Zac88

Thanks for doing this!

Do you still have all the Outback Subframe spacers installed and such? I think some factory legacy Bilstein setups will be exactly what you want.

I would just upsize the tires and keep the ride height.

http://opposedforces.com/parts/ You can cross ref part numbers here

Thats some dedication.

Here's a video on the first parts of building it. After the video I used a bit of fiberglass matting and more fusor to fill the gaps in. Ultimately I would like to modify this current one a bit more to make the boot fit better and a few more tweaks. And then once it's all perfect, instead of painting it I would like to use it as a mold for a carbon fiber piece.

Love these types of projects, Good luck!

That looks amazing, great buy!

Starting with the round shifter surround, I bought a stock BRZ one and cut out the ring, used some Fusor 142, quick scuff and paint and here we are. Not perfect but now I know this will work, and now I can start on V2 of the design and make it perfect.

Any updates on the Mid rear spoiler?

There has been quite a few imported since 2018. Ive personally seen many GT's on the road and 2 SpecB WR

For the brakes, could you do the Caddilac Brembo swap?

Buy them all, would be nice to know a guy that I can buy parts off of

Finished up my testing on the OSRAM NIGHT BREAKER 200 H7, I beleive they are the best alternative to the Vosla 65W H7 if you cannot get them. OSRAM NIGHT BREAKER 200: 1200 LUX VOSLA 65W H7: 1480 LUX

In Canada we even had options for manual 2015-2017 outbacks

you dont need to make 3 seperate threads, just keep posting in your original one.

There was a local that had a 2008 Manual GT wagon.

You might have to just find another bolt in a slightly bigger size and tap it. Make sure the bolts are the same grade.

My engine has 250,000km on it.

What about Whiteline?

Ive replaced all the Intake manifold gaskets to the newer style, orange ones I think? its been a long time. Do I really need a full gasket kit and replace everything? I will be doing the valve covers for sure though as one has a small leak.

Timing belt and idlers have about 50,000km on it so nothing to worry about there. Just did the clutch,flywheel, rear main and that pcv cover, so those should be fine. What else should I do at the same time? Local shop has a deal on right now for Tomei parts so I will using their head gaskets.

I would check the switch on the side of the transmission. on my 98 legacy the reverse lights only worked if I wiggled the stick while in R.

Nice lift! I just put 1" spacers on the stock bilstein setup

Shipping logistics are insane right now. I only have 1 set of these left but should have another 10 shortly.