my HU is out as are most of the panels since i have a custom double din made by HCA and not regular HU its a bit of pain to plug it all back up, and sort out the actuator just to remove it in another 2 weeks and reinstall it again when my replacement dash finally comes in from subaru(been waiting 3 months) im going to try the toggle key method and see if i can find it that way as soon as we get some better weather otherwise ill have to wait a couple weeks untill my dash is replaced before attempting this Without my headunit ive been hearing it clicking away while im driving. and its a million times more audible then when its packed away behind the dash and without radio, its driving me crazy thanks for all the help guys Link to comment Share on other sites More sharing options...
ssbtech Posted November 5, 2016 Share Posted November 5, 2016 Oh, almost forgot. Getting to the screws on the bracket is a pain, and so is getting the screws back in the hole with the bracket in place. Place a couple layers of scotch tape over the back side of the bracket to retain the screw as you hold the thing in place. Link to comment Share on other sites More sharing options...
allwheeldrift Posted November 6, 2016 Share Posted November 6, 2016 managed to get this done the mini ratchet set was perfect for removing the actuator it was a pain in the ass espically to reach the last screw in the bracket its also a good idea to mark the actuator arm position in relation to how its positioned in the black box i didnt, and ended up having to open the box up 5 times to finally get it all to line up correctly once back in... ill say this... it takes quite a bit of finesse to get everything back into place all at the same time the actuator arm has 2 other arms that must go back on their respective tracks, while lining up the black box with the bracket and the car all in all it took me about 3 hours, which included the trip to the store to buy the mini ratchet set thanks for all the help -awd Link to comment Share on other sites More sharing options...
ssbtech Posted November 6, 2016 Share Posted November 6, 2016 Glad it worked out! I've lost count of how many times the mini ratchet set has helped me out with various projects. Link to comment Share on other sites More sharing options...
ehsnils Posted November 6, 2016 Share Posted November 6, 2016 Takata mulls bankruptcy for U.S. unit, filing will take time Japan's Takata Corp is considering a bankruptcy filing for its U.S. unit as the air bag maker looks for a sponsor to help pay for liabilities related to its faulty inflators, a person briefed on the matter told Reuters. Takata has been working to choose a financial backer for its turnaround as it faces huge costs related to the global recall of millions of potentially faulty inflators. A company-appointed steering committee has retained investment bank Lazard Ltd as an adviser for the process. http://www.reuters.com/article/us-autos-takata-idUSKBN12Y2XK Link to comment Share on other sites More sharing options...
Scooby2.5 Posted November 7, 2016 Share Posted November 7, 2016 managed to get this done the mini ratchet set was perfect for removing the actuator it was a pain in the ass espically to reach the last screw in the bracket its also a good idea to mark the actuator arm position in relation to how its positioned in the black box i didnt, and ended up having to open the box up 5 times to finally get it all to line up correctly once back in... ill say this... it takes quite a bit of finesse to get everything back into place all at the same time the actuator arm has 2 other arms that must go back on their respective tracks, while lining up the black box with the bracket and the car all in all it took me about 3 hours, which included the trip to the store to buy the mini ratchet set thanks for all the help -awd Yea if you take the motors apart to clean them def mark the gears and position of the arm, thats what I did. I didn't take the metal brackets out of the car just bottom screws and screws into actuator and left the top metal bracket screw alone. That way I didn't have to fight it getting it back in. Link to comment Share on other sites More sharing options...
gimpydingo Posted November 8, 2016 Share Posted November 8, 2016 Finally got my airbags taken care of on the 07 LGT. Now to deal with the wiper motor on the 13 3.6. Link to comment Share on other sites More sharing options...
Claw Posted November 10, 2016 Share Posted November 10, 2016 Took my car in yesterday; dealership scratched the dash and yoinked out the wire for the antenna, severing it. They're ordering me a new dash, but they claimed the antenna was broken already - it was not, but it was partially frayed from a flawed Jazzy install back in 2005. Link to comment Share on other sites More sharing options...
ssbtech Posted November 10, 2016 Share Posted November 10, 2016 How bad were the dash scratches? As for the antenna wire, which part? Radio end or car end? Even if it was a little frayed, they shouldn't have pulled on it hard enough to break it. Link to comment Share on other sites More sharing options...
EvilTender Posted November 11, 2016 Share Posted November 11, 2016 Checked with my dealer today to see if parts were in for the pass. airbag for my 2007 Tribeca. No luck yet and no word on when they expect them. At least my 2016 Legacy has not been recalled for anything yet.... Link to comment Share on other sites More sharing options...
MJ in PA Posted December 9, 2016 Share Posted December 9, 2016 I just received a notice saying that sufficient parts are in so I should schedule the replacement. I believe the notice stated that the work takes about an hour and a half. I assume that means they won't be disassembling the whole dash. Link to comment Share on other sites More sharing options...
WaRpEd Posted December 12, 2016 Share Posted December 12, 2016 Taking my 06 lgt sedan in today, was told two hours and the guy thought they needed to remove the dash...time to take a bunch of pictures and videos of everything working and hope they don't break anything. Link to comment Share on other sites More sharing options...
PeterJMC Posted December 12, 2016 Share Posted December 12, 2016 Taking my 06 lgt sedan in today, was told two hours and the guy thought they needed to remove the dash...time to take a bunch of pictures and videos of everything working and hope they don't break anything. +1 do this. Be sure to take pics of the edges where panels meet. When they completed the work I noticed a nick on the edge of the dashboard. I couldn't remember if it existed before they started work on it. Not a big deal either way, it was really small. But if I knew for a fact that they caused it, they'd be fixing/replacing it Link to comment Share on other sites More sharing options...
mars_volta Posted December 12, 2016 Share Posted December 12, 2016 I just received a notice saying that sufficient parts are in so I should schedule the replacement. I believe the notice stated that the work takes about an hour and a half. I assume that means they won't be disassembling the whole dash. Pretty sure they have to disassemble the whole thing. It took them 4 days to do mine. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now