Marvick08GT Posted October 8, 2021 Share Posted October 8, 2021 (edited) Looking to sell some of the parts I had on my 08 LGTB. All parts have about 1,500 miles (1126) , header has 8k ***SOLD*** Blouch 1.5xtr 10cm (bought directly from Blouch) $1360 (paid $1800) ***SOLD*** Cobb Catted downpipe with Thermal Zero blanket $580 (O2 port drilled through nameplate) Perrin ELH Coated header (new version no slip joints) $800 ($1500 new) ***SOLD*** Grimmspeed coated and wrapped up-pipe. $160 ($300 new) 2020 STI heatshield modified for the blouch $30 (looks new) ***SOLD*** Killer B inlet Pipe BNIB $265 (didn't work with the EFR) All stock location turbo (2.4", 2.5") cars except the EFR LMFAO Edited December 2, 2021 by Marvick08GT Lowered Prices Link to comment Share on other sites More sharing options...
shralp Posted October 8, 2021 Share Posted October 8, 2021 What kind of power did you make with your 1.5 xtr 10/cm? Thinking about this config for my track car, currently running a custom 16G Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 8, 2021 Author Share Posted October 8, 2021 Made 478/466 and was de-tuned to 445/450. Great setup ran great with my GS tmic. Started pushing coolant under WOT (engine had 190k lol) Spoke with Agile, new engine etc (so why not more power?) Turbo Fuel system etc. Can't wait for the results of my current build! Link to comment Share on other sites More sharing options...
xt2005bonbon Posted October 8, 2021 Share Posted October 8, 2021 Which turbo are you going to use next? And what was the flow rate of your injectors with the DOM? Also, do you recall the peak load in g/rev you were able to hit with this turbo? Finally, would you know how it compares to a VF52 (JMP) in terms of turbo lag? Link to comment Share on other sites More sharing options...
shralp Posted October 8, 2021 Share Posted October 8, 2021 Which turbo are you going to use next? And what was the flow rate of your injectors with the DOM? Also, do you recall the peak load in g/rev you were able to hit with this turbo? Finally, would you know how it compares to a VF52 (JMP) in terms of turbo lag? This bonbon guy, he's asking all the questions I want answers to! Wacky! Link to comment Share on other sites More sharing options...
xt2005bonbon Posted October 8, 2021 Share Posted October 8, 2021 Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 8, 2021 Author Share Posted October 8, 2021 Build info on my ridiculous build thread. ID1300xd2 Aem 340 lph Injectors were not the issue, the AEM couldn't keep up. Had to taper boost after 6k. Can't compare to the VF52 spool wise, but there is more power everywhere (it feels like there is) Everything else is classified.. Link to comment Share on other sites More sharing options...
xt2005bonbon Posted October 9, 2021 Share Posted October 9, 2021 Regarding load, I was just curious what kind of load I would hit on wastegate boost only (in case I installed it with my stock injectors until I can install better ones). Link to comment Share on other sites More sharing options...
samuel082799 Posted October 9, 2021 Share Posted October 9, 2021 Is the turbo the 3 inch I let version of the stock inlet? Sent from my SM-G770U1 using Tapatalk Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 9, 2021 Author Share Posted October 9, 2021 Stock inlet size, lots of interest don't sleep on it! Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 9, 2021 Author Share Posted October 9, 2021 Regarding load, I was just curious what kind of load I would hit on wastegate boost only (in case I installed it with my stock injectors until I can install better ones). You need injectors, just wastegate pressure is 15 or more psi (check the Blouch website) I will have a set of ID1300XD2 for sale soon(1300 miles.. Tuner misdiagnosed), they are getting refurbished by ID so I can sell them and sleep at night (even though they weren't the issue..) lol Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 9, 2021 Author Share Posted October 9, 2021 Blouch 1.5XTR SOLD to samuelwilliams082799 Link to comment Share on other sites More sharing options...
xt2005bonbon Posted October 11, 2021 Share Posted October 11, 2021 You need injectors, just wastegate pressure is 15 or more psi (check the Blouch website) I will have a set of ID1300XD2 for sale soon(1300 miles.. Tuner misdiagnosed), they are getting refurbished by ID so I can sell them and sleep at night (even though they weren't the issue..) lol wow. 15 psi?? Dang that's a lot on wastegate. I'll check their site. Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 13, 2021 Author Share Posted October 13, 2021 To the top! Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 15, 2021 Author Share Posted October 15, 2021 (edited) Cobb Downpipe sold to Tehnation! To the top, prices lowered. Pic of studs for uppipe Edited December 2, 2021 by Marvick08GT Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 18, 2021 Author Share Posted October 18, 2021 Killer B inlet SOLD to Boxkita! To the top! Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 22, 2021 Author Share Posted October 22, 2021 Pms replied! To the top Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 29, 2021 Author Share Posted October 29, 2021 Lowered prices, to the top! Link to comment Share on other sites More sharing options...
Marvick08GT Posted October 29, 2021 Author Share Posted October 29, 2021 Lowered prices, to the top! Link to comment Share on other sites More sharing options...
Marvick08GT Posted November 6, 2021 Author Share Posted November 6, 2021 To the top again! Adjusted prices Link to comment Share on other sites More sharing options...
xt2005bonbon Posted November 8, 2021 Share Posted November 8, 2021 OP, I am quite interested in your up pipe. I have a cracked Invidia which I need to remove. Two questions: Shipping is included? (84780) Any additional hardware coming with it such as the bolts which originally came with it? Link to comment Share on other sites More sharing options...
Marvick08GT Posted November 9, 2021 Author Share Posted November 9, 2021 Not with the price of shipping these days unfortunately.. PM me an offer, we'll go from there! Link to comment Share on other sites More sharing options...
Marvick08GT Posted December 2, 2021 Author Share Posted December 2, 2021 (edited) Bump it up! Pic of uppipe studs Edited December 2, 2021 by Marvick08GT Link to comment Share on other sites More sharing options...
Marvick08GT Posted December 2, 2021 Author Share Posted December 2, 2021 Up pipe sold to xt2005bonbon Link to comment Share on other sites More sharing options...
xt2005bonbon Posted December 2, 2021 Share Posted December 2, 2021 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now