im2c0ol

What's my choice for 2.5i dual exhaust? I wonder if 3.6r direct fit on 2.5i.

Just ordered!

Awesome, while disabling the DRL, the C LED doesn't seem to be notice enough to give you the confident that you're being notice on the street to avoid people merging into you etc and causes accident. Hopefully someone find the fog light install manual to see how we can jump the wire to have the fog light on as a substitute for DRL, and probably replace the entire fog light assembly with Morimoto XB LED Fog. Reminder VLEDS doing 20% labor sale this weekend, don't miss it!

I also found a 2" cap on the bottom of the headlight give access to the C LED board made by Koito, you can unplug it if you don't like the C LED, but I might look deeper into it to see if it even possible to pull the board along with its LED to swap the led with a brighter one.

I guess the next step is the fog light mod, I saw the 5th gen, I just need to know which wire is the fog light to tab it to an ignition line trace with my multimeter instead of forget to turn it off leaving the car and come back with a dead battery.

Nope, everything else is functional except the DRL high beam.

I was successfully disable mine today! First time Subaru owner, and I hate the 3800k high beam DRL running on low voltage halogen color ruining the beauty new C LED DRL however it's not really bright and visible when the sun still out. Tools: your hand time: 3minutes It's located on the driver side right under the headlight. Remove the HL main plug to gain access Carefully press and remove the plug. You're done! 12/28/2017 Update This mod is a great combination of the 7440 signal to 7443 switchback LED I did back in Jan 2016 but never get time to write a DIY. Here's the result What I used in the youtube video; https://www.amazon.com/Socket-Brake-Signal-Light-Harness/dp/B00DRK5M0I/ref=sr_1_7?ie=UTF8&qid=1471723509&sr=8-7&keywords=7443+adaptor 7443 Switchback LED recommend to get them from TRS, Diode Dynamic or VLEDS. I used ACME 7443 $25 ones in the video was brighter than the VLEDS I had. You'll need to use a knife to trim the 7443 socket to fit in the 7440 socket, wasn't that hard. Just tap one the amber wire to the signal, with a resistor. DIY Thread: http://legacygt.com/forums/showthread.php/7440-7443-switchback-led-vs-v3-triton-switchbacks-drl-255402.html?t=255402&highlight=7443

A 1.25" front and 1" rear is perfect. I hate how the front looks higher than the rear. Sent from my HTC One_M8 using Tapatalk 2

That is sexy!!! Its lowered? Sent from my HTC One_M8 using Tapatalk 2

Get rid of those dealer decals and would be clean if you debadge it aswell. Sent from my HTC One_M8 using Tapatalk 2

I guess they are making it back from the sales interests? Sent from my HTC One_M8 using Tapatalk 2

god, those are expensive! I probably going to find some cheaper similar ones.

I wonder it it's that's possible for the new 2015 just hit the dealer? I might loose some disadvantage in that vs a 2014 been out a while and struggling to get good sales.

I'm buying the 2015 Legacy in June/July when it's available, so am I too late?

Is this the same as below? The best wheels I see so far, might get it for my new Legacy... what are they? spec and offset?