Marvick08GT

I am assuming you are referring to the Group N trans bracket bushings. They fit everything 5spd/6spd. The trans mount is 6spd only and the rear diff mount is the same part between models as well.

As title states, parts were on for about 1300 miles.

Price does NOT include shipping or PP fees. Worked great with the Blouch, too much power now.

 

AEM 340LPH Pump $65

 

Group N transmission mount (STI) $75

The cracking is the paint since it is almost new, I scraped it off with my finger in 1 spot to verify.

 

Group N trans bracket bushings (STI) $25 (20 if purchased together)

 

***SOLD*** Complete diff mount with Energy bushing. $80

 

Be safe and let me know if you have any questions.

Installed Cusco transmission mount and differential mount. Also installed solid driveshaft bushings and whiteline trans bracket bushings.

 

Previous had Group N trans and bracket bushings, and the energy suspension insert in the diff mount.

 

She feels solid again, no more bucking on/off throttle. Very happy.

Got the car back! Feels like a different animal. Timing and boost are lower due to the 1300's (@28psi now,, need 1700's to raise and keep safety margin, base pressure is @60) other plot is the 26psi Blouch 1.5xtr.

 

Have a complete whiteline bushing and arm kit going in. Also got the cusco type 2 lower brace (with the control arm triangles) rear diff brace and trans/engine mounts. (Group N cannot handle the power)

 

Once all the suspension is done need to get an alignment as well.

Ordered 3mm hubcentric spacer/adapters (56.1mm-73.1mm) may or may not install. These will bring me to ET45. (And clear brembos in the future if necessary)

As far as I have seen, you will lose any of the functions tied to the Nav. 08 spec B here, tired of looking at this old ass Nav.. I will check back to see if a solution is found. Be safe.

Give Cobb a call, they are cool guys and really care. I have not had an issue with getting support for any Cobb parts.

Killer B inlet SOLD to Boxkita! To the top!

Cobb Downpipe sold to Tehnation! To the top, prices lowered.

 

Pic of studs for uppipe

Cobb Catted Downpipe (1k miles) for sale in my thread. PM if interested, will give you a better deal. Great thread BTW, I am too ADHD to document lol

To the top!

Blouch 1.5XTR SOLD to samuelwilliams082799

Regarding load, I was just curious what kind of load I would hit on wastegate boost only (in case I installed it with my stock injectors until I can install better ones).

 

You need injectors, just wastegate pressure is 15 or more psi (check the Blouch website)

 

I will have a set of ID1300XD2 for sale soon(1300 miles.. Tuner misdiagnosed), they are getting refurbished by ID so I can sell them and sleep at night (even though they weren't the issue..) lol

Stock inlet size, lots of interest don't sleep on it!

The grounds are right under the throttle coupler, firewall side on the tgv (drivers). When I removed all of that I extended a ground cable to the starter ground.

 

When I had that issue with my accessport, the pins were loose on the OBD-II connector.

I've had the Morimoto XBs for years. Great light!

Build info on my ridiculous build thread.

 

ID1300xd2

Aem 340 lph

Injectors were not the issue, the AEM couldn't keep up. Had to taper boost after 6k.

Can't compare to the VF52 spool wise, but there is more power everywhere (it feels like there is)

Everything else is classified..

Made 478/466 and was de-tuned to 445/450. Great setup ran great with my GS tmic. Started pushing coolant under WOT (engine had 190k lol)

Spoke with Agile, new engine etc (so why not more power?) Turbo Fuel system etc.

 

Can't wait for the results of my current build!

Looking to sell some of the parts I had on my 08 LGTB.

 

 

All parts have about 1,500 miles (1126) , header has 8k

 

***SOLD*** Blouch 1.5xtr 10cm (bought directly from Blouch) $1360 (paid $1800)

 

 

***SOLD*** Cobb Catted downpipe with Thermal Zero blanket $580 (O2 port drilled through nameplate)

 

Perrin ELH Coated header (new version no slip joints) $800 ($1500 new)

 

***SOLD*** Grimmspeed coated and wrapped up-pipe. $160 ($300 new)

 

2020 STI heatshield modified for the blouch $30 (looks new)

 

***SOLD*** Killer B inlet Pipe BNIB $265 (didn't work with the EFR)

All stock location turbo (2.4", 2.5") cars except the EFR LMFAO

This is the radiator in the pics here. Stock fans

I'm dead...

Dropped the car off... keep Speed in your prayers.

 

They will have the car for 3 days to tune the part throttle and cold start for E85.

Will also be installing a RIFE IAT sensor, seems cool and I wanted to check it out!

Trying to get a 30psi every day map and a 34psi "kill" map. Up to the tuner of course.

 

The chase bays coolant reservoir is incredible! Great design and I highly recommend. I also have the AN power steering setup to install as well.

 

Will update once I hear something.

 

Getting ready to list my 1k mile used parts as well.

Car is getting the first real oil change tonight. (993 miles)

Motul Xcess 5w40 (builder recommended)

 

Went to install the KTA124 yesterday and realized I needed a few more bushings to complete it.(after I airhammer the bolts out the factory bushing will be toast.)

 

W63394

W63396

W63397

W63398

 

Some pics of how it sits (dirty.. lol). Waiting on the paint to arrive so I can spray the mirrors and install.

As far as I know the only difference in driveshafts is the carrier. Might be able to use metal to make a small bracket to make up the difference. (Driveshaft will bind if the carrier is not low enough)

Once you do the suspension swap, pull the bracket out and bolt the carrier directly to the body. Good luck!

~700 miles and counting!

Wanted to throw the wheels on, makes a HUGE difference from the stock 18's. Turn in and overall feel of the car has greatly improved.

 

Going to make sure the preload is set correctly on the dual IWG-75, I don't want any phone calls of not hitting 30+ psi...

Either the bulb is blown or someone disconnected the daytime running lights relay. Under the drivers kick panel, that relay also controls the high beam indicator.

I have HIDs, so I have mine unplugged, this is a side effect. Good luck!