Caffbat Posted November 16, 2014 Share Posted November 16, 2014 Had a run in with a pot hole in a parking lot, bent the front passenger control arm. Does Outback or WRX share the same components? Link to comment Share on other sites More sharing options...
Leviman Posted November 16, 2014 Share Posted November 16, 2014 Outback does. Not sure on the WRX, if it does, it'd probably be a 2008+ Link to comment Share on other sites More sharing options...
MrTris Posted November 16, 2014 Share Posted November 16, 2014 Outback does. Not sure on the WRX, if it does, it'd probably be a 2008+ That's my guess, too. Link to comment Share on other sites More sharing options...
Caffbat Posted November 17, 2014 Author Share Posted November 17, 2014 Thanks guys. I'm taking it to the shop tomorrow for them to check everything else out. What I know of is that I bent the control arm 2"-2.5" back and messed up the rim pretty bad. Depending on what he finds I'll order some parts and do it myself. Else I'll end up paying for labor Link to comment Share on other sites More sharing options...
fahr_side Posted November 17, 2014 Share Posted November 17, 2014 '08~'10 WRX uses the same arm, bushings etc. Obligatory '[URL="http://legacygt.com/forums/showthread.php/2008-gh8-238668.html?t=238668"]build thread[/URL]' Increased capacity to 2.7 liters, still turbo, but no longer need spark plugs. Link to comment Share on other sites More sharing options...
MrTris Posted November 17, 2014 Share Posted November 17, 2014 Save your receipts, some folks have had success in getting their city or county to chip in for repairs, if the damage occurred on their roads, was unavoidable, and due to neglect of road maintenance. Depends on who you talk to and how you go about it, though. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.