Mines Posted July 24, 2008 Share Posted July 24, 2008 So basically when I first got my car (back in 04), one of the first items I got for my car was a Blitz SUS intake. At first I loved the whoosh sound of the turbo and the louder sound of the bpv. After a while, I started to get over the intake and really began to get annoyed of the whoosing and hissing noises. Whenever I was getting on an on-ramp, all I heard was the intake and it annoyed the f*** out of me (it felt like the car was struggling just to get on the freeway) After my experience with the blitz sus intake, I decided to never purchase an intake again and settled with just a blitz panel filter. The car was fun to drive again and I could actually hear my engine and exhaust instead of just the intake. Just recently I began to look for intakes again since I will be running a FMIC. I looked around for one that would offer the best performance and was quiet. My first choice would have been AEM but I heard too many issues with the filter getting wet and the maf being too small (I will be running a larger turbo). Then I came across the Harman Motive intake for 08 sti/wrxs. The unit looked very well made and included an AEM dryflow filter with an integrated velocity stack. I noticed that the 08 wrx/stis had awfully similar intake setups with the 05+ legacys. I compared pictures of stock airboxes and everything looked the same. I called up Harman Motive and spoke to Dan and he agreed and said that the intake should fit 05+ legacys. I took my car down to harman to get it checked out by dan and once he saw the stock legacy air box, he immediately said it would fit and said the only thing different was the Maf sensor. He made made me the intake with the legacy maf and I took it to Embee performance to get it powdercoated black. Review: First of all, I did not expect this intake to be this quiet. I was dreading that it would whoosh and hiss, but nothing much. Its basically as loud as my stock box with a blitz panel filter. And when you get into the higher rpms, it still doesn't make sucking noises, it just seems to make the engine louder (imagine an intake on a vtec, but not as loud). No cels, no issues with running rich, works with the stock intake snorkel, goes into the fender well but not too low that it gets wet, I love it. http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1816.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1817.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1818.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1814.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1819.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1820.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1821.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1827.jpg http://i105.photobucket.com/albums/m216/aznipiiimiip/IMG_1830.jpg heres the website for more info: http://www.harmanmotive.com/catalog/product_info.php?cPath=21_512_526_542&products_id=2510 you just have to order the intake with the legacy maf instead of the wrx/sti maf Link to comment Share on other sites More sharing options...
Mines Posted July 24, 2008 Author Share Posted July 24, 2008 oh yea, dan told me these intakes will support up to 350whp on a mustang dyno (about 400whp on other dynos) Link to comment Share on other sites More sharing options...
Infamous1 Posted July 24, 2008 Share Posted July 24, 2008 Do you know the approximate size of the MAF housing? Link to comment Share on other sites More sharing options...
SpawnGT Posted July 24, 2008 Share Posted July 24, 2008 whats the price of one of these units? and can you please make a video of it on ur car? my car right now is tuned for an AVO intake+FMIC, so im wondering what would occur if i through the HM intake on with the current tune. btw im hating on the AVO intake right now. Link to comment Share on other sites More sharing options...
edmundu Posted July 25, 2008 Share Posted July 25, 2008 ^^^ No way to know for sure, but you likely would need a re-tune. And if your fmic is an AVO, then this intake will not work. Exactly where the Harman Intake goes into the fenderwell, is where the fmic piping for the Avo, and many other fmic's comes out. Why are you hating the Avo? Just curious.... Link to comment Share on other sites More sharing options...
SpawnGT Posted July 25, 2008 Share Posted July 25, 2008 Intercooler is custom made by moi. i can take a picture to show you piping directions in that corner. on my stock turbo i seem to be getting occasional hesitation, as well as stuttering sounds when i accelerate in certain conditions. like in 3rd gear when im already going approxaimtly 50mph and give it gas, it seems to stutter up until the point where full boost is acheived where it makes a nice smooth sucking sound. Link to comment Share on other sites More sharing options...
Infamous1 Posted July 25, 2008 Share Posted July 25, 2008 Intercooler is custom made by moi. i can take a picture to show you piping directions in that corner. on my stock turbo i seem to be getting occasional hesitation, as well as stuttering sounds when i accelerate in certain conditions. like in 3rd gear when im already going approxaimtly 50mph and give it gas, it seems to stutter up until the point where full boost is acheived where it makes a nice smooth sucking sound. Doubt that is the intake, sounds more like the tune. Link to comment Share on other sites More sharing options...
SpawnGT Posted July 25, 2008 Share Posted July 25, 2008 tune has been perfect for approxamitly 8 months, and then all of a sudden it went to shit when the reall hot hot summer days came along. Link to comment Share on other sites More sharing options...
mjp0212 Posted July 25, 2008 Share Posted July 25, 2008 that might just be summer heat+turbo car. they dont work too well together i have the avo too, and it does get a little annoying w/ the noise, i just turn the music up though. stage 2 Link to comment Share on other sites More sharing options...
DiscoWagon Posted July 25, 2008 Share Posted July 25, 2008 No heatshield? Link to comment Share on other sites More sharing options...
SpawnGT Posted July 25, 2008 Share Posted July 25, 2008 AVO dont got one Link to comment Share on other sites More sharing options...
Mines Posted July 25, 2008 Author Share Posted July 25, 2008 sorry dont know the maf size its only $200 I will be using this on an AVO FMIC, so I really hope it fits one more thing, it wasn't as quiet as I originally thought (I actually took my car out on the freeway with the windows up this time), but its not that loud Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 27, 2008 Share Posted July 27, 2008 subscribe it's interesting how they claim there is no tuning necessary, a/f ratio's are fine, etc. And then offer a map for it for $150 more? Kinda contradicting, no? Link to comment Share on other sites More sharing options...
Infamous1 Posted July 27, 2008 Share Posted July 27, 2008 Haha, there is always tuning necessary. Even if the Maf is the same size the filter will change the way in which the air passes by the maf. Especially with the defusers in the housing being removed. Link to comment Share on other sites More sharing options...
Mines Posted July 27, 2008 Author Share Posted July 27, 2008 I think harman motive is saying its ok to run without tuning (i just reset my ecu) but its recommended to get tuning to optimize the intake. Link to comment Share on other sites More sharing options...
a.lim Posted December 8, 2008 Share Posted December 8, 2008 will this work with the perrin FMIC? Link to comment Share on other sites More sharing options...
Mines Posted December 8, 2008 Author Share Posted December 8, 2008 i dont know, but there are no more left as harman motive is closing shop and have sold out their inventory. Link to comment Share on other sites More sharing options...
a.lim Posted December 8, 2008 Share Posted December 8, 2008 why are they closing? Link to comment Share on other sites More sharing options...
Mines Posted December 8, 2008 Author Share Posted December 8, 2008 http://harmanmotive.com/blog/?p=179 Link to comment Share on other sites More sharing options...
NotMyGT Posted December 9, 2008 Share Posted December 9, 2008 I'm a retard that doesn't read, edit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.