im2c0ol

Which one? Send me the links. Did some staining...

If you ordered these then you've wasted your self some $$. It doesn't work. You should follow my thread I had the entire headlight separate so I know... https://www.subispeed.com/2015-subaru-wrx/subispeed-drl-harness-for-boomerang-c-light-2015-wrx-base-premium#.VRrrAPnF-VM

Well these are nice warm 2950k color temp with the LED diffuser doesn't hurt the eyes when looking at it. I had one in my small bathroom and they looks good, although I did upgrade all my lights in the house to 5000k daylight CFL, but then takes a while to warm up. This LED from Lowe instant bright perfect color and warm for the eyes, great for bedroom.

Where do i find cheaper, bright 4" LED Recessed light? Lowes seem to has the brightest 665lm but $55/ea, Home Depot $47 but only 550lm, Costco and Sams only has the retrofit kit only 500lm.

The C-Led only comes on with the low beam on if in auto mode. But it'll comes on if you put in park/city light mode.

I have KTP-445U on my SUV now, haven't got a chance to crank it up yet cuz the rear speaker still stock, It's loud, it's probably a good option for the premium guys.

Done, I requested for Sunroof & Stone/Bug Deflector as well.

I'm def in for a set, I had this one all my previous cars. But $200 for these just doesn't do it.

As this thread growing, best for OP to note all the options on first post with part # make it easier for everyone without digging all through those pages.

Something to add to the list! 1. Lighting a. DRL Disable Mod; i. http://legacygt.com/forums/showpost.php?p=4899811&postcount=1 b. 2.5i Limited Retrofit; RX350 AFS + STI-R & Denso Slim AL Potted, Osram CBI i. http://www.hidplanet.com/forums/showthread.php?62054-2015-Subaru-Legacy-RX350-STI-R-XB35-5500k-Denso-Retrofit c. 2.5i HID Kit; H11: MORIMOTO ELITE HID SYSTEM i. http://www.theretrofitsource.com/hid-systems/morimoto-elite-hid-system-h11.html ii. Install guide; http://legacygt.com/forums/showthread.php/step-step-guide-hid-upgrade-w-pics-234897.html d. 3.6R Bulbs upgrade; i. D4S CBI 5500khttp://www.theretrofitsource.com/components/bulbs/d4s-osram-xenarc-66440-cbi-49205.html#.VNECDWh4ob0 ii. D4S XB35 http://www.theretrofitsource.com/components/bulbs/morimoto-xb35-xengreen-d4s-bulbs.html#.VNECWWh4ob0 e. Foot-well Illumination Kit from 09-13 Forester i. 2. Suspension a. 19mm STI & 20mm XV CrossTrek i. http://legacygt.com/forums/showthread.php/19mm-rear-sway-bar-install-231670.html 1. http://legacygt.com/forums/showpost.php?p=5020853&postcount=55 2. http://legacygt.com/forums/showpost.php?p=5020853&postcount=56 3. http://legacygt.com/forums/showpost.php?p=5020853&postcount=57 3. Exterior a. DIY: Front Lip; garage door sealer i. http://legacygt.com/forums/showpost.php?p=5046147&postcount=188 ii. http://legacygt.com/forums/showpost.php?p=5046148&postcount=189

Retrofit by im2c0ol, on Flickr

Now need to figure out what to do with the stock 16mm laying around! Maybe hang it on the ceiling and make a swing out of it. lol

You guys should wait for the 20mm!

If it pulls to one side, your alignment is out bring it back to the dealer to fix it. Rear sway bar only stiffen the rear end, improves handleling doesnt link to the alignment at all. Sent from my HTC One_M8 using Tapatalk

The more I drive the more I enjoy the ride. Wind was 10mph, road is wet this morning I was pushing it to work at 80mph, through a few curves at 80mph. It's rocking solid like a sport car now, rear seating is def much more comfortable as well.

Both wheels has to be either even loaded or not loaded off the ground. If one has more load than the other then you can't position the sway bar in place.

They only has 5000k on it so if the goes then it's time for upgrade. It also depends how much it cost, what will it improves and if it's necessary.

[attach]199574[/attach]

Perfect fit, you can probably park the car one side on the curve for easy access to it. This is a must mod on top of your list! I can notice the different just rolling out of my drive way. Ride with much more confident now, it feels like a different car. The metal part are being reused, you'll only need three parts to complete this upgrade which is two bushing, one rear sway bar.

Subaru XV Crosstrek Rear Sway Bar Kit - 20mm Install. Model(s): XV Crosstrek Model Year(s): 2013 2014 Part Number(s): 20451VA000-20464VA000 x2 - See more at: http://subaruonlineparts.com/subaru-crosstrek-rear-sway-20mm-p-3920.html#sthash.vg1R0xIX.dpuf

Canon EOS 5D Mark II & 24-70mm f/2.8L EF L-Series

Washed my car, had no chance to give it a nice wax yet. It get dirty quick, I also did some leather seat cleaning and conditioning. IMG_2566 by im2c0ol, on Flickr IMG_2563 by im2c0ol, on Flickr IMG_2587 by im2c0ol, on Flickr IMG_2594 by im2c0ol, on Flickr

DRL connect as requested: IMG_2608 by im2c0ol, on Flickr IMG_2614 by im2c0ol, on Flickr This is how I leave mine disconnect, put a blue painter tape on to keep it from falling out, this way you don't get crap built up in the connectors. IMG_2620 by im2c0ol, on Flickr measurement came out on both green/blue wire with put in gears. IMG_2617 by im2c0ol, on Flickr there's no load detected when in park, sorta strange that both green/blue is hot when in gear, not sure which wire the resistor box cut the load down.

Right... The video is very misleading where they didn't state that until you read the feed back comments and people still give it 5/5 rating which is wack!