im2c0ol

Add link to first post, now you can replace the DRL high bulb with LED that can operate as DRL and High beam, brighter! the well known Cree LED

Until those 3.6r get their upgrade , I'd be interest how we can get those stock 3.6r fitted on the 2.5i as I only want stock dual exhaust, any additional noise from the exhaust. I'll get my ear exploded from the wife.

I live in cali 11yrs, just moved away almost 4yrs. I'm so happy here without having to deal with the hawks over there staring at you 24/7 waiting for you to make a tiny mistakes.

RA

IMG_2242 by im2c0ol, on Flickr

Pull the bulbs seem to be a good idea, it helps reduce heat to the headlight. As I pull the bulbs I see the bulb holder and got a hint of yellow from the bulb heat.

It seem to be the LED driver, the LED placement is far away from the board. So it still need to seperate headlight to get to the LED.

Spot the twin the other day @ Costco

I tried to removed the grill, but you have to drop the bumper to remove the front grill. So I just paint it on the car.

IMG_0809 by im2c0ol, on Flickr IMG_0815 by im2c0ol, on Flickr

3.6r guys can you guys take picture of the bottom of the exhaust system where the rear end connector are, and pipe size measurement. Sent from my HTC One_M8 using Tapatalk

Repainted all the rooms, 41yrs old house was renovated in 08. But they paint the entire house flat white, with the kids I have to repaint it to easier maintain. my fav color out of all my green room, that I can use for photo/videography stuff. hall way bath new microwave installed.

Don't think these would, but good to know that i'll be running a lot LEDs in the house as well. Thanks, also had a new microwave installed, still need to upgrade the dishwasher and oven to match.

Why RFI? Sent from my HTC One_M8 using Tapatalk

Upgraded two outdoor flood light with some night LED ones. Installed Island Hood

There's 6 screws on the top, two on the bottom. Held with 4 claws 2 on top and two on the bottom. You'll need to remove drop the bumper in order to remove it according to the manual, but might be for the bottom part. As for the top part I think with a small hand, short screw driver you could possibly remove the grill without dropping the bumper. Cheers...

Free? Or it's that rip off price I saw on another post yesterday?

It resist rock chips better then regular paint, it's like a rubberize coat, if you put a good 4-5 coats it'll hold up very well. I need to dip mine as well.

The last pic I see the resistor box with black wire point up just under that main plug to the headlight. Trace it from the resistor box under it with three black wires. You'll need to unplug that main plug to get better access, it should be tucked on the bottom from it around 4-8"away from main plug.

I'll start... taken with Canon 5D MKII & 24-70mm F2.8L Please DO NOT steal my picture without permission!

If you guys going to get LED for F/R Signal 7440 fits snugged right in the WY21W from VLEDS, as for the reverse I ordered 921 LED, until it comes I shall tell. But it should fit no problem....

Going to need the electrical wiring diagrams...