Kaos22B Posted July 13, 2005 Share Posted July 13, 2005 Anyone know where to get it/howmuch etc.... http://www.k2k2.jp/img/earo/BP_earo/050123-01b.jpg Link to comment Share on other sites More sharing options...
PGT Posted July 13, 2005 Share Posted July 13, 2005 K2K2 (IIRC) - Paul @ AVO is your best bet. Also, try a search.....lots of info already out there on the board. Link to comment Share on other sites More sharing options...
apexjapan Posted July 13, 2005 Share Posted July 13, 2005 I can get both, though the hood scoop is *much* easier in terms of shipping. The bumper is the problem - unpainted it's around $980usd (!) and then shipping is rather incendiary from Japan to North America. Cheers, Paul Hansen http://www.avoturboworld.com http://www.sevenphotos.com http://www.scoobymag.com Link to comment Share on other sites More sharing options...
rallispec Posted July 13, 2005 Share Posted July 13, 2005 just realize that 1)it's expensive as hell to ship over a bumper from japan, and 2)it won't fit the USDM legacy without major modifications to the front bumper beam. moral of the story.. unless your clinically insane (see this thread: http://legacygt.com/forums/showthread.php?t=14648) -- just wait until some US aftermarket body kits start showing up. as for the hood scoop, that on the other hand should not be a problem. Like PGT said, check with Paul at AVO. (or just look at his post above mine ) Link to comment Share on other sites More sharing options...
gfxdave99 Posted July 13, 2005 Share Posted July 13, 2005 Just cut the bumper into pieces and mold it back together :lol: If everything seems under control, you're just not going fast enough. - Mario Andretti Link to comment Share on other sites More sharing options...
ralphyralph5 Posted July 13, 2005 Share Posted July 13, 2005 Both items are HOTT!!! I don't know if i'm missing something here, but LGT hood scoops are molded into the hood. How would we get this hood scoop on with out cutting out the stock hood scoop? Link to comment Share on other sites More sharing options...
apexjapan Posted July 13, 2005 Share Posted July 13, 2005 Basically, it bolts *over* the standard hood scoop. The "scoop" part is a completely molded funnel that feeds into the standard scoop opening. Most of the advantages come from the larger initial hole area. It is available (unpainted) in both FRP and Carbon Fiber from K2Gear. http://www.avoturboworld.com/avoshop/index.php?cPath=1_58_3_118 Cheers, Paul Hansen http://www.avoturboworld.com http://www.sevenphotos.com http://www.scoobymag.com Link to comment Share on other sites More sharing options...
thatericguy Posted July 13, 2005 Share Posted July 13, 2005 rallispec: while i understand that you may think that what i did as "clinically insane", but understand that many high (OEM) quality body kits that give you the desired look you want are around 1k-1.5k USD installed/painted (price I paid for the set up I made). It is unfortunate that anyone that wants to follow my foot steps would have to pay double or more than what I paid for simply because I got a really good deal for OEM parts. I'd be impressed if anyone could get 2 OEM quality bumpers for 800 USD shipped nowadays...I can't think of any nice kits made stateside that are of good quality for any subarus. Link to comment Share on other sites More sharing options...
rallispec Posted July 13, 2005 Share Posted July 13, 2005 rallispec: while i understand that you may think that what i did as "clinically insane", but understand that many high (OEM) quality body kits that give you the desired look you want are around 1k-1.5k USD installed/painted (price I paid for the set up I made). It is unfortunate that anyone that wants to follow my foot steps would have to pay double or more than what I paid for simply because I got a really good deal for OEM parts. I'd be impressed if anyone could get 2 OEM quality bumpers for 800 USD shipped nowadays...I can't think of any nice kits made stateside that are of good quality for any subarus. heh.. sorry if you took that wrong way... didnt mean any disrespect... I think the end result turned out amazing --- just that i'd never dream of cutting away at my $25k car with a hacksaw Link to comment Share on other sites More sharing options...
tah Posted July 13, 2005 Share Posted July 13, 2005 Why does this kit look like the new BMW M5 front? Link to comment Share on other sites More sharing options...
PGT Posted July 13, 2005 Share Posted July 13, 2005 Why does this kit look like the new BMW M5 front? Because that's what they used for their design inspiration. Link to comment Share on other sites More sharing options...
thatericguy Posted July 13, 2005 Share Posted July 13, 2005 haha no offense taken...i understand people are shocked about doing something like that, its just the nature of things when theres no precedent yet. heh.. sorry if you took that wrong way... didnt mean any disrespect... I think the end result turned out amazing --- just that i'd never dream of cutting away at my $25k car with a hacksaw Link to comment Share on other sites More sharing options...
