magnusonsubie Posted June 20, 2015 Share Posted June 20, 2015 I hope you went for a photoshoot this afternoon 2005 Vader Wagon Material Tests on Ringland Failure Piston I should have held off and purchased a wagon instead of the spec.B Link to comment Share on other sites More sharing options...
Bigshoes Posted June 25, 2015 Share Posted June 25, 2015 slacker Link to comment Share on other sites More sharing options...
GipsySpec.B Posted June 25, 2015 Share Posted June 25, 2015 Link to comment Share on other sites More sharing options...
Zero1 Posted October 25, 2015 Author Share Posted October 25, 2015 (edited) It's been a while since I've updated the build as it's been at a bit of a stand-still since I got my car back from the body shop in June. Seemed the more I looked and inspected it the more things I found that weren't installed correctly or broken. Needless to say, I have a long list of things I have to fix, modify, rewire, and replace. I've gone through a lot of the list so far but life gets busy and funds become sparse. I've got a lot of parts sitting around and a few to come before I can get it re-tuned and the body stuff re-addressed. I'm shooting for spring but who knows, no sense in hurrying when I've waited two years and only had it driving for about a month combined in that time. It will be an awesome feeling if I ever get her running again and can enjoy driving a car! Here are some pics to tide you over until then Edited January 9, 2018 by Zero1 Link to comment Share on other sites More sharing options...
Zero1 Posted October 25, 2015 Author Share Posted October 25, 2015 Also updated the build thread with a few more things to add as the time comes... Link to comment Share on other sites More sharing options...
LatentWagen Posted October 25, 2015 Share Posted October 25, 2015 It will be an awesome feeling when I get her running again and can enjoy driving a car! Fixed! LW's spec. B / YT / IG Link to comment Share on other sites More sharing options...
Zero1 Posted November 28, 2015 Author Share Posted November 28, 2015 (edited) Just finished up getting all my new gauges sorted out. If you're interested in doing something similar feel free to check out my write up here: http://legacygt.com/forums/showthread.php/defi-advance-and-zeitronix-gauge-install-247579.html?p=5284923#post5284923 Edited November 28, 2015 by Zero1 Link to comment Share on other sites More sharing options...
GipsySpec.B Posted November 28, 2015 Share Posted November 28, 2015 Looks awesome! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Andy_Mac Posted November 28, 2015 Share Posted November 28, 2015 You ever get any pics of how much of the bumper / fog surrounds needed to be hacked out to get the intercooler to fit in there? 2000 Legacy B4 RSK - SOLD 2006 Legacy BP5 GT Spec B wagon - Garage Thread 2011 VW T5 van 2.0L of turbo diesel awesomeness Link to comment Share on other sites More sharing options...
Zero1 Posted November 29, 2015 Author Share Posted November 29, 2015 You ever get any pics of how much of the bumper / fog surrounds needed to be hacked out to get the intercooler to fit in there? I apologize, it's currently in storage right now so I will try to get some pics posted up in the next few days when I have a chance to go over and take a peak at it. Link to comment Share on other sites More sharing options...
Andy_Mac Posted November 29, 2015 Share Posted November 29, 2015 No rush at all man. Been tossing up between the avo and racerx front mount. Most people seem to have alot more trouble getting the avo one to fit but you seem to have done a killer of a job of it. 2000 Legacy B4 RSK - SOLD 2006 Legacy BP5 GT Spec B wagon - Garage Thread 2011 VW T5 van 2.0L of turbo diesel awesomeness Link to comment Share on other sites More sharing options...
Hannya Posted November 30, 2015 Share Posted November 30, 2015 Ah Ben. How I hope to have connections like you my friend. Only thing I got going for me is the Prova SI Dial. Link to comment Share on other sites More sharing options...
I Donated Too luchadorjose Posted November 30, 2015 I Donated Too Share Posted November 30, 2015 Sell it and get a Prius Link to comment Share on other sites More sharing options...
Zero1 Posted January 18, 2016 Author Share Posted January 18, 2016 No rush at all man. Been tossing up between the avo and racerx front mount. Most people seem to have alot more trouble getting the avo one to fit but you seem to have done a killer of a job of it. Finally got those pics for ya Andy! I had to trim a fair amount more on the bumper under the fog shrouds as well as a fair amount of trimming on the fog shrouds because I ditched the rubber FMIC hoses from AVO and have custom aluminum 2.5" piping instead. Hopefully the pics help you make a call on the amount of trimming Link to comment Share on other sites More sharing options...
DANgerGT Posted April 12, 2016 Share Posted April 12, 2016 Is this car still alive? Link to comment Share on other sites More sharing options...
Zero1 Posted January 24, 2017 Author Share Posted January 24, 2017 Long overdue for some updates... The last year has been a lot of waiting for parts, money, and more parts. Finally getting to a spot where I can start putting everything back together and if only SOA would hurry up with their dash warranty I could have a lot more done Upgrades include some suspension bits, brakes, lights, under hood goodies, new twin scroll exhaust, and a new interior. Here's a few teaser pics including a shot of the everlasting jack-stand racer, enjoy Link to comment Share on other sites More sharing options...
Zero1 Posted January 24, 2017 Author Share Posted January 24, 2017 More pics and a photo shoot my friend and I did in my garage. Enjoy Link to comment Share on other sites More sharing options...
Hepy117 Posted January 24, 2017 Share Posted January 24, 2017 More pics and a photo shoot my friend and I did in my garage. Enjoy At first i thought you were doing a low front mount turbo, then I realized it was sitting on the stool. Haha Link to comment Share on other sites More sharing options...
Books Posted January 24, 2017 Share Posted January 24, 2017 Absolutely amazing build... Link to comment Share on other sites More sharing options...
Zero1 Posted January 25, 2017 Author Share Posted January 25, 2017 At first i thought you were doing a low front mount turbo, then I realized it was sitting on the stool. Haha Haha yep! No where near the room for a turbo up front Absolutely amazing build... Thank you!! Link to comment Share on other sites More sharing options...
bigBADbenny Posted January 31, 2017 Share Posted January 31, 2017 Did the rear lateral "pirro" arms come with washers? If not make sure you get the right ones or the ball joints will flog out Link to comment Share on other sites More sharing options...
Silinc3r Posted February 4, 2017 Share Posted February 4, 2017 I still can't tell if I want those STi wheels. If only them came gold I think I would have done it a long time ago. Looking at your car and trying really hard to not buy things....doesn't work very well. Silinc3r's 05 SWP GT/Spec B Link to comment Share on other sites More sharing options...
WRX USA Posted February 4, 2017 Share Posted February 4, 2017 I still can't tell if I want those STi wheels. If only them came gold I think I would have done it a long time ago. Looking at your car and trying really hard to not buy things....doesn't work very well. All it takes is powdercoat... Link to comment Share on other sites More sharing options...
Silinc3r Posted February 4, 2017 Share Posted February 4, 2017 All it takes is powdercoat... Yea, trust me I've thought about it but don't know if I could do that to new wheels Silinc3r's 05 SWP GT/Spec B Link to comment Share on other sites More sharing options...
Zero1 Posted February 4, 2017 Author Share Posted February 4, 2017 I still can't tell if I want those STi wheels. If only them came gold I think I would have done it a long time ago. Looking at your car and trying really hard to not buy things....doesn't work very well. They definitely look better in silver. A different style of wheel in gold would be neat though, like one of my old sets of wheels... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now