securityguy

Anyone know what the listed DISPLAY AUDIO update is and how to perform that update?

Just finished mine...all good!

I had the Conti DWS and I liked them a lot. Don't do run flats...horrible!

XT-sub, you're over thinking it................

Got it...in the US we always round up:p

^^^thought it was 24%???

According to the Subaru Nav update site, if you own a 2015, there is an upgrade available that will cost you $54 for a single update or you can pay $113 for a three year subscription. https://subaru-na-mapupdate.naviextras.com/shop/portal/newCatalog?view=item&salesPackageCode=262838

It's far less stressful if you have the beer BEFORE the install................

I am positive that when my new bar came there were new bushings in the box. I did not order them separate or pay anything additional for them. tigger - the stock bushings do fit the 19-20m bars. I just clicked the link that Row provided and you do get the bushings for the $89.95...that's what I thought and how mine came.

You use the factory bolts and bushings...all you need is the bar. If I remember correctly, it does come with bushings but not bolts.

If you're changing oil yourself, buy a FUMOTO valve...will be the best investment you ever made! http://www.fumotousa.com Get the one with the nipple so you can attach a plastic tube and drain the oil right into a container...ZERO mess!!! I've been using them for 15+ years.

I really don't think it has anything to do with your warranty. If you stick with a Subaru part and don't exceed 20mm I find it hard to believe you can be denied any warranty work. It's a anti-roll bar...that's it. It is EXTREMELY easy to do it yourself. 4 bolts as fredrik stated...I did mine in my driveway in under 30 minutes. A monkey could do it and I'm no auto mechanic...but I did stay at a Holiday Inn Express last night:lol:

^^^it wouldn't and should not compromise the warranty either.

Maybe I'll try the 30mm bar???

I think you're a millimeter or two off to the side. I'd remove and reinstall.....

I installed my HID kit from XD several months ago and extremely happy with the light output and looks. Far better than my initial LEDs that I purchased. Very easy install as Childish stated above.

I like the $22 Mobil1 much better than the $26 Mobil1:)

Roof antenna is Sirius/XM...Rear Window is AM/FM and behind the dash (standard for many cars today) is the NAV GPS antenna.

I have had zero issue with my LED license plate bulbs washing out my camera. I also upgraded the rear back up bulbs to ultra high brightness bright white LEDs and I can see fantastic when backing up with my camera.

^^^which in English means it's never ever coming

For us dummies...what is this about?

Without...canbus not needed on our cars

Agreed and load resistors are very small in comparison and need less space.

Danny, just so you understand, where we are mounting these there is nowhere to also mount with zip ties. I agree that you must warm up the surface greatly in cold weather. If you look at 3M's website or any other company manufacturing double sided tape, they will tell you that you must install above 65-70 degrees F for a solid bond to the surface.

Not where all of us are mounting the ballasts but there are other locations nearby that you can do a temp install with wire ties until you can use the tape. Not many good mounting locations for accessories as engine bays have gotten so tight over the years.