stewdogg

Thanks for the heads up Zee! Any suggestions on a good option(s) for a solid BPV? I have seen the Turbosmart Kompact BOV mentioned a couple of times, anything else nicer than that?

I ordered my Kartboy short shift kit with the Perrin brass bushing. I ordered some trans cross member Whiteline bushings as well for when I replace my center diff. I will be ordering my center diff today as well. I'm thinking about just getting a J pipe now too because I have to remove the exhaust to access the center diff anyway. Those nuts/studs on the J pipe look scary rusty. I'm going to start putting some grease on the bolts over the next week to see if I can loosen things up a bit before I have to get in there and attempt to get those studs and nuts off without breaking them. I'm trying to decide if I want to get a new BPV at the same time and just get the pro tune right away or run stage 2 Cobb tune for a bit and test things to see what I really need. I saw a system pressure test around here some where, I just don't recall if it tests the BPV...? I wish I didn't have to put the money into the center diff, that cash could be spent on something more fun for sure!

Good to know... I would have thought the bearing to be smoother than the bushing. Ugh, I'll kick myself when I find out, but what does NVH stand for?

Looks like the Twilight Blue Metallic from here. Congrats on the new car!!

This is the kit I will be picking up because it has a bearing over the bushing and claims to shorten the throw by 38% compared to the 30% claim by the others I have seen. http://www.kartboy.com/x4/product.php?productid=16286&cat=278&page=1

I put a new plastic skid plate on my GT last night. The one on the car was busted in half and had the turbo exposed, so I figured I should at least get that covered up for now. I picked up a new plastic cover for $45 shipped and it fit nicely. https://www.carid.com/2010-subaru-legacy-chassis-frames-body/replace-engine-cover-83727922.html I will look into the aluminum skid plate if I get that far in the mods to warrant it. Still gotta figure the center diff too...

Man, it's nice to get all that dealt with under warranty, especially the torque converter! I have never owned a new enough vehicle to run full synthetic oil. I always find it leaks more and usually has more engine noise too. I run 20% Lucas oil stabilizer with conventional oil to deal with the heat.

I changed the rear pads and rotors tonight. I had to hammer the pads out of the mounting bracket, they were seized in pretty good. I also had to file a bunch of build up out of the bracket to get the new pads to fit tightly, but move freely. The brake pedal feels better now, I don't think there was a ton of breaking happening back there the way it was. Now on to figure out the center diff issue. I'm going to search to see if there's an upgraded option for the WRX or something that I can use in the LGT...? I'm probably going to get a J pipe at that time too because I'll have the pipe off anyway and might as well upgrade.

Does anyone know if there is an aftermarket option for the Viscous Coupler?

No, I have all 4 tires the same size, but don't know what it had on it before I got to it at 126,000 miles. I heard/felt the noise when I had the wheel turned and moving either forward or reverse. Seemed like the inner/outer tire was slipping with a clunk after the slip of the wheel. I can drive to work (about 10-12 min and never get over 60mph) and maneuver slowly into a parking spot without any noise. The sound only came after driving the car for 45min or so, which seemed like something heated up and caused the issue. I'm leaning towards what your gut reaction was, dgoodhue and not a suspension part.

So, the VC is the Viscous Coupling? That's basically the center diff? I did a little searching, but didn't come up with much. Anyone have a link to a walk through or any info on the 5th gen? Is it a failure of the unit or overheated fluid that needs to be changed?

Finally back from vacation and got to take the car for a first drive on the twisties. It was one of the first warmer days around here at about 80 degrees. I went for about a 30/40 minute drive and stopped for some food. When I backed up slowly with the wheel turned I was getting some slipping and a clunk in the front, I believe. It did the same while going forward slow and turning the wheel. Kinda seemed like one wheel wanted to slip, like the limited sip wasn't working...? I guess either that or a CV joint. I will be putting it on the rack this week and checking the diffs and the condition of the fluid in them. I will also be putting on my rear brakes and new PS valve cover gasket this week as well.

Cool, I have family in Downers Grove. I will have to line up one of the Subaru meets with some family time and knock a couple things off the list at once.

Hey Humble, are there any other meets coming up this summer by you? I would run down for one if I'm free. What side of the city are you on? I forgot if you told me already.

What happened there? Hit a chunk of ice? Bummer!

That's brutal! We only got 4 or so inches, but it's still snowing today. This sucks! I can't wait to go to Mexico this weekend and with no snow to mess up my travel plans... I hope. Good luck melting that crap off quickly!!

I had to clear stupid snow off my 5th gen today... BOO!! Hey Humble Rumble, where are you going out of the country? We are leaving next Saturday for Mexico City for 9 days. It's supposed to be in the 80's there, which sounds awesome right about now due to all this snow in April.

I took it out to my mom/step dad's to sell it. They live on a busy road and sell cars quick there, so I essentially took it to it's new owner. There is a nice amount of twisty road on the way there to have fun one last time with the ole girl. It really made me want better seats and suspension in the GT. It was unfortunate, but it got the cancer (rust) and that is an almost impossible thing to fight for too long. How difficult was it to put the bugeye seats in the Baja?

Thanks for the tips guys! I just took my 02 WRX wagon to it's next life. A nice little nostalgic drive there. I wish I could take the seats out of the Impreza and put them in the Legacy.

