neeksimons Posted March 13, 2022 Share Posted March 13, 2022 Does anyone know if this will fit our generation cars or know of one that's confirmed fitment for lhd cars? https://www.cj-motor.com/cusco-brake-master-cylinder-stopper-for-legacy-lib~258135 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Pleides Posted March 13, 2022 Share Posted March 13, 2022 Grimmspeed has a master cylinder brace for our fourth gens. https://www.grimmspeed.com/master-cylinder-brace-subaru-legacy-gt-05-mid-07-non-vdc/ Link to comment Share on other sites More sharing options...
neeksimons Posted March 13, 2022 Author Share Posted March 13, 2022 Grimmspeed has a master cylinder brace for our fourth gens. https://www.grimmspeed.com/master-cylinder-brace-subaru-legacy-gt-05-mid-07-non-vdc/ I know but I really like the blue on the Cusco haha Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Infosecdad Posted March 13, 2022 Share Posted March 13, 2022 Pretty sure that's setup for a master cylinder on the right side (our passenger/JDM driver) and doesn't flip to the other side for us. Need to find a USDM brace I think. Link to comment Share on other sites More sharing options...
SoobyDoobyDoo Posted March 14, 2022 Share Posted March 14, 2022 Does this do anything for an auto besides bling? Or does it just benefit 5/6mts? Link to comment Share on other sites More sharing options...
whitexc Posted March 14, 2022 Share Posted March 14, 2022 I have the GS piece on ny 5EAT car. It helps.....I think. Sent from my SM-G996U using Tapatalk Link to comment Share on other sites More sharing options...
Infosecdad Posted March 14, 2022 Share Posted March 14, 2022 Does this do anything for an auto besides bling? Or does it just benefit 5/6mts? It's for the brake master cylinder, should improve braking feel and performance by reduce the amount of movement the system can have under heavier braking. Link to comment Share on other sites More sharing options...
Rusty9 Posted March 14, 2022 Share Posted March 14, 2022 Does this do anything for an auto besides bling? Or does it just benefit 5/6mts? Depends on how often you smash the brakes as hard as you can. Everyday driving...not so much noticeable difference. Link to comment Share on other sites More sharing options...
boxkita Posted March 19, 2022 Share Posted March 19, 2022 a voice in the wilderness... I ran race tires on race track at race speeds. Stock brakes except for upgraded pads & centric cryo disks (cheapest discs I could find). Not having this brace had zero effect. I drove two wagons back to back, mine vs brembos & the mbcs. At anything close to sport driving speeds, it was un-noticeable. That said, it does reduce movement by 1/8-1/4" depending on slop in your system. Does it affect your braking? Only if you use the top 1/4" of travel. If you use the full travel of pedal, you'll never care. Should you get it. Yes. Its a common modification and is much cheaper than driving lessons. Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
SoobyDoobyDoo Posted March 20, 2022 Share Posted March 20, 2022 Haha…I’ll dare say there’s no replacement for good driving lessons, esp if you’re running on the track. That being said I may add it to the list for later. There’s still a decent amount to get done first. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now