thisisthenewsic

solddd and shipped

Yes, it has it on the center of the Support bar and also on the strut tower mount.

upppp

uppp

i have front and rear kartboy endlinks. only on my car a few thousand miles in great condition. missing 2 washers and 2 nuts, but can get at any hardware store for a few bucks. 150$ shipped obo located in temecula california 92596

i have for sale a almost brand new rare jdm carbing strut tower bar with master cylinder brace. for left hand drive. installed on my car for only about 1000 miles or so. been sitting in my closet for a few years now. 350 obo plus shipping. located in temecula california 92596

pmed ya

Front hub/bearing is easy. Rear is the issue

lol sorry. next time ill say hes my buddy lol. yeah. he wanted to meet up this weekend or next. and i might be able to do it next weekend. but it depends on my schedule and if i can get time to go down there. one step at a time. i want to search and try to find a company who makes wheel bearings that will make a good product and also make them in a 5x114.3 lug pattern.

My buddy's friend has the molds now. He is the new owner of all the Karlton flares and he is producing them. Karlton does not own them anymore. I actually just talked to my buddy's friend today. I should be meeting up with him In the next 2 to 3 weeks hopefully to talk about getting this going.

Sorry. Didn't mean to clutter your thread. I was just trying to explain since I think there was some confusion on who had the molds now ect. Ill just keep it to pms. Once again sorry. Didn't mean to step on any toes

Karlton sold all the molds to my friends buddy who now produces them. So contacting Karlton wont do any good.

hes doing some reworks on the molds for some of the kits he already produces, then he said he should be able to work in my car. hopefully in the next few month i would assume since he didnt give me a time line, besides saying soon

the new owner of karlton flares is planning to make a set of these for the lgt, he's good friends with my buddy. so he will most likely be using my car for mockup and first install. ill try n find out how soon he's looking to make a lgt set.

wheel/tire specs if i missed it?

I ran 18x9.5 +38 rpf1 with 255/35/18. Rolled/pulled fenders

where in socal?

The 5.0xtr is a 2000$ turbo. You could easier put together a rotated uppipe precision turbo and downpipe for that price. Or even a single scroll borgwarner turbo setup

Why not switch to a rotated setup? Since you are already replacing the uppipe Ect. Also no e85?

i did the spec b shift linkage with an sti lockout cable. had the same problem you had where the cable seemed a little short. but you could always call the dealership and see if the spec b has a different part number than the sti. if so, it might be different lengths. i was able to make it work, just took me a while.

I paid about 600$ or so for my driveshaft shipped. A used driveshaft was about 150$ plus shipping. So around 400$ difference.

Not saying it can't handle it, I'm saying with higher mileage, and higher hp it puts strain on the joints. Will an auto driveshaft work. Yes. Would I rather do preventative maintence and spend the extra 400$ and do it once. And never have to worry about it again. I plan to track my car, so it's gonna be put under load alot more than a daily where you might do a few pulls here and there.

I did not want to buy a used automatic driveshaft. I wanted to replace as many parts as possible with brand new parts. Also to run a auto driveshaft you have to swap the diff flange and the custom driveshaft I had built is a lot beefier than the auto driveshaft. I'm doing a built where I plan to make 550-600whp on e85 so I'd rather no risk having a part fail on a used driveshaft(u joints Ect) I did a custom 2 piece.

heres my list of parts/part numbers and pricing from my complete 6 speed swap for anyone looking to do the swap. i did not shortcut or cheap out on any parts. alot of parts were new or very very low miles 06 sti transmission w/shift linkage $2,500 06sti rear diff $425 rear spec b axles $750 dealership 28421AG03B rear diff axle seals $20 both 806732200 driveshaft 6 speed/r180 (spec b/05-09 4eat) $600 1(866)4556622 Jeff Driveshaft Specialist (i went with custom built, not auto driveshaft) spec b shifter rod $31 35041AG020 spec b shifter stay $51 35031AG020 Downpipe support bracket $24 44021fe030 6mt clutch hose $27 goodridge 6mt slave cylinder $50 Reverse lockout cable $75 35060ag010 clutch kit(act hd-ss sti) $650 circuitmotorsports sti flywheel $100 cobb sts/knob/bushings $190 (used 6 speed) torque solutions(engine/trans/pitch mount) $485 mtrperformance.com (only need trans mount but i replaced all of them) clutch fork spring $8 whiteline rear diff bushing $130 rallysportdirect.com kdt901/903/905 (extras i added to tighten up the drivetrain spec b rear aluminum diff mount $133 41310ag040 05 STi 6MT front half shaft seals $20 both L/H 806735240 R/H 806735230

His motor is toast because of the turbo failing and sent metal through his motor ^^