charlie_sheen Posted January 30, 2015 Share Posted January 30, 2015 It's pretty bad, even with the windows up. P.S. CNT catted DP is still available to anyone for $200 picked up OBO. you have this still for sale? Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted January 30, 2015 I Donated Share Posted January 30, 2015 you have this still for sale? Yep! Link to comment Share on other sites More sharing options...
charlie_sheen Posted January 30, 2015 Share Posted January 30, 2015 auto or MT? Link to comment Share on other sites More sharing options...
charlie_sheen Posted January 30, 2015 Share Posted January 30, 2015 and for the record, i smelled the catless smell for about a few weeks, after that, it disappeared to me. it doesnt even smell now Link to comment Share on other sites More sharing options...
BE-Fresh Posted February 5, 2015 Share Posted February 5, 2015 Anyone have/have any leads to a 5spd trans for sale? Buddy of mine had his go in his WRX. PM me with any info please and thank you! Link to comment Share on other sites More sharing options...
compsurge Posted February 5, 2015 Share Posted February 5, 2015 Are the LGT and WRX transmissions the same? I didn't think they were. They do have different part numbers. Link to comment Share on other sites More sharing options...
specd08 Posted February 5, 2015 Share Posted February 5, 2015 I dont no if it would fit. But look for a spec b trans. 6 speed. Stronger then sti trans. Link to comment Share on other sites More sharing options...
compsurge Posted February 5, 2015 Share Posted February 5, 2015 You'd likely need to swap the rear differential and axles too if the gear ratios are different. The 5MT in the Legacy is not a weak transmission. Link to comment Share on other sites More sharing options...
SBT Posted February 6, 2015 Share Posted February 6, 2015 Are the LGT and WRX transmissions the same? I didn't think they were. They do have different part numbers. Starting in 2006 the WRX also received the reinforced cases, similar to the 2005+ LGT, but the WRX transmission is a "pull-type" clutch and the ratios, transfer ratio and final drive were also different compared to the LGT transmissions which are all "push-type" clutch: 2006 WRX ID: TY754VZ6AA 1st / 2nd / 3rd / 4th / 5th / Rev / T.R./ F.D. / 3.45 / 1.95 / 1.370 / 0.970 / 0.743 / 3.333 / 1.1 / 3.9 / 2005 LGT ID: TY75VBAAB 1st / 2nd / 3rd / 4th / 5th / Rev / T.R./ F.D. / 3.17 / 1.88 / 1.3 / 0.970 / 0.743 / 3.331 / 1 /4.111/ - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
SBT Posted February 6, 2015 Share Posted February 6, 2015 I have a 2004 WRX trans with 172xxx on it with a full rebuild from Andrewtech 20,000 miles ago. I pulled it for a 6mt swap. Had an ACT clutch in it. Shifts perfectly. $900 in NOVA. Going rate I saw in Drivetrain is $800 for a used box. Please list that in the FS parts and link it back here. Rules for the FS threads are on the home page and at the top of each marketplace sub-forum. Thanks! - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
jyjellu Posted February 13, 2015 Share Posted February 13, 2015 WTB: fifth or sixth gen 3.6 exhaust mid section. Located MD Link to comment Share on other sites More sharing options...
SBT Posted February 16, 2015 Share Posted February 16, 2015 We have a WTB section for those requests. Feel free to link it back here. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
oncesir Posted February 19, 2015 Share Posted February 19, 2015 Interested in H&R Springs for a 4th Gen. Message me if you have some for sale. Link to comment Share on other sites More sharing options...
Billabong672 Posted February 19, 2015 Share Posted February 19, 2015 (edited) I've got a few items if anyone local(York, PA)is interested. Everything is for 2.5 Turbo OBXT, possibly turbo gt: -Valve cover gasket -Spark Plugs -Spark plug wires -Turbo coolant hose (I can get the part number if needed) Also I can get pictures of everything if anyone is interested. Take the whole lot, or let me know what you need. Shoot me a PM. Edited February 19, 2015 by Billabong672 Added location Link to comment Share on other sites More sharing options...
Gxl301 Posted February 19, 2015 Share Posted February 19, 2015 Interested in H&R Springs for a 4th Gen. Message me if you have some for sale. Pm'd Link to comment Share on other sites More sharing options...
Brett Posted February 24, 2015 Share Posted February 24, 2015 i got a set of TurboXs prototype mufflers for a 4th gen. they bolt right up to the stock y-pipe or to txs' production mid/y pipes. haven't had a legacy in over a year so i don't need these. any interest, pm me. Link to comment Share on other sites More sharing options...
98legwag Posted February 24, 2015 Share Posted February 24, 2015 i got a set of TurboXs prototype mufflers for a 4th gen. they bolt right up to the stock y-pipe or to txs' production mid/y pipes. haven't had a legacy in over a year so i don't need these. any interest, pm me. PMed you. Link to comment Share on other sites More sharing options...
hamburger1971 Posted March 1, 2015 Share Posted March 1, 2015 Well the time has come to part with my Spec B. Full classified ad is here: http://legacygt.com/forums/showthread.php/md-2006-lt-spec-b-8500-237886.html It's tastefully modded, has been taken care of, and needs a loving home. Please PM me or email at hamburger1971 at hotmail.com for more info! There are more pics on the posting above, and I'm happy to email some as well. Thanks, Jeff Link to comment Share on other sites More sharing options...
compsurge Posted March 1, 2015 Share Posted March 1, 2015 I wouldn't call front license plates a tasteful mod, but I don't like Maryland (former resident). Looks nice! GLWS. Link to comment Share on other sites More sharing options...
300zx2g35 Posted March 2, 2015 Share Posted March 2, 2015 Process West topmount and CNT catted downpipe for sale!! See my FS post: http://legacygt.com/forums/showthread.php/md-process-west-top-mount-and-cnt-catted-downpipe-237933.html?p=5080131#post5080131 Link to comment Share on other sites More sharing options...
scoobyjohn Posted March 7, 2015 Share Posted March 7, 2015 Front strut bar, cobb radiator shroud, cobb heat shield, ks tech 73mm intake with filter for sale. http://legacygt.com/forums/showthread.php/swpa-cobb-heat-shield-ks-tech-73mm-intake-cobb-rad-238125.html Link to comment Share on other sites More sharing options...
DONDOLO Posted March 18, 2015 Share Posted March 18, 2015 Any one in the area have rear toe arms for sale? Link to comment Share on other sites More sharing options...
discojon Posted March 18, 2015 Share Posted March 18, 2015 You mean the long one here right? I have one you can have for the price of shipping. http://tapatalk.imageshack.com/v2/15/03/18/4fef4f472be31c93c9a1e5e68a71a7c5.jpg Link to comment Share on other sites More sharing options...
DONDOLO Posted March 18, 2015 Share Posted March 18, 2015 I think those are what I need they are stock lower control arms? The previous owner had some Megan racing ones on now and on bent a little so I'm gonna go back to stock Link to comment Share on other sites More sharing options...
discojon Posted March 18, 2015 Share Posted March 18, 2015 Yeah rear lower arm. Also pictured are front control arms and rear top link. Pm me if you want the one rear lower. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now