uncle humjaba Posted May 6, 2013 Share Posted May 6, 2013 Koni sport shocks with h&r sport springs. I think I'm going to go with the smaller whiteline adjustable rear sway bar. I'm happy with the amount of roll right now (i.e. not much, as you can see in the picture). I just want it balanced more towards oversteer. No point in getting both bars. http://i.imgur.com/pvYrYNQ.jpg Link to comment Share on other sites More sharing options...
CrowNaza86 Posted May 6, 2013 Share Posted May 6, 2013 Great pic! Link to comment Share on other sites More sharing options...
SBT Posted May 6, 2013 Author Share Posted May 6, 2013 @ Cone_Killer - you going to hit me back on my PMs about picking up your brake bits? - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
SpecBamf41 Posted May 6, 2013 Share Posted May 6, 2013 (edited) Just letter people know there are meets every saturday morning at car and coffee in mt pleasant Sent from my S3 Edited May 11, 2013 by SpecBamf41 BNR18g on 93oct Link to comment Share on other sites More sharing options...
CrowNaza86 Posted May 7, 2013 Share Posted May 7, 2013 Yep, I am usually there for a bit. Good times Link to comment Share on other sites More sharing options...
SpecBamf41 Posted May 7, 2013 Share Posted May 7, 2013 Just went there to the iron clad alley locarion where they temporally have it I guess to check it out. Nice parking lot. Sent from my S3 BNR18g on 93oct Link to comment Share on other sites More sharing options...
CrowNaza86 Posted May 7, 2013 Share Posted May 7, 2013 Haven't been to the new spot yet, they just had their first one there this past weekend. It use to be at Mozzos. Link to comment Share on other sites More sharing options...
Cone_Killer Posted May 7, 2013 Share Posted May 7, 2013 @ Cone_Killer - you going to hit me back on my PMs about picking up your brake bits? Sorry, car was sideswipped a few days ago. Dealing with all of that right now Link to comment Share on other sites More sharing options...
CrowNaza86 Posted May 7, 2013 Share Posted May 7, 2013 Sorry, car was sideswipped a few days ago. Dealing with all of that right now Sorry to hear that bro. Hopefully they stopped and have insurance. How bad is it? Link to comment Share on other sites More sharing options...
SBT Posted May 7, 2013 Author Share Posted May 7, 2013 Sorry, car was sideswipped a few days ago. Dealing with all of that right now So sorry to hear that mang. Were you in it - hope not, or that you're okay if you were. LMK if you need anything. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Cone_Killer Posted May 7, 2013 Share Posted May 7, 2013 It happened at Harris Teeter by Hobby Lobby, while I was shopping. Its pretty bad, knee high gouge down the passenger side and broken mirror LED lens. Link to comment Share on other sites More sharing options...
CrowNaza86 Posted May 7, 2013 Share Posted May 7, 2013 Bastards Link to comment Share on other sites More sharing options...
SBT Posted May 7, 2013 Author Share Posted May 7, 2013 Bastiges - and they didn't leave a note I'm sure. HT's Security camera should have caught it though. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
uncle humjaba Posted May 9, 2013 Share Posted May 9, 2013 Attempted uppipe and downpipe install yesterday. Leaks Off to the exhaust shop... Clutch install? No problem. Hack apart my struts to install koni's? Timing belt? Head gasket? Cake. But try to fit aftermarket exhaust and I'm hopeless. Link to comment Share on other sites More sharing options...
SBT Posted May 9, 2013 Author Share Posted May 9, 2013 I find it a lot easier with AM bits, to just loosely bolt them together and then working from the front toward the rear, start to tighten everything up in sequence, then futz with the Mid > Y and Y > Mufflers to get everything straight. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
uncle humjaba Posted May 9, 2013 Share Posted May 9, 2013 I followed the sequence here: http://legacygt.com/forums/showthread.php/up-pipe-installation-instructions-171933.html and torque specs here: http://legacygt.com/forums/showthread.php/exhaust-informational-thread-39943.html Though 26 ft-lbs seems really low. Link to comment Share on other sites More sharing options...
uncle humjaba Posted May 10, 2013 Share Posted May 10, 2013 FHkdljufhfskjg Exhaust shop said he doesn't really do turbo cars because it takes too long. Anyone in the clemson area want to help a brother out? x.x On top of this, yesterday morning I got a P0123 CEL and the car went into limp mode. Again this morning. I cleared the code and it seemed to act better after the car warmed up... But I pulled the intercooler off and took a look anyway. Everything looked alright - I didn't unplug the wire or anything. I wish allpro subaru wasn't 2 freaking hours away... Link to comment Share on other sites More sharing options...
SBT Posted May 10, 2013 Author Share Posted May 10, 2013 Noel Adams is in Greenville. Not sure how far that is from you. But he's got some build experience. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
uncle humjaba Posted May 10, 2013 Share Posted May 10, 2013 Greenville isn't that far. Fairway subaru says an uppipe install is about $150.. not sure I want to bite that bullet just yet. Anybody have experience with them? Link to comment Share on other sites More sharing options...
uncle humjaba Posted May 11, 2013 Share Posted May 11, 2013 Just reinstalled everything.... Aaaand it's no better. I think I'm going to try and put my stock DP back on this afternoon and see if that makes a difference. http://legacygt.com/forums/showthread.php/exhaust-leak-after-up-dp-install-207393.html Link to comment Share on other sites More sharing options...
uncle humjaba Posted May 16, 2013 Share Posted May 16, 2013 Just reinstalled everything.... Aaaand it's no better. I think I'm going to try and put my stock DP back on this afternoon and see if that makes a difference. http://legacygt.com/forums/showthread.php/exhaust-leak-after-up-dp-install-207393.html The never-ending stage 2 install! Tore everything back out again today, installed a different up pipe. Three trips to the parts store for gaskets and studs later, everything is back in... Except the gasket they gave me for the downpipe-to-catback doesn't fit. Turns out that the uppipe Allpro Subaru sold me had a HOLE in it somewhere behind a heat shield. Got a friend's STI uppipe for free and now there's no more leak there, at least. Meh. Link to comment Share on other sites More sharing options...
CrowNaza86 Posted May 16, 2013 Share Posted May 16, 2013 Progress right? Link to comment Share on other sites More sharing options...
SBT Posted May 16, 2013 Author Share Posted May 16, 2013 Who is Allpro Subaru? Congrats on getting your UP issue squared away. That's typically a pita when you're using a stock pipe, because of the accordion-type flex joint, which does corrode and start to leak, behind the heat shield. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
uncle humjaba Posted May 17, 2013 Share Posted May 17, 2013 Subaru dealer in the Atlanta area, seems to be pretty well known around there. The guys seem really knowledgeable (I've called them a few times to ask questions). Just a bummer that I had to waste so much of my time chasing down a leak like this. I'm glad I didn't pay a shop to do it... Link to comment Share on other sites More sharing options...
Chameleon Posted May 17, 2013 Share Posted May 17, 2013 Who is Allpro Subaru? Subaru dealer in the Atlanta area They are not actually a dealer but a Subaru Performance/Specialty Shop ... like you said they are VERY knowledgeable. They are a group of awesome guys up there and I personally have a lot of respect for them. Sorry you had to go through all that mess and glad you did get things sorted out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now