-
Posts
845 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by PATS4LIFE
-
-
Yes, exactly (34130AL010)
Took me like 5 min to replace and that enjoying rattle over small bumps is gone
Sent from my Pixel 6 using Tapatalk
Is it still the same spring or a much stronger one?
-
Yes, exactly (34130AL010)
Took me like 5 min to replace and that enjoying rattle over small bumps is gone
Sent from my Pixel 6 using Tapatalk
Thanks!!
-
Spring maintenance:
- spark plugs replaced
- clean air filter
- PCV valve and hose replaced
- oil change
- replaced the spring kit to fix front rattle
Sent from my Pixel 6 using Tapatalk
What spring kit is it?is it for steering rack rattle?
-
Heading to Bakersfield Saturday morning.. Got a Car Show im Fresno Sunday.. Maybe we can meet up Saturday for a minute or too
Sent from my SM-G988U using Tapatalk
Oh man i am out of town all week
Didn’t even know there’s car show at Fresno.
Could’ve been nice to meet up.
-
last time i asked it was $95hourly but that was last year at bakersfield subaru.
-
My advice is to clean it up,then just keep checking if it comes back.
do you do your oil change?maybe you or whoever did the oil change could've spilled some oil during refilling.
wait nvmd you said passenger side so refilling spill is out,but ya just clean it up and just keep checking and see if it'll come back.
could be your valve cover gasket.
-
Finally decided to change front and rear fluid @61K,rear was easy, as for the front a bit more work and had issue when i was filling it up,i already put in about over 2 1/2 qts and still no fluid coming out of the check hole,i was like worried a bit but i decided to check the check hole and found a bunch of sludge blocking the hole and so i used a screwdriver and poke the hole and fluid started flowing out,so i just let the fluids come out till it comes to a drip and closed it up,but car runs much smoother.i used Mobile 1 75/90.
-
just the actuator part is electronic. there is still a butterfly plate that gets carbon build up. when i was a lowly express tech at the dealer we often had to clean the throttle body after disconnecting the battery or doing an ecm update, as the cars would fire right up, but die. douche a rag with throttle body cleaner, push the plate open by hand, it only goes 90 degrees before hitting its stop. wipe both sides of the plate and inner diameter of the throttle chamber. you can be more aggressive with it than you might think. when you go to restart it will crank longer than normal but it may fix your issue.
honestly i'd be surprised if it wasn't something they already tried to do, if it was an actual subaru dealership that is. I have found being in the independent world that these newer cars are a bit of a mystery. the diag tools available aren't as good as subarus.
Wouldn’t disconnecting that battery then cleaning throttle body then connecting battery back would screw up the idle?
-
Yes get an amp and also you need LOC.
You don’t have a stock amp do you?
-
Could be engine mount,exhaust heat shield.
-
How about the EGR drain filter?
Part# 42072AL00A
-
When I had H&R springs my rear tires were wearing on the inside of the tires,but front tires were fine,even when I got it aligned
-
I used siless 80mill damper on all four doors inside and front panels,tank area,almost all inside trunk and also over rear wheel wells and behind rear fenders/quarter panels,made the car much much quieter,was going to do the roof and rear deck but my daughter will be taking over the car soon
-
What did the dipstick read recently or just prior to draining?
Prior to draining oil level was very close to bottom dot.
-
Did an oil/filter change & cleaned air filter!!
Drained oil for about 30min and got 4 1/4 oil out from 6K Miles interval.
-
New tires & front/rear fluids changed.
Sent from my iPhone using Tapatalk
What tires did you get?will need new ones soon.
-
Just finished washing car,I’ll be changing differential fluids this weekend,and next month my daughter will taking her away from me:(
-
I'm looking to start a 2016 Legacy 3.6R Air Suspension project, the typical Airlift 3P Management and bellow/over setup. However, I can't seem to find many others who have any information on a bag setup for 6th gen Legacy/Outback cars. I have questions that I hope can be answered for both myself and anybody else looking to use this platform for air ride.
- What air suspension are you using and where did you find it? Full Airstrut setup from a specific company, or bagover/sleeveover coil setup?
- Does any body/subframe notching need to be done in order to fully air out?
- Is 5th gen air suspension compatible? (in the lack of availability for 6th gen airstruts)
Not looking for any "just buy coilovers" or any basic non-answers. Looking for air suspension related answers only preferrably from anybody currently running bags on a 6th gen legacy or outback. If there is already a thread available (once again- AIR, not coils or springs) please direct me.
They make one for 6th gens
Just contact them.
Grnlantern1 has a nice setup,might wanna message him.
-
Man that’s ruff best of luck getting everything resolved. If ur in the market for a new LOC I use the DS18 5channel LOC. I think it was $60 maybe so not to bad.
Ya I had that DS18 LOC for back up that’s what I have hook up right now,but I figured out the issue on the LC7 I opened it up and the solder on the ground broke off, so I went ahead re-tinned it and it’s back up running again.
—————————————————
HPS intake, Nameless Axleback Exhaust, SSD FSB, Cusco RSB, 20mm rear sway bar, Voxx 18” rims, Infinity Kappa system,
More to come...
-
How hard is it to remove seats ?
Removing seats aren’t hard at all,just some bolts and clips.
-
Wait if you drill 1/8” hole on the thermostat housing wouldn’t coolant leak out?unless you meant the thermostat itself?
-
Day is not good right now,was making adjustments on my audio,and all of a sudden smoke coming out my sub box ,one of my sub coil burnt so I remove it and just left the other sub on then turned on my radio and no sound an any of my speakers,found that my Audio control LC7-I went out too����*
UPDATE:Fixed my LC7,and Skar Audio is sending me a new Sub since it was still under warranty…
-
-
Also if you have the push start,replacing the remote start with aftermarket won’t help,it will still shut off the engine when you open the door.
Customize steering wheel
in Sixth Generation Legacy (2015 -2019 )
Posted
Anyone of you guys bought steering wheel from them?
https://kocf.com/products/custom-carbon-fiber-steering-wheel