IcEWoLF Posted April 11, 2018 Share Posted April 11, 2018 (edited) I'm convinced to do the same now. Might plasti-dip it instead, but should look the same. The nice thing about plasti dipping is you will be able to get nice coverage and no cutting involved, just make sure you put enough coats and you should be golden, make sure the area you work in is dust free and it should come out nice. Edited April 11, 2018 by IcEWoLF Link to comment Share on other sites More sharing options...
Grnlantern1 Posted April 12, 2018 Share Posted April 12, 2018 Swapped out my High Beams with some PIAA Solar Yellow's.. Just something different not a fan of headlight mods.. I dont use High Beams much because I have upgraded fogs..[ATTACH]263975[/ATTACH][ATTACH]263977[/ATTACH][ATTACH]263976[/ATTACH][ATTACH]263974[/ATTACH] Sent from my SM-G965U using TapatalkNot suee why the other pics didnt come through.. Try again.. Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
chowser51 Posted April 12, 2018 Share Posted April 12, 2018 I'm convinced to do the same now. Might plasti-dip it instead, but should look the same. I dipped mine awhile ago. Holds up fine. Just make sure to do a few light coats to make it even and easy to remove later if needed. Link to comment Share on other sites More sharing options...
DarkCloud23 Posted April 12, 2018 Share Posted April 12, 2018 Soon to be mod? I just ordered some gramlights and i am super excited. Sent from my VS995 using Tapatalk BC Racing. Blox Racing. Whiteline. AVO Turbo. RalliTek. Gramlights Michelin. Optima. HKC-Speed. Nameless. AFE. K&N. WeatherTech. Morimoto. Solar Gard. PPF. 9H. Link to comment Share on other sites More sharing options...
IcEWoLF Posted April 12, 2018 Share Posted April 12, 2018 I’m thinking about replacing the exhausts in the back and getting something nice in there, are there any options atm that would fit? Trying to figure things out. Basically I want to get rid of the fake tips and getting something that would fit properly and still look good. Link to comment Share on other sites More sharing options...
Pleiades 3.6R Posted April 12, 2018 Share Posted April 12, 2018 I’m thinking about replacing the exhausts in the back and getting something nice in there, are there any options atm that would fit? Trying to figure things out. Basically I want to get rid of the fake tips and getting something that would fit properly and still look good. Nothing on the market I'm aware of and I've looked pretty extensively. I contacted Nameless Performance and they said they're working on a prototype but didn't respond to my request for an ETA Link to comment Share on other sites More sharing options...
Grnlantern1 Posted April 12, 2018 Share Posted April 12, 2018 I’m thinking about replacing the exhausts in the back and getting something nice in there, are there any options atm that would fit? Trying to figure things out. Basically I want to get rid of the fake tips and getting something that would fit properly and still look good.2.5 or 3.6r.. If you have a 3.6r Any Legacy Gt Exhaust will fit with slight mod of the mid pipe.. I had the Invidia Q300 on my 3.6.. Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 12, 2018 Share Posted April 12, 2018 Please post more info on those knuckle washers. I wouldn't mind installing these if I didn't have to drill the knuckles You don’t have to drill the top knuckle hole,just use a 12mm bolt and lock nut, As for tapping bottom hole it’ll be fine since your not enlarging the hole. Have u watch the video link I posted from BWC fabrication bracket,it’s the same thing I’m trying to do. Link to comment Share on other sites More sharing options...
mclarenf3 Posted April 12, 2018 Share Posted April 12, 2018 I dipped mine awhile ago. Holds up fine. Just make sure to do a few light coats to make it even and easy to remove later if needed. I always love your car. Same colour as mine, so it's awesome that I can see how it'll turn out. I'll likely do the rear bumper at the same time. But will leave the trunk lid and roof stock. I used plasti-dip on my JDM grill, and liked the results. Ended up re-doing it with (Rustoleum's) Flexi-dip. They are very similar, but I found flexi-dip to be a little more liquid as it goes on and I liked the results better. Flexi-dip looks a bit more rubbery once applied. Link to comment Share on other sites More sharing options...
IcEWoLF Posted April 12, 2018 Share Posted April 12, 2018 2.5 or 3.6r.. If you have a 3.6r Any Legacy Gt Exhaust will fit with slight mod of the mid pipe.. I had the Invidia Q300 on my 3.6.. [ATTACH]264002[/ATTACH] Sent from my SM-G965U using Tapatalk Any issues with noise such as droning? Link to comment Share on other sites More sharing options...
