im2c0ol

Current Stats; Tigger73: 18 Grnlantern1: 17 Laz: 8 TTG: 6 Twisted freedom: 4 Mehilovich: 4 Im2c0ol: 4 Nybz: 3 Kaopealii: 2 PNWHardcore: 2 Sos123: 2 2_From_NH: 2 Bozyczko: 1 Cyc66: 1 CCC555: 1 Andrew_l_s: 1 MaheshBabuKolla: 1 Citadel: 1 Skye_scoob: 1 Subybru: 1 Next Challenge: Picture your legacy with at-least one wheel off the car.

I had retrofitted 6 times over the last 8yrs into HID stuff. I highly trying to avoid open the headlight more than once, so if I open it, it gotta be a good retrofit project. Make sure you do at-least weeks of researches before attempt to open a headlight. Even some pro retrofiter do have issue with moisture sometimes it's a pain and costly.

I use the cardboard box and the heatgun to pull it apart, did end up break the signal reflector. I was able to glue it back without any issue. If you have an oven that can fit 31" long headlight for 10 mins at 225c that should be easier to taken apart. But I did add extra butyl when putting it back, otherwise if you end up with fogging you might screw up your headlight. I wouldn't open it just to paint it and take a big risk, if I were to open it I'll def do a real retrofit while you're at it.

Ekk headlight surgery.

You won tigger73!

Sorry, i dont involes in the challence much so lost track.

Current Stats; Grnlantern1: 17 Tigger73: 17 Laz: 8 TTG: 6 Twisted freedom: 4 Mehilovich: 4 Im2c0ol: 3 Nybz: 3 Kaopealii: 2 PNWHardcore: 2 Sos123: 2 2_From_NH: 2 Bozyczko: 1 Cyc66: 1 CCC555: 1 Andrew_l_s: 1 MaheshBabuKolla: 1 Citadel: 1 Skye_scoob: 1 Subybru: 1 Next Challenge: Picture your legacy with a statue.

http://images.tapatalk-cdn.com/15/11/05/318cc24dcad0ad5aa529b39399c8bc30.jpg Closet i can get.

just bought the 16' Legacy! ha!

Current Stats; Grnlantern1: 17 Tigger73: 16 Laz: 7 TTG: 6 Twisted freedom: 4 Mehilovich: 4 Nybz: 3 Kaopealii: 2 PNWHardcore: 2 Sos123: 2 Im2c0ol: 2 2_From_NH: 2 Bozyczko: 1 Cyc66: 1 CCC555: 1 Andrew_l_s: 1 MaheshBabuKolla: 1 Citadel: 1 Skye_scoob: 1 Subybru: 1 Next Challenge: Your legacy in front of some fruit tree with fruits.

Actually its posted by subybru, he didnt even know i quote his post. Can't claim credit. I pm'ed him.

Or this

This could of be an easy one, for a few firestation a block away, but don't have the legacy.

these firetrucks would be nice! Easy one, but haven't drive me legacy for 2.5wks....

first oil change @ 4.8k, didn't loose a drop of oil. second oil change @ 5.8k didn't loose a drop either. however first 8k mpg was horrible.

Hopefully subaru bring some 7seater SUV/Mini Van. Need to replace my 8seater crappy FWD honda pilot.

The only covered bridge we have here in our state is pedestrians convered bride to another building in downtown. Im out...

This issue is not only subaru, I been a honda guy for 10yrs. They're like that for all hondas and even my scion tc. I does bother the heck out of me as well to those who cares. But mostly the other 70% doesn't bother, ride it stock till it dies. Usually rear wheel always looks more camber than the front, by adding the spacer even throwing the camber way off, you'll definitely will need camber kit as-well. I just hope someone make .5"-75" drop spring for the front only that way we can balance the car height for those who doesn't like drop too much. It seems like the spacer is a good idea, I might go that route. But going to wait for some member to try it out first.

Projector bolt in. Retrofit by [/url], on Flickr running the Morimoto HD relay harness Retrofit by , on Flickr Wiring Retrofit by , on Flickr Retrofit by , on Flickr Good shot of blue eye matching subaru emblem Retrofit by , on Flickr 100' wall shot Retrofit by , on Flickr side wall shot Retrofit by , on Flickr 40-50' wall shot Retrofit by , on Flickr closer look Retrofit by , on Flickr Retrofit by , on Flickr Retrofit by , on Flickr I'll do a 6th retrofit on the 2016 Legacy probably mid of next year, will be gathering some LED to do some custom build in headlight DRL and probably throw in an engel eye too could be use as DRL.

wall shot of left retro vs right with pnp hid 15 Legacy 2.5i Retrofit by [/url], on Flickr stock on left vs retro with color mod on right. Retro by , on Flickr making the wiring for bixenon when I turn high beam, basically I get dual high beam. Retrofit by , on Flickr Retrofit by , on Flickr how I paint the shield Retrofit by , on Flickr shield modding for mounting and sharpness tuning Retrofit by , on Flickr dremel the housing Retrofit by , on Flickr Retrofit by , on Flickr mounting the projector Retrofit by , on Flickr 2nd projector prep ready to go Retrofit by , on Flickr

More pix of the C-LED board, led board on bottom with aluminum heat sink 15 Legacy 2.5i Retrofit by [/url], on Flickr Led on top with the aluminum heat sink 15 Legacy 2.5i Retrofit by , on Flickr Time to get it seal up 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr

15 Legacy 2.5i Retrofit by [/url], on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr Check aiming before reseal the headlight 15 Legacy 2.5i Retrofit by , on Flickr RX350+CBI left vs Stock Halogen with H11 XB35 5500k HID on right. 15 Legacy 2.5i Retrofit by , on Flickr

the two un-swap-able Koito LED C-Led 15 Legacy 2.5i Retrofit by [/url], on Flickr stock halogen are identical size, front end lens are identical. RX350 non afs low beam only will fit in without much mods. 15 Legacy 2.5i Retrofit by , on Flickr Dremel the bottom part make room for solenoid 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr test fit RX350 AFS front end 15 Legacy 2.5i Retrofit by , on Flickr Blue Shield Color mod + STI-R Clear Lens. 15 Legacy 2.5i Retrofit by , on Flickr

Simply with a card board box and a $21 bucks Wagner 0503008 HT1000 1,200-watt Heat Gun and 15 minutes later. 15 Legacy 2.5i Retrofit by [/url], on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr

The headlight is 31" long so no way it'll fit into any both of my ovens. OEM Black Butyl will need to be bake at 225c for minutes. Best to use a card box with heat gun. - Denso Slim Potted - Osram CBI 5500k - XB35 5500k - TRS HD Relay Harness - RX350 AFS +STI-R What projectors would fit? going easiest to hardest RX350 non-afs, EVOX-R/E55, Bosch E46, RX-350 AFS, G37, Maxima, MD2S 3". Starting off 15 Legacy 2.5i Retrofit by [/url], on Flickr RX350 AFS, RX330 AFS, MH1, MD2S 15 Legacy 2.5i Retrofit by , on Flickr 15 Legacy 2.5i Retrofit by , on Flickr