valleylegacy

Also added on Beatrush Laile Bushings to the Transmission Carriage section. Part Number - S76103TMB (stock photo)

Great progress today. The car is finished Mechanically. Electrically we are still working on getting the STI Recaro seats in and wiring up the rear fog light. ELITE AUTO COLLISION in El Monte, CA is giving her the ultimate body scrub and paint. A few more things added on the: Zero Sports Intake Pipe Part Number - 0413005 JDM HKS BL/BP Legacy TMIC Kit Part Number - 13001-AF010

Thank you sir. It will retain it's value and be a car that I can resell easily due to the unique nature of this build.

Got it will check it out

EDM LHD Center console is 50% finished.

she is at the body shop getting paint.

The ring lenses for the 06-08 JDM/EDM Center console came in today. I was also able to get the RED LED lights for the cup holder illumination that come on the S402. Eventually these will be installed. Part Number - 66155AG120 X2 S402 RED LED light fixture Part number - 66237AG000 X2

I'm based in CA but work between Japan and Vancouver as well.

Another shipment of parts I needed came from Japan. This time I was able to get the JDM BP5 Tuned by STI Legacy Wagon bump stops + washers. These are specifically for the Tuned By STI Wagon. They are thicker and much more stronger than the USDM ones or the spec B. The washer also gives you a little bit more restriction on suspension travel. I tried to get the S402 ones but they were not going to sell them to me without the ownership card. These will have to do for now. Tuned By STI Legacy Wagon Rear Bump Stops + Washers Part Numbers - ST2050921001 x2 - 20501AG000 X2

Yo good to hear from you man. Yeah this build is going to be epic and probably the only one like it in Los Angeles. It's been going really well. Can't wait till I get the seats in and get the car repainted. It's been an awesome journey. The car started up the other day and sounds amazing. I'll let him know you said what up.

Well I have had a few people tell me go WRB...but I've always liked white Wagons and I think down the road it's easier to replace parts (body wise) with a color code that is here in USA. SWP doesn't come on any Legacy BP BL model in Japan. Plus I know that if I ever wanted to sell this car after it's built...White Wagons with a EJ20Y + Tuned By STI 6MT package will be an easy sell.

I finally got the JDM headlights on and there was something I completely forgot about and thanks to @wrx usa for the pictures of his set up that clarified what my issue was. The JDM Headlights outer mounting tab fits to the JDM bumper unlike the USDM 05-07 headlights which mount all to the front frame. For a second I thought I had frame damage or that there as some defect in my car as I couldn't get it to mount correctly. Any of you doing the JDM facelift swap on your 05-07 please take note. INCORRECT INSTALL CORRECT INSTALL

JDM Power Folding Mirrors are installed and work perfectly! Adan Quezada is a certified Master Tech for Subaru Cars and he was able to wire these things up easily. Thank you AQ Motorsports - Torrance, CA Finally got the Tuned By STI Black A pillars and the rear gate trim in Black as well. 06-08 JDM BP5 Legacy Tuned By STI Black A,B,C,D Pillar Trim + Rear Trunk trim line Part Number A Pillars - 94010AG040JC, 94010AG050JC Part Number B Pillars - 94012AG140JC, 94012AG050JC Part Number B Pillar SRS cover - 94067AG110JC, 94067AG100JC Part Number C Pillars - 94013AG100JC, 94013AG110JC Part Number D Pillars - 94015AG000JC, 94015AG001JC Part Number Rear Gate Upper Trim - 94310AG000JC Part Number rear gate upper side trim RH.LH - 94330AG000JC, 94330AG010JC One of my favorite things. The Zerosports Carbon in cabin filter. Eliminates 99.9% of all carbon from the air coming in. Part Number - ZS-0411003

A few more days I'm told and then next stage - paint her SWP! Also sourced the JDM Power Foldering Mirrors off a REV D-F Legacy and got the folding function wired up!

Found some great condition 2008 JDM Legacy Multi-coated foglights! 06-08 JDM BP5 Legacy Multi-Coated Foglights Part Numbers - H4518AG101, H4518AG102 06-08 JDM Foglight Brackets Part Numbers - 57731SG140, 57731SG150 Of course the JDM HID headlights for the REV D-F set up. Leveling feature also got wired up! 06-08 JDM LEGACY HID Headlights Part Numbers - 84001AG361, 84001AG371 06-08 JDM LEGACY Headlight brackets Part Numbers - 57707AG040, 57707AG050

actually this is better to use. EDM LHD 3.0R SPEC B http://opposedforces.com/parts/legacy/en_b13/type_24/body_equipment_exterior/windshield_washer/illustration_4/

here is a diagram showing the parts needed. Looks like you just tap into the windshield washer tank with a separate pump and piping. http://opposedforces.com/parts/legacy/en_b13/type_24/body_equipment_exterior/head_lamp_washer/illustration_1/

The car is remaining LHD. AQ Motorsports was able to install the JDM Harness backward and extend certain wires and also repin a few to make everything work.

Some of the last parts to go in will be a JDM HKS TMIC kit that is designed for the EJ20Y. Also beatrush transmission carrier bushings. I have a Koyo Radiator + samco hoses installed as well. The car is about 90% complete now. AQ Motorsports told me that the car should be ready mid next week. Can't wait to see the STI Recaro seat install! Then the next step will be a tune and she's off to get her paint job.

Now I really wanted to use the Rear Fog Feature so I sourced the 07 JDM BP5 Rear gate garnish + rear fog and the EDM LHD turn signal stalk that has the rear fog switch and it just needs to be wired up. 06-08 JDM BP5 Legacy Rear Gate Garnish + Rear Foglight Part Number - 91710AG080 - will be repainted In order to use the rear fog you will need a EDM LHD turn signal stalk with the switch. I sourced it from Europe for myself and few other guys. 03-05 EDM LHD turn signal stalk + rear fog switch Part Number - 83114AG151 Painted REV D-F rear garnish!

Now using the JDM wiring was going to be a tough one as we had to remove the entire harness from the USDM car. But this will allow me to use the JDM Headlights plug and play and also the leveling feature plus the power folding mirrors! Hector at AQ Motorsports doing his magic. Final product. It's all wired up correctly. Here you can sort of see the Beatrush Laile Forged Aluminum Pitch Stop Rod. Part Number - S146010BC-AD And you can see the STI Mesh Clutch hose

Since I will be using the JDM rear bumper the options for the rear crash beam were as follows. 1. Cut up your USDM rear crash beam to fit on the JDM wagon bumper. 2. Possibly the USDM LGT Sedan rear crash beam fits like a glove on the JDM rear Wagon Bumper. (Not confirmed) 3. Purchase the EDM Legacy Wagon rear crash beam as it does use the JDM specification rear bumper and has a crash beam designed for it. 4. Use the Beatrush Laile rear end support arm bar. However the USDM Wagon mounting holes are too narrow and small so grinding cutting is required. I chose to go with option 3. I will update it when I get it installed.

Cusco front lower arm bar Part Number - 684 478 A Has been removed.

Also got the STI Pillowball rear lateral links on. Part Number - ST2029021000 A better picture of the rear cusco brace. Part Number - 684 492 R Also put in the Cusco lateral link support braces. Part Number - 684 478 A Difficult to see but installed Beatrush Laile Drive shaft collar bushings. Part Number - S76010PMB

This is the diagram for the GT foglight. If there isnt an number next to the part then it's not able to be sourced. http://opposedforces.com/parts/legacy/us_b13/type_36/electronic/lamp_fog/illustration_1/