Underdog

Spotted getting dropped off via flatbed at Transcendent Tuning. Someone is either having a very good day, or a very bad day. Picked up a new FMIC, charge pipes, and intake… for my Accord.

Pm incoming Yep, I’ll pm you about it and the cooling mod.

Bump

Bump. Still a bunch of parts listed in the OP.

Cool. I may just pick up a set to play around with. Maybe I’ll start a separate thread so we can post what we find.

Does anyone recall if the top feed TGV motor/sensors are compatible with the 05-06 ECUs? I know the connectors are different but don't recall anyone ever using intact topfeed TGVs on an originally side-fed car. Edit: I have compared the wiring diagrams and know the pinout to the E2 harness is different - I'm wondering if the sensor range and motor power requirements from the ECU are compatible.

Added a pair of new outer tie rods from the STI rack

Bump

Bump

Sold to you!

Sorry, the wiring harness shipped out this afternoon. I don’t want to delete the photos so I’m maintaining a list of what has sold in the OP.

Prices reduced

Added LGT 5MT driveshaft and front swaybar. Shipping not available for either item.

SOLD Brand new sets of King XPG main & rod bearings for the EJ25. These are the .001” oversized bearings, which I recommend having on hand when building an engine in case your particular parts stack up too tight. Brand new in package. $80 shipped for the pair. PayPal or Venmo accepted. Let me know if you have any questions.

Sorry - exhaust gaskets sold a few hours ago. Thanks for the interest though!

Shifter/e brake/armrest leather sold

All items must go! Misc hoses/brackets/gaskets as low as $2 each and happy to combine items at a discount. $10 each for items like the intake manifold, fuel rails/injectors, throttle body, A/C compressor, leather shifter/brake/armrest boots - again willing to heavily discount bundled items. Everything sold in as-is condition but last known to be in good working order unless otherwise stated. Buyer responsible for shipping or pickup. PayPal/venmo accepted. Happy to answer questions or take additional pictures as needed. Let me know if there’s something else you are looking for that’s not pictured - I just might have it. More items will be added as the pile dwindles and I have room to move! STILL AVAILABLE Fuel Filler Saucer/Plate/Gasket Variety of Engine Gaskets SAI Gaskets Engine Ground Strap Trunk Tray Engine Cover 4x Group.N Exhaust Hangers (15mm) Valve Spring Coolant Temp Sensor Pitch Stop Mount Front Bumper Clips Upper Intake Manifold Side Feed Fuel Rails Fuel Pressure Regulator Assembly Variety of engine bay hoses and brackets (see pics) Turbo Inlet 5MT Driveshaft Front Swaybar Endlinks & Bushings (used) Front Endlinks (new) Front Camber Bolts (new) OEM lugs (15x) Catback Spring Bolts (bolts only) Front and Rear Strut Dust Caps Engine Drain Plug Gaskets AT Drain Plug Gasket GT Caliper Side & Piston Seal Kit Rear Wheel Speed Sensors from Spec.B ITEMS SOLD/PENDING SALE Shift/Ebrake/Armrest Leather Exhaust Gaskets Fuel Injectors A/C Compressor Wiper Arm Turbo Coolant Reservoir Throttle Body Engine Wiring Harness Breather Balance Pipe & Hoses AVO TB Hose STI Y-pipe ’15 STI Outer Tie Rods (should fit LGT) EJ25 Con Rods MAF Sensor & Pigtail Bypass Valve Factory Scissor Jack

Happy holidays! Treat yourself to some cool STi merch.

Bump

Not strictly necessary. Many people can get the toe in spec without trimming the inner tie rods. The mod maximizes the available adjustment.

SOLD Purchased sometime back in 2011/2012, they are like new, maybe worn 2-3 times ever. You will receive them in the original packaging with STI label. I’ve attached pictures with the relevant dimensions. The jacket was made by Goldwin for the 2011 STI 24hr NBR Challenge Team. It is waterproof and even the pockets use sealed zippers. There is a spacious mesh pouch and hidden pocket on the interior of the jacket. There is a hood with elastic drawstrings that rolls up and tucks into the collar. The jacket is a US medium - I am 6’ tall and 160lbs and it fits me perfectly. I generally wear medium shirts for a more fitted feel, or large for roomier items, and this slots right in between, leaving room for layers underneath. The driving gloves have a cool grippy texture on the palm side, and are very comfortable. Being driving gloves they feel a little short and snug compared to regular cold weather gloves, but this avoids any extra material bunching up between your hand and the shifter or steering wheel. They are sized XL, but I’m not sure how that translate from Japanese to American sizing - pics attached to show length and width across the palm on my hand I am looking for $125 shipped for the jacket and for the gloves I can do $75 shipped. Buy both and I can do $180 shipped. Paypal/Venmo accepted. G&S at buyers expense. Items can ship out within 24hrs via UPS or USPS.

Both items brand new in package. Venmo/PayPal accepted, G&S optional at buyers expense. *SOLD* GDT Cylinder 4 cooling kit with metal fitting - $80 shipped *SOLD* Whiteine KCA414 camber bolts no longer for sale

SOLD

Thanks! I’d be switching from the same tire and vintage, so that is helpful to have a direct comparison.

Thanks guys. I’m going to replace the tires and battery, and put in some fresh fluids, then list it at a price and wait for the right buyer. I’m starting a new job in January so at least I will have more opportunity to drive it. I’m thinking Michelin PS4 A/S to replace my old summers, but haven’t stayed up on the latest tire offerings. Any other suggestions? I don’t need the best snow/ice performance (relatively speaking of course, for an A/S) but year-round dry/wet would be great.