-
Posts
465 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Shadow_419
-
-
-
That's a serious backlog but more than a week or so is excessive in getting heads reworked. They should be done sooner rather than later
-
rough... how much do you want for your yellow hellas?
Lol. I'll probably reuse them. I really like the sound. I just diy the bracket and connections. The horns are pretty cheap on their own.
-
You walked away that is what matters. Take care, I am sure you will start feeling more when the adrenaline wears off.
Happened last Tuesday but honestly nothing happened to me at all. Didn't feel any after effects. Slightly embarrassing to get into an accident where I lost control because of snow/ice.
http://i.imgur.com/phHTwPq.jpg
-
Pains me to say it but I'm pretty sure my GT will be getting totaled by my insurance. I walked away without a scratch not even shaken up a bit. The car between age, milage, and damage will probably be a total loss. The car gave me trouble but I still enjoyed driving it so much.
-
Alright, I have a Uhaul car carrier(flatbed)/pickup truck set to go for this Saturday. I will be hauling the ole girl to my mom/step dads to get this fun started.
Islandborn (or anyone with experience) how did your rockers and lifters look when you did your rebuilds? Need to replace any/all?
Ej25 doesn't have either of those. Lobes from the cam ride on the buckets to open the valves. Definitely want to double check your clearance when you torque everything back down and you may need to replace buckets to get the right clearance.
-
Maybe I am just crazy, but I seriously doubt such a small "brace" would make any kind of measurable difference in chassis stiffness. Especially on only one side of the car. Seems like a solidly mounted skid plate would be miles ahead.
I'm thinking these are supposed to be installed in pairs
-
I live in MA and they salt the crap out of the roads. My car has lived in MA it's entire life. The subframe has spots with some surface rust, but no place at all is it rusted through.
-
do you use a bracket or aftermarket harness for the horns, or just cut and splice for the connections and stock mounting brackets? Can the harness/pigtail be removed from the OEM horns and attached to the aftermarket horns? I am considering these, but wasn't sure what was the best mounting (I know there are brackets available for the WRX, but wasn't sure for the legacy)
Made my own bracket from a steel tie from home depot. Little bit of primer and rattle can flat black. Not the best picture6
http://i.imgur.com/KLRFEIc.jpg
Wired it myself. Just used the relay that came with the horns. Fused 12V from battery, signal from factory horn wire, and a ground for the relay. It's not super neat in a loom but it's not a rats nest either. There are guides on wiring them up.
-
My horns went out - had Hella supertones - so gonna try their sharptones... sorta will add a bit of color in my front as well....
I have the sharptones and I definitely dig the sound. It's only been a little less than two years so far but holding up well
-
We don't have a pitch stop mount.
That's the correct tranny mount. Consider adding these too: Energy Suspension 19.1103G Transmission Crossmember Mount Bushings
that's my plan.
10LGT
You'll definitely hear more noise from the transmission with the mount and the polyurethane transmission crossmember bushings. It's not obnoxious and the positive engagement feel is worth it imo.
I spot your ride from time to time in New Bedford
-
Oh wow, so I assume it’s a lighter flywheel. I had no clue when I phoned in the order lol!! Also got dealer pricing and paid $950 not $1237. Well, got an oem flywheel I need to sell, not returning it
A good read
https://www.torquecars.com/tuning/dmf-solid-flywheel.php
Sent from my iPhone using Tapatalk
Flywheel on 5th gen is single mass anyway so a new flywheel for you. I just had mine resurfaced when I did my clutch.
-
Swapped all four corners to Akebono ceramic pads. Just so sick of the squeal and dust and don't need super aggressive pads for the winter.
I'm running Akebono ceramics in the front. Put those in when I did my front brakes and painted the calipers recently. Very happy with them for daily use.
-
Just changed my driver side cam sensor. Also cleaned off my battery terminals with the spray and battery tool since I took it out and added the little colored terminal washers. But now after that seems my auto up and down doesn't work on my driver side windowOn a lot of cars when the battery is disconnected the power windows and sun roof need to be recalibrated for the auto functions to work.
Just a guess as I have had to do this in a lot of cars but not for the Subaru yet.
Hold the window up/down button until hitting both limits. Once or twice. Should be fine after that.
-
Maybe one of the breathers for the valve cover is cracked it looks to be more dirt than oil.
-
The rebuild of my stocker was about a 10 days door to door but this was around Thanksgiving. Might be a little quicker without the holiday
-
Congrats legacygt community. I just spent $400 on some random stuff from Perrin, Boomba, Subaru Parts and Whiteline. You happy now?
Yes but even happier with pics of your new stuff when it comes in and gets installed.
-
Sorry to hear about the engine trouble. What exactly happened and have you thought about just going short block vs long block?
I used BNR for a stock turbo refresh and wastegate port. Fair price and pretty quick turnaround. New chra, wastegate actuator, and cleaned up and painted exhaust side on my stock turbo.
-
Found this thread with a part number. Maybe you'll be able to order it through s dealer or online
https://legacygt.com/forums/showthread.php/rear-spoiler-brake-leds-out-241355.html?p=5169869
-
Double check that you have it plugged in. I had mine unplugged for nearly 2 years never noticing it was out. It's a red led strip. Maybe diy a fix yourself if need be?
-
Ooooh snap!
It added a deeper tone and some volume, no drone, never annoying.
Mellow and not overbearing, yes I would say it would fit that description.
Its never physically tiring, my wife shows no indication she noticed any difference since I put it on, even in long trips, but you will definitely know it's there.
It's a "humble rumble"
Those are just universal mufflers with welded on connections I'm guessing? Happen to have the model number by chance? Looks like a center/offset muffler proxs
-
It was sitting up on the lift while doing the brake lines, so I took an upskirt shot of the Borla axlebacks.
... Snip...
How's the sound on those axlebacks? I don't really want to go full exhaust but a little extra growl would be cool as long as it's mellow and not overbearing
-
The only mounting points are the bolts that connect the strut body to the knuckle. If the jdm use a different knuckle the holes could be in slightly different spots but the strut tube itself shouldn't be any different. We're talking about the inserts I'm assuming
-
How well do these work with a stock exhaust? Do they still make car louder?
I don't know how much louder the Nameless is over the AVO j pipe, but I can definitely hear it when I get on the throttle. It's definitely not "l have an exhaust" loud but it's noticeable inside the car so I imagine outside as well.
engine rattle at 2500-ish rpm... thoughts?
in Fifth Generation Legacy (2010 - 2014 )
Posted