Grnlantern1 Posted April 13, 2018 Share Posted April 13, 2018 Any issues with noise such as droning?A little but not much because mid pipe has a small resonator.. its 3" Stainless Piping Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 13, 2018 Share Posted April 13, 2018 A little but not much because mid pipe has a small resonator.. its 3" Stainless Piping Sent from my SM-G965U using Tapatalk So what u did with your invidia?are u planning on giving it away?Lol Link to comment Share on other sites More sharing options...
Grnlantern1 Posted April 13, 2018 Share Posted April 13, 2018 So what u did with your invidia?are u planning on giving it away?LolIts Not worth selling because I cut the Tips to try and get it to work with my Rear Skirt and Mid Pipe has quite a bit of Scrape Damage because of the Speed Bumps in my Neighborhood.. Its a piece of scrap metal now. Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 14, 2018 Share Posted April 14, 2018 (edited) Just finished installing ATS calipers everything went well except I didn’t get to install the stoptech SS lines, I couldn’t get the nut to budged from oem line from the main line,it was on there pretty tight,so I guess I’ll give a try some other time,,anyways took it for a test and I can really feel the difference in braking from oem. Also I did tap the bottom knuckle hole,but the top hole I used a 12mm bolt and flanged nut,I totally forgot to take a pic of how I press the 12mm flanged nut on the caliper..took me about 6hrs since I had to paint and wait for it to dry,but kinda wish I waited longer,paint wasn’t dry enough,,but you can’t see the smudge since it’s in the back side of it. Edited April 14, 2018 by PATS4LIFE Link to comment Share on other sites More sharing options...
gathermewool Posted April 14, 2018 Share Posted April 14, 2018 Which pads are you using? '15 FB25 Magnatec 0W-20 + FU filter (70,517 miles) RSB, Fr. Strut Bar, Tint, STI BBS, LED er'where Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 14, 2018 Share Posted April 14, 2018 Which pads are you using? It’s power stop ceramic pads for 2005+ Cadillac But I will change it up with STi pads when it’s halfway worn.. Link to comment Share on other sites More sharing options...
StPeteLegacy Posted April 15, 2018 Share Posted April 15, 2018 http://legacygt.com/forums/picture.php?albumid=2672&pictureid=12178 Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 15, 2018 Share Posted April 15, 2018 (edited) I went ahead and test fitted the stock 17” wheel to see if it’ll clear the brembos,the only way it will clear is have atleast 3mm spacers and to not have the weights on the spoke side of the wheel. Edited April 15, 2018 by PATS4LIFE Link to comment Share on other sites More sharing options...
gathermewool Posted April 15, 2018 Share Posted April 15, 2018 I went ahead and test fitted the stock 17” wheel to see if it’ll clear the brembos,the only way it will clear is have atleast 3mm spacers and to not have the weights on the spoke side of the wheel. In other words, they DON’T fit? '15 FB25 Magnatec 0W-20 + FU filter (70,517 miles) RSB, Fr. Strut Bar, Tint, STI BBS, LED er'where Link to comment Share on other sites More sharing options...
Matt_75 Posted April 16, 2018 Share Posted April 16, 2018 Added an AL Priority "Multipurpose parking system" to my baby. Link to comment Share on other sites More sharing options...
mclarenf3 Posted April 16, 2018 Share Posted April 16, 2018 Haha! That's one of the few driving aids I'm glad Subaru doesn't have! But good job on the installation, looks clean. Link to comment Share on other sites More sharing options...
gathermewool Posted April 16, 2018 Share Posted April 16, 2018 Haha! That's one of the few driving aids I'm glad Subaru doesn't have! But good job on the installation, looks clean. Looks like it’s a radar and laser jammer; the name is just a front, right OP? '15 FB25 Magnatec 0W-20 + FU filter (70,517 miles) RSB, Fr. Strut Bar, Tint, STI BBS, LED er'where Link to comment Share on other sites More sharing options...
mclarenf3 Posted April 16, 2018 Share Posted April 16, 2018 Looks like it’s a radar and laser jammer; the name is just a front, right OP? Oh you sneaky buggers. I even went to their website and it looks like it's a parking aid. Link to comment Share on other sites More sharing options...
Pleiades 3.6R Posted April 16, 2018 Share Posted April 16, 2018 Looks like it’s a radar and laser jammer; the name is just a front, right OP? Laser jammer, not radar. Link to comment Share on other sites More sharing options...
Matt_75 Posted April 17, 2018 Share Posted April 17, 2018 Haha! That's one of the few driving aids I'm glad Subaru doesn't have! But good job on the installation, looks clean. Thanks. Looks like it’s a radar and laser jammer; the name is just a front, right OP? Laser jammer, not radar. Yes gathermewool. ^^^^ What he said. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now