The Korean Posted May 14, 2018 Share Posted May 14, 2018 Andy still replies to emails and builds these... Ordered my RHD one last summer. His email is info@gaugetek.com Link to comment Share on other sites More sharing options...
Blackbeard Posted May 15, 2018 Share Posted May 15, 2018 I emailed him a few months back about it, he never replied. I'll try again I guess. Link to comment Share on other sites More sharing options...
Daniels Posted May 16, 2018 Share Posted May 16, 2018 email is dead Link to comment Share on other sites More sharing options...
Scooby2.5 Posted June 4, 2018 Share Posted June 4, 2018 The CEL would have nothing to do with the gauge Google the codes Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted June 4, 2018 I Donated Share Posted June 4, 2018 Did you put the fuse back in where the add-a-fuse was plugged in? You'll get a P0600 if the fuse in that slot is bad. Link to comment Share on other sites More sharing options...
odepaj Posted August 29, 2018 Share Posted August 29, 2018 For anyone who needs it, here is the manual for the VBG1: https://www.dropbox.com/s/pl9617xzw1xls45/VBG1%20Manual.pdf?dl=0 I spent a few days hunting it down and figured it would be of good use to share here Link to comment Share on other sites More sharing options...
JF1GG29 Posted October 24, 2018 Share Posted October 24, 2018 Does anyone know if I can convert the AFR readout to oil pressure? Link to comment Share on other sites More sharing options...
Somac Posted November 19, 2018 Share Posted November 19, 2018 What's the last time anyone's gotten a response from lossol? Trying to figure out if it's worth it to try to contact him to buy a gauge. Is he officially done making them at this point? Link to comment Share on other sites More sharing options...
shutterbc Posted November 20, 2018 Share Posted November 20, 2018 What's the last time anyone's gotten a response from lossol? Trying to figure out if it's worth it to try to contact him to buy a gauge. Is he officially done making them at this point?I think it has been a while now. I haven't tried lately but the site is down. Anyone have a copy of the design files? It would have been cool to share the design to allow others to build their own. Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
Scooby2.5 Posted November 20, 2018 Share Posted November 20, 2018 I havnet heard back from him for years, but here is another solution...... https://www.p3cars.com/subaru/ Link to comment Share on other sites More sharing options...
Somac Posted November 20, 2018 Share Posted November 20, 2018 Woof. At that price, I think I'll stick to trying to find a different spot to mount an AEM wideband. That one looks a bit more OBD2 centric anyways. Link to comment Share on other sites More sharing options...
Schrei Wolf Posted November 21, 2018 Share Posted November 21, 2018 (edited) I really wanted one of these but ended up going with an Innovate PSB-1 in a AVO Guage Pod Edit: Tempted to put it in one of these. http://ortizcustompods.com/uploads/3/4/1/7/34174225/s477132602315564541_p226_i1_w1066.jpeg Edited November 21, 2018 by Schrei Wolf Link to comment Share on other sites More sharing options...
Somac Posted November 21, 2018 Share Posted November 21, 2018 So the Multi-Guage one plugs into the ODB2 Port, where as the one that is just a boost gauge does not plug into but its basically a $200 boost guage For me, the only reason I want it is for an AFR gauge. I already have boost, oil pressure, and oil temp, as well as an AccessPort and a Bluetooth OBD2 reader with Torque Pro, so the other features are kind of worthless to me. That's why I liked the VBG1. AFR is the only gauge Defi doesn't make, so it's the only one that'll stick out and not match the rest, so I want it to be as discreet as possible. Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted November 23, 2018 I Donated Share Posted November 23, 2018 Makes sense, just wish it was analog like the VBG1....the VBG1 isn't analog though Link to comment Share on other sites More sharing options...
spec.B Dream Posted April 30, 2019 Share Posted April 30, 2019 Well, my VBG1 seems to have bit the dust. It doesn't seem to be receiving sufficient power, no screen/lights but will beep every once in a while. Anyone have any luck repairing theirs? Link to comment Share on other sites More sharing options...
Rusty9 Posted July 26, 2021 Share Posted July 26, 2021 Yeah, mine doesn't really light up anymore, the VFDs are probably shot. Worked great for all these years. I'll have to take it out and apart to see if replacement parts are available, or if it might need a bit of solder reflow. I don't think Lossol has signed into the forums in 6-7 years at this point. The p3 gauge I have in my new STI is pretty ok. I sent an email to them a while back asking about making one for the older legacy and they said buy the largest one they have and trim it to fit. Link to comment Share on other sites More sharing options...
Daniels Posted July 27, 2021 Share Posted July 27, 2021 One of my favorite mods when I had my wagon, hands down. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now