Precise Posted July 13, 2005 Share Posted July 13, 2005 if you ship more than one bumper (like 3-5) is freight significantly decreased? Link to comment Share on other sites More sharing options...
RoundBoy Posted July 14, 2005 Share Posted July 14, 2005 I would buy that today... ... but not for $1000 + shipping to the USA. Link to comment Share on other sites More sharing options...
Kaos22B Posted July 14, 2005 Author Share Posted July 14, 2005 I would buy that today... ... but not for $1000 + shipping to the USA. my thoughts exactly... Link to comment Share on other sites More sharing options...
IwannaSportSedan Posted July 15, 2005 Share Posted July 15, 2005 I think the bumper is 79000¥ which roughly translates to about 704$. Basically knock two zeros off to convert the currency. Current exchange rate is 112¥ per US Dollar. It ends up over-estimating by a few percent. But as you say, it'll cost that much more to ship it, plus the bumper beams, trim and attachment bits, Doh. BTW, check out the "Post your dream mods" thread. page 3. here. I posted some new pics there. let me know if you want me to re-post the image links here. Lots of new bits, especially the K2 Reiz kit for the sedan, (the M5 look bumper) as well as a couple new aero parts, and other performance bits. Good stuff. Link to comment Share on other sites More sharing options...
Precise Posted July 16, 2005 Share Posted July 16, 2005 oh man i really want this bumper set now, i wonder how many ppl would be actually willing to get this if its about $300 for freight Link to comment Share on other sites More sharing options...
CobaltForge Posted February 4, 2007 Share Posted February 4, 2007 Bringing this one back from the dead. I was checking out Japanparts.com and came across this: http://www.japanparts.com/images/ImageFromDB.php?base=0&no=1955 186-001-006-F BP/BL 35-40 days JP ¥55,100.00 US $454.85 Reiz FULL LIP FRP For Reiz Front Bumper. Unpainted. http://www.japanparts.com/images/dummy.gifhttp://www.japanparts.com/images/ImageFromDB.php?base=0&no=1956 186-001-006-S BP/BL 35-40 days JP ¥84,000.00 US $693.41 Reiz FULL LIP SWCF For Reiz Front Bumper. Unpainted. Silver Wet Carbon. http://www.japanparts.com/images/dummy.gifhttp://www.japanparts.com/images/ImageFromDB.php?base=0&no=1957 186-001-006-W BP/BL 35-40 days JP ¥74,000.00 US $610.86 Reiz FULL LIP WCF For Reiz Front Bumper. Unpainted. Wet Cardon. http://www.japanparts.com/images/dummy.gifhttp://www.japanparts.com/images/ImageFromDB.php?base=0&no=1958 186-001-007-F BP/BL 35-40 days JP ¥43,800.00 US $361.57 Reiz SHORT LIP FRP For Reiz Front Bumper. Unpainted. http://www.japanparts.com/images/dummy.gifhttp://www.japanparts.com/images/ImageFromDB.php?base=0&no=1959 186-001-007-S BP/BL 35-40 days JP ¥65,200.00 US $538.22 Reiz SHORT LIP SWCF For Reiz Front Bumper. Unpainted. Silver Wet Carbon. http://www.japanparts.com/images/dummy.gifhttp://www.japanparts.com/images/ImageFromDB.php?base=0&no=1960 186-001-007-W BP/BL 35-40 days JP ¥56,400.00 US $465.58 Reiz SHORT LIP WCF For Reiz Front Bumper. Unpainted. Wet Carbon. http://www.japanparts.com/images/dummy.gifhttp://www.japanparts.com/images/ImageFromDB.php?base=0&no=1962 186-001-009-F BP/BL 35-40 days JP ¥21,400.00 US $176.66 Reiz EYELINE TYPE2 FRP Pair. Unpainted. http://www.japanparts.com/images/dummy.gif Would I just have to basically do the JDM Front bumper conversion to make this fit? Link to comment Share on other sites More sharing options...
BDII Posted February 4, 2007 Share Posted February 4, 2007 Am I the only one who thinks that $450 is ridiculous for lip spolier? Need forum help? Private Message legGTLT Link to comment Share on other sites More sharing options...
Hanger Posted February 4, 2007 Share Posted February 4, 2007 I've just talked to a wrx owner last night, apparently he got full INGS replica 4 piece body kits for $400 that bolts on perfectly. And yet the options for us are all more than i want to spend... ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
Magic Posted February 4, 2007 Share Posted February 4, 2007 Has any bod contacte US body kit manufatures, to see if we can get something done, even if its a knock off Click Here everyday:redface: Link to comment Share on other sites More sharing options...
CobaltForge Posted February 5, 2007 Share Posted February 5, 2007 ^^^ I know no one. Thought I would be totally down for a replica of this kit. I'm looking for the whole bumper. This thing is sweet! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.