-
Posts
698 -
Joined
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Posts posted by Marvick08GT
-
-
P0171 is usually indicative of a vacuum leak.
Possibly turbo inlet, most likely plenum to TGV O-rings. Do you already have the newest orange gaskets? This is probably the most common problem when I get brought subarus that are not running right. Good luck!
Edit: forgot this was sidefeed, I remember reading your thread awfulwaffle. Good call to check as far as the misfires.
-
-
Coolant does go into the turbo as well, just not from that hose.
-
I agree MDSubie4, took me 3 months but I got them to replace the lines from the ABS Back. Lots of arguing, but I did not spend 1 cent.
-
Found a set of factory TPMS sensors for $20 shipped on eBay (verified working by tester) I also ordered some torque solutions metal stems to go with it.
I asked for some pics so I should be able to update soon.
-
I don't believe the 09 are compatible with the newer system.
You need a tool (I have an Autel TS-508, there are cheaper options available)
ATEQ Quickset has a summer winter switch mode and can program the subaru tpms computer.
-
Found a black aluminum N/A hood at the pick and pull down the street. There are no dents, only a few scratches. Should work well until I get it painted.
A steal at $54!
Edit: I did have to carry it almost half a mile smdh...
-
? I don't have a carbon fiber driveshaft. I have a brand new subaru driveshaft per my builders recommendations. I have had CF and Aluminum before on different vehicles, you can tell the difference but there is almost always vibration at high speed
-
Found the correct prosport center cap in Russia to replace the damaged one in the set I just bought. $70 shipped from Russia wasn't so bad (loss of time and sanity!)
-
Sure did, now I'm on the hunt for 1 center cap. Found 1 in Russia, but still looking! Also found a place that sells the carbon fiber overlay that says prodrive, so once I find a good one I will probably powdercoat and then throw new emblems on.
Can't wait to put these on, should be night and day with my factory 18"s and Michelins...
-
Use a flat rate box from USPS.
-
Ordered an Autel TS508 TPMS tool. Can clone my existing tpms to the prodrives to make it easier. Also works on almost every other make/model.
Lightning sale on Amazon, about 10 more hours!
$70 off
-
The prodrive GC-010E setup and STI front strut bar arrived from InfoSecDad! Thanks again!
Still waiting on the rev D mesh grille and grampus folding mirrors!
Can't wait for her to be ready..
-
Yes it will fit if it is complete. It should not be broken or leaking. For $200 can't really go wrong. Good luck
-
Bought some wheels, jdm strut bar, grille and grampus blue mirrors. Already had the power fold switch and picked up the harness from our boy in (HI) AW4BYT.
-
Car is at the shop, once they give me the ok I can grab the downpipe. You are on the other coast, shipping is not going to be cheap.
-
Payment sent for strut bar. Appreciate it!
-
To the top! Found all of these parts when I moved! Let's goooooo!
-
How much for the strut bar? Loving the wheels, wish you were closer
-
Update from Agile:
Engine is out and torn down, heads are at the machine shop!
-
I have a Cobb catted downpipe coming off my car, also has a blanket. (Has extra bung for wideband)
Only has about 5k miles on it.
-
What are the High and Low pressures at idle? 3000rpm? It could be a bad output from the HVAC control, you would have to do some testing when it fails. (Manifold gauges hooked up and a meter or probe to check signal to the compressor (or sensors).
Found a diagnostics chart:
-
Sorry I sure don't, I remember buying it from Roger Clark Motorsports if that helps.
Will be selling it soon along with lots of other stuff, car is in the shop getting a heart transplant!
Marck
-
For the driveshaft you just have to call DSS, not listed but they have it. ~1k
P0171, P0301, P0303 enter the chat!
in Fourth Generation Legacy (2005 - 2009)
Posted