TeriyakiBBS Posted April 8, 2014 Share Posted April 8, 2014 I understand that its hard to fit some aggressive fitment under the fenders of LGTs. Lets post up some fitment specs of people that have pushed the limits. I know there is a "stance" thread which I love but this is different. I am considering going a little more aggressive with my wheel and tire setup. I have 18x8 +35 BBS CK 235/40/18 Conti DWs I'm looking at 18x9 +45ish with a 245 or 255 http://i131.photobucket.com/albums/p318/FLCLgibson1968/CA84C4B1-5680-4E41-8A4E-D43DFAAF22A8_zps6x1yxuwz.jpg My old car I had Work Emotion XD9 18x10 +18 with 225/35/18 http://i131.photobucket.com/albums/p318/FLCLgibson1968/0c1e5634.jpg I later switch to Enkei RPF1 18x9.5 +15 with 265/35/18 http://i131.photobucket.com/albums/p318/FLCLgibson1968/b3ebbd8b.jpg Link to comment Share on other sites More sharing options...
bnguyenbb6 Posted April 9, 2014 Share Posted April 9, 2014 http://farm6.staticflickr.com/5532/10045904223_f389ab9d1b_z.jpg 255/35 on 18x9.5 I down sized to a 235/40 but I'm considering stepping back up to a 255/265. Link to comment Share on other sites More sharing options...
TeriyakiBBS Posted April 9, 2014 Author Share Posted April 9, 2014 BNGUYENBB6: do you have a side profile? how much camber and fender rolling did you do? offset of the wheels? Link to comment Share on other sites More sharing options...
bnguyenbb6 Posted April 9, 2014 Share Posted April 9, 2014 (edited) I unfortunately do not have a side profile pic. I don't have rear arms so the camber was sitting where it wanted after lowering(about -1.8*). All my fenders are rolled flat with a slight pull. I had to roll/bang the area of the fender directly back of the rear door to stop the tires from rubbing hard. Edit: Wheels are +35 Edited April 9, 2014 by bnguyenbb6 Link to comment Share on other sites More sharing options...
Arielgt93 Posted April 9, 2014 Share Posted April 9, 2014 245/40 on 17x10 +20 offset I wanted to go with 255 but money was real tight. http://i1271.photobucket.com/albums/jj621/arielgt93/3DBDBA95-7A9E-4BDB-AA7A-0B26D8A98F98.jpg Link to comment Share on other sites More sharing options...
don7 Posted April 9, 2014 Share Posted April 9, 2014 245/40 on 17x10 +20 offset I wanted to go with 255 but money was real tight. http://i1271.photobucket.com/albums/jj621/arielgt93/3DBDBA95-7A9E-4BDB-AA7A-0B26D8A98F98.jpg Could i get some info on those flares, they looks delicious. Link to comment Share on other sites More sharing options...
thisisthenewsic Posted April 9, 2014 Share Posted April 9, 2014 I ran 18x9.5 +38 rpf1 with 255/35/18. Rolled/pulled fenders Link to comment Share on other sites More sharing options...
LeggoMyLeggy Posted April 9, 2014 Share Posted April 9, 2014 http://farm6.staticflickr.com/5532/10045904223_f389ab9d1b_z.jpg 255/35 on 18x9.5 I down sized to a 235/40 but I'm considering stepping back up to a 255/265. Looks sweet, what exhaust are you running if you don't mind me asking? Link to comment Share on other sites More sharing options...
Nightmaresmk Posted April 9, 2014 Share Posted April 9, 2014 I'm running 255's but i'm also an outback. 17x8et35 with 255/50R17's Link to comment Share on other sites More sharing options...
bnguyenbb6 Posted April 9, 2014 Share Posted April 9, 2014 Leggomyleggy- Its a custom VTSI Fab Exhaust with Vibrant resonators Link to comment Share on other sites More sharing options...
gordata Posted April 12, 2014 Share Posted April 12, 2014 Let's get more members in here. I have seen a few with meaty setup over in the aftermarket wheel thread. Sent from my Nexus 5 using Tapatalk Link to comment Share on other sites More sharing options...
loogie Posted April 12, 2014 Share Posted April 12, 2014 Sub. this thread haha Link to comment Share on other sites More sharing options...
SpecB82 Posted April 13, 2014 Share Posted April 13, 2014 http://img.tapatalk.com/d/14/04/13/a6azu3u6.jpg 17x8.25 ET35 with 235/45/17 Fenders are rolled and pulled. Max factory camber. Lowered on KW V2's. Rubs on rear when hitting good bumps. Really wanted to do 245/40's, but knew it would be even tougher to fit :-( Sent from my SCH-I535 using Tapatalk Link to comment Share on other sites More sharing options...
Dead Mr. Posted April 14, 2014 Share Posted April 14, 2014 http://i186.photobucket.com/albums/x223/badwagon/Lego%2030r/30R14_zpsaaf7afcd.jpg 265/35/19... Build Thread to my 3.0R Build Thread to my Super Crazy MR2 Link to comment Share on other sites More sharing options...
Drift Motion Posted April 14, 2014 Share Posted April 14, 2014 I had 17x9 +38 with 245/40/17 Link to comment Share on other sites More sharing options...
SpecB82 Posted April 15, 2014 Share Posted April 15, 2014 I had 17x9 +38 with 245/40/17 That's gotta be 1 tight squeeze..... Sent from my SCH-I535 using Tapatalk Link to comment Share on other sites More sharing options...
Drift Motion Posted April 15, 2014 Share Posted April 15, 2014 nope, has more room than my 18x9.5 +38 with 225/40 setup... Link to comment Share on other sites More sharing options...
boxkita Posted April 15, 2014 Share Posted April 15, 2014 http://legacygt.com/forums/attachment.php?attachmentid=177180&stc=1&thumb=1&d=1395097506 275/30/18 Continental slicks on 18x9.5 Enkei RPF1. -2.5 camber front/rear Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
Zero1 Posted April 15, 2014 Share Posted April 15, 2014 This thread is long overdue... Link to comment Share on other sites More sharing options...
zqcebtmu Posted April 15, 2014 Share Posted April 15, 2014 OMG 275! http://legacygt.com/forums/attachment.php?attachmentid=177180&stc=1&thumb=1&d=1395097506 275/30/18 Continental slicks on 18x9.5 Enkei RPF1. -2.5 camber front/rear Link to comment Share on other sites More sharing options...
mattg Posted April 15, 2014 Share Posted April 15, 2014 About as meaty as you would want on BBS. 235/45-17 http://photos.imageevent.com/mattg/legacygt/large/IMG_4784_2.jpg http://photos.imageevent.com/mattg/legacygt/large/IMG_1616.JPG Link to comment Share on other sites More sharing options...
zqcebtmu Posted April 15, 2014 Share Posted April 15, 2014 Any issues running those tires and wheels? I ran 18x9.5 +38 rpf1 with 255/35/18. Rolled/pulled fenders Link to comment Share on other sites More sharing options...
gordata Posted April 15, 2014 Share Posted April 15, 2014 About as meaty as you would want on BBS. 235/45-17 http://photos.imageevent.com/mattg/legacygt/large/IMG_4784_2.jpg http://photos.imageevent.com/mattg/legacygt/large/IMG_1616.JPG Man I really like this setup. Link to comment Share on other sites More sharing options...
lingling1337 Posted April 15, 2014 Share Posted April 15, 2014 Mattg those are 05 sti wheels right? Link to comment Share on other sites More sharing options...
mattg Posted April 15, 2014 Share Posted April 15, 2014 They're 2004 STi wheels. The only year they were 5x100 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now