Thanks for the nice welcome islandborn! This forum is the only reading I have been doing lately. Do you suggest the skidplate in general or only really needed if lowered? I really need to get the shocks and struts dealt with in this thing, it floats/bounces around the road the way it is now and that's no fun. Thanks Nate!! I'm in for a meet up, but you should come down south here where it's just a little warmer! How often do you get the P0420 code? I have only gotten it 2 or 3 times in the last few weeks. I will grab an o2 sensor next time it comes up and see if that helps. Yeah, I still have an all stock exhaust. I have some rear brakes getting dropped off today, so I will be doing that first and then on to other things.

Thanks for the heads up cww516! It does sound like a better idea to have the best of both worlds by having the option to go stock or 1" drop and get the Eibach springs. Do you guys have a place to get the best prices on the konis and Eibach's? or a good local fella or someone on the forum to support for the parts? Just talking about it really is making my mouth water for that Burger Huas burger. I might have to take a run up there soon, hit some twisties and eat a burger. I co-own a bar in Sheboygan and get up there pretty often. If you ever go for a run in the Kettles, let me know. I can coordinate it with a visit to the bar too and get two birds stoned at once... sorry, it's a Trailer Park Boys reference.

OH man, have you ever made the short trip over to the northern unit of the Kettle Moraine Forest? It's over by Plymouth and a pretty large area south of there. The roads are made for an all wheel drive turbo. There is a cool outlook called Parnel Tower to use for a destination... https://dnr.wi.gov/topic/parks/name/kmn/trails.html There is also an awesome burger joint towards Horicon Marsh called The Burger Haus. https://www.facebook.com/HamburgerHaus/?rf=799164686865278 I guess you have me back to thinking about getting the Eibach springs again. They drop the car by 1", right?

Thanks for the welcome BBpeik! I certainly don't need an enabler, but it helps. Thanks FLlegacy! I'm a little suspicious too, but the rest of the repairs look good. I guess I will just have to hope he drove the car before the sealant cured fully. I didn't see it till I got it on my lift either. They make it a little tough to see much on these cars without removing all the plastic shields. Haha, mine are creaking and bouncing all over, so they are even more crap now. The Konis are sounding too nice to pass up. Thanks hazard! I'm not sure the extent of what I can do with the Cobb tuner at this point. I need to do a little more research on it and figure it out. Thanks for the offer of help, I might take you up on that later. Thanks for the info cww516! The car does run fine and I only seem to get the code randomly at this point. I will look into the rear o2 sensor and see if it needs replacing . Do you scrape the front end in any driveways or anything with it lowered? Is there much of an advantage having it lowered other than it being more sexy? What part of central Wisconsin are you from? Plenty of nice roads around here to test that Koni suspension on.

Hello I have a new to me black 2010 Legacy GT that I purchased almost two weeks ago and it has 127,xxx miles on it right now. I'm coming from a 2002 bug eye WRX wagon. It was my wife's car and I got it as a hand me down when she bought her 2005 Forester XT automatic... she likes her turbos. She leaves them stock and I try to talk her into modding them mildly. The WRX I just left stock and used as a get to work vehicle, but rode my motorcycle more than anything. While looking for a new car I came across this bad boy and now I'm really digging this thing. The WRX was fun, but could really get on your nerves after about an hour or so on the rickety roads around here. The story of the car as I know it is that it was owned originally by a machinist and he must have put some machines in the back seat because there are some ink stains randomly around the back of the car. I got most of it out while detailing the car after I got it. The car is in good shape with no major dents or damage to the inside of the car. The driver's seat is cracking a bit on the left side seat bolster. I have a friend I will go see about fixing the seat. I will ask him about adding some more structure to the bolstering at that point too. The machinist decided not to change the timing belt and at ~122,000 miles the belt slipped and some valves got to meet each other. The mechanic he brought it to bought it from him and did the valves, heads, timing belt and clutch. The mechanic then sold it to the kid I bought it from. The kid I bought it from put a Cobb tuner in it and decided after 9 months and ~4,000 miles that he wanted a pickup truck again. Said he drove his dad's pickup more than the car, so I got me a 5th gen Legacy GT! The current mechanical condition of the vehicle: I had a bit of a rumble in the car that I could feel in the seat of the car and steering wheel. Seemed to happen after 40mph and got a little different with gas, but no different with the clutch in. I ended up finding a bolt missing in the driveshaft connection to the rear diff output. I replaced it and the vibration has gone away. The right side valve cover is leaking and I will be replacing that next weekend. I ordered a new plastic front under shield from CARiD, it was $46 delivered and got here in a day. Part of the shield on mine was missing. I'm getting the damn P0420 code for the catalyst system and I'm wondering if when the timing belt went it got the cat dirty? I will monitor the o2 sensors and see if I can figure things out a bit more. I suppose if worse comes to worse I will just have to get a new aftermarket cat and a new tune. The banjo bolts on the turbo oil lines look like they have slow leak, but not an active leak, so I will keep an eye on them and replace the washers when I can. It needs new rear brakes. I ordered some slotted and drilled rotors from Performance brake... I will find out it they are any good. I think someone sprayed the brake calipers red too because they don't look like a factory job. The suspension is shot due to the miles and I have been reading for two weeks about power and suspension mods. I think I have come to the conclusion to do the Koni drop ins with the stock springs or the 2013-14 Legacy springs. I live in WI and I'm afraid I will regret dropping it in the winter. I also noticed that it just makes it on my 4 post lift at the current height. Are the Koni's really worth $350+ compared to the KYB's? Sorry about the ridiculous first post, but there you go. Oh yeah, I will post some pics as soon as I choose a hosting site, again.