Fenrir1

Finally got the avoworld rear swaybar brackets installed. It needed modification like drilling and added spacer in order to fit. Also got the trans o-ring, sun dial, and passenger axle seals replaced.

Got the jxb performance driveshaft support bearing installed. Its a subtle difference but you can feel it.

#throwbackthursday when i had my first pos '05 lgt. That car was problematic but i still have my love for legacies all these years later obviously Vs now

Current setup for both legacy and forester. Which one do you prefer?? Hint* the more you look at the forester setup, the more jdm bits you will discover

Merry christmas. Brand new front brembo kit that i bought on black friday from fastwrx came along with the rear brembo adaptors and rotors and pads. Unfortunately i couldnt find a set of clean used brembos nor want to restore an old and beat up set from random ppl online becuz itll end up costing the same as buying new in total so i opted to buy a brand new front set. I found a used set of clean rear brembo calipers on yahoo japan and just waiting for me to click ship button. But next year project hopefully not too long of a wait. Got some mach v braided brake and clutch lines too

Thanks!

I have the jdm foot light from subaru and a cf push start that i will need wired.

Damd carbon fiber steering wheel on! Now its feeling alot more bespoke and cozy inside! Just need 2 more things and ill be done with the interior.

Finally...... been long overdue. Jdm hvac with bezel and hazard. Reused my old pioneer avic-5200 nex that used to be in my forester. Unable to connect it to the optional dealer sony screen in the back so i will be going to upgrade the unit to an alpine in the future. But this will do for now in the meantime while i save up. Used a lot of wire/adaptors from that ae64 guy

pov night drive

Got some goodies from boxer/beauty. Older subarus like the gc8 sti/22b have the sti tire pressure sticker on the door jam so i wanted to replicate that cuz why not? I did the same when i had my '09 civic si and used the jdm fd2 type r tire pressure sticker as well lol and 2nd gen legacies, i think, have the caution sticker on the passenger door card but im not gonna put it there. Ive always liked the sti sticker around the sti titanium shift knob in the 06-07 sti, example pictured below, (so many sti in one sentence) so i wanted to replicate that as well. Surprisingly, the whole sticker wraps around subieflow cf shift knob completely. I chose the black and silver to match the silver console and the t/b sti door sills as well as the color of the car. The other sets of stickers will go on the forester.

The jdm trash box and the weathertech liner compliment each other so much. The brick red seats are just

Finally bit the bullet and got something that i shouldve got when i bought the car last year, some weathertech floor liners

Just another night at the gym

pure laziness lol and im not motivated enough because i dont think my legacy is at its final form yet. however i do want to photograph it with my forester together because theyre very similar right now in terms of looks.

i cant wait until i take actual pics on my camera and see what u think of them

thanks! interesting you see the matrix lol i cant wait til it gets warm again and hopefully by that time, all my jdm exterior bits and pieces are on so i can finally use my pro camera to take pictures with!

Winter is here

Tested fitted the work zr10 thats usually on the forester on the legacy today. Cant say i like it, for some reason i like it on other peoples legacy vs mine lol what do u think?

thank you!

yes i most certainly will be keeping my controls lol i will let you know when i have the blanks for you

thank you!! i do have photography background but ironically, i havent taken professional photos on the legacy yet. all these photos u see are all from my camera phone, so i try my best to capture something that i see given my phone limitations. if you see my forester and 4c thread (under the build list), there are some pictures on there that ive used my camera for. the silver color certainly helps blend in any urban surrounding for sure. i tend to edit around that factor. here is where i got it from. i ordered it in June and it took about 3 months for damd to make it and ship it rhdjapan i suppose. then i had to wait another month due to their shipping delays. there are going to be some import fees from UPS or whatever carrier though assuming youre also in the US. https://www.rhdjapan.com/damd-sports-steering-wheel-black-carbon-red-stitch-ss358-d-f-bp-bl-sg-gd-gg.html