Rutchard Posted April 5, 2013 Share Posted April 5, 2013 The issue if I understand correctly has to do with the rears... You have to either do brackets or redrilled rotors. I personally went with redrilled rotors but its up to you. Either way you have to go with redrilled rotors for the rear, but I think the brackets are only required if you get 04-07 STi rear brembos. Pretty sure the 08+ STi rears will bolt right on other than the rotors. Link to comment Share on other sites More sharing options...
okiflipks Posted April 7, 2013 Share Posted April 7, 2013 I wanna put WRX or STI rims on my '12 Legacy. Do-able or not? Im new to this, bolt pattern is 5x100 for the Legacy right? Link to comment Share on other sites More sharing options...
L3go Posted April 8, 2013 Share Posted April 8, 2013 Yes. 5x100. Any year WRX will work. Only '04 STI. Link to comment Share on other sites More sharing options...
DrD123 Posted April 8, 2013 Share Posted April 8, 2013 Yes. 5x100. Any year WRX will work. Only '04 STI.16" rims won't clear the calipers on the GT or 3.6R, so I guess that's 06+ WRX rims (assuming we are talking USDM cars) Link to comment Share on other sites More sharing options...
Ninja2k7 Posted April 20, 2013 Share Posted April 20, 2013 2.5 GT 2.5L 05-08 3" Dual Catback Exhaust System Systems + Y-Pipe<<<<do these fit '12 Legacy? Link to comment Share on other sites More sharing options...
minuccims Posted April 21, 2013 Share Posted April 21, 2013 2.5 GT 2.5L 05-08 3" Dual Catback Exhaust System Systems + Y-Pipe<<<<do these fit '12 Legacy? no Link to comment Share on other sites More sharing options...
EvilCamaroSS Posted April 23, 2013 Share Posted April 23, 2013 Really? I have a hell of a lot more posts than he does and I get pretty greasy.  http://i32.photobucket.com/albums/d50/Shockwave179/E86C648B-4869-4FAE-B827-1F2C35E06101-5535-0000075843FB0449.jpg Do I get extra points for knowing that is a LSx powered car? lol Link to comment Share on other sites More sharing options...
Blizzard Posted April 24, 2013 Share Posted April 24, 2013 Do I get extra points for knowing that is a LSx powered car? lol Sort of.  I'm going to laugh if you are in Rochester and have the same two cars as me. Link to comment Share on other sites More sharing options...
EvilCamaroSS Posted April 24, 2013 Share Posted April 24, 2013 Sort of.  I'm going to laugh if you are in Rochester and have the same two cars as me. I actually sold my 1998 Camaro SS to a Toyota technician in Binghamton a few years back, it was black with hugger orange stripes.  I miss it, one of the best cars I've ever owned. I never went as far as it looks you have by that picture, but I did put down 400+ RWHP. Link to comment Share on other sites More sharing options...
CloudyMG Posted April 25, 2013 Share Posted April 25, 2013 What aftermarket exhausts will fit 2010 2.5i? Link to comment Share on other sites More sharing options...
reeg420 Posted April 25, 2013 Share Posted April 25, 2013 What aftermarket exhausts will fit 2010 2.5i?  Axle back exhaust for an 08+ wrx sedan. I know off hand of perrin and megan that sell them. Ive heard on here that both sell just a single drivers side rather than two which is specifically for the wrx sedan. Axle back not cat back. Link to comment Share on other sites More sharing options...
Blizzard Posted April 27, 2013 Share Posted April 27, 2013 I actually sold my 1998 Camaro SS to a Toyota technician in Binghamton a few years back, it was black with hugger orange stripes.  I miss it, one of the best cars I've ever owned. I never went as far as it looks you have by that picture, but I did put down 400+ RWHP. Mine is a 98 Z28. Mod list is stupid long now.  Link to comment Share on other sites More sharing options...
s2baru Posted May 29, 2013 Share Posted May 29, 2013 sooo if brembos are bought from 05-07 sti, would goodridge ss lines be need or what else.... Link to comment Share on other sites More sharing options...
minuccims Posted May 29, 2013 Share Posted May 29, 2013 (edited) Rear adapted bracket 04 still rotors, or dual drilled Dual drilled rear rotors 5th gen SS lines Pads ATE or motul fluid Edited May 29, 2013 by minuccims Link to comment Share on other sites More sharing options...
Rutchard Posted May 29, 2013 Share Posted May 29, 2013 You don't need SS lines for the Brembos, but they couldn't hurt either. Link to comment Share on other sites More sharing options...
Blizzard Posted May 29, 2013 Share Posted May 29, 2013 If you are going to spend the coin on the Brembo setup it seems silly to use rubber lines. Stainless feel so much better. Link to comment Share on other sites More sharing options...
Rutchard Posted May 29, 2013 Share Posted May 29, 2013 Well Subaru didn't put stainless lines on the STi when they gave it Brembos... Link to comment Share on other sites More sharing options...
Blizzard Posted May 30, 2013 Share Posted May 30, 2013 (edited) Well Subaru didn't put stainless lines on the STi when they gave it Brembos... Â Yeah I know but I feel like it's a might as well get the most out of it type of situation. Edited May 30, 2013 by Blizzard Link to comment Share on other sites More sharing options...
s2baru Posted June 5, 2013 Share Posted June 5, 2013 Project MU SCR Rear Rotors 5x100/114.3* This is what I've found for rear dualdrilled rotors. Question is a I want BLACK rotors for the front but having a hell of a time finding them....the 07sti brembos would need to work with them Link to comment Share on other sites More sharing options...
Rutchard Posted June 5, 2013 Share Posted June 5, 2013 Project MU SCR Rear Rotors 5x100/114.3* This is what I've found for rear dualdrilled rotors. Question is a I want BLACK rotors for the front but having a hell of a time finding them....the 07sti brembos would need to work with them I don't like that they're slotted, but they are dual drilled http://www.rallysportdirect.com/DBA-42656S-10-GRP-4000-Series-T-Slot-Slotted-Rotors-Rear http://www.rallysportdirect.com/DBA-4654S-10-G-4000-Series-T-Slot-Slotted-Rotors-Front Link to comment Share on other sites More sharing options...
s2baru Posted June 5, 2013 Share Posted June 5, 2013 Those are what im wanting but, I was meaning more like this where they look black not the typical silver http://www.ftzoneracing.com/store/images/uploads/ProjectMuSCRMDiscRotors.JPG Link to comment Share on other sites More sharing options...
Rutchard Posted June 5, 2013 Share Posted June 5, 2013 I would think any plating on the surface of the rotor would eventually wear off. Good luck with the search. Link to comment Share on other sites More sharing options...
s2baru Posted June 5, 2013 Share Posted June 5, 2013 I'm gonna pm infamous and see what they say, I just dig the appearance of black Link to comment Share on other sites More sharing options...
GTEASER Posted June 5, 2013 Share Posted June 5, 2013 Short of getting custom made carbon fiber rotors, I'm not sure you're gonna get that look with anything steel. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
s2baru Posted June 5, 2013 Share Posted June 5, 2013 Gotcha. Worth a shot I guess. Visually I see the look I want in my head, just thinking the black would give some added POP to the orange wheels Link to comment Share on other sites More sharing options...
Recommended Posts