JDMBR9

are these aero parts sold in the usa? i can get the front corner bumper spoilers but they are mega expensive £350, so I though I would get them from japan yet postage and taxes are insane. I wonder if they where popular on usa cars, possible get them sent to me from usa? https://www.croooober.com/en/item/cparts/00000020/Body-Parts-Accessories/11162385/Wakeari-SUBARU-Genuine-Front-Aero-Splash https://www.croooober.com/en/item/cparts/00000131/Front-Body-Kits/10870727/Subaru-Genuine-OP-Front-Skirt-Left-And-Right-Split-BM-BR-Legacy-For-S-Package-Bumper-A-~-C-Type

I phoned Subaru uk dealer today the part is not used in a uk car. so I will probably just use an adapter. unless someone wants to send me one over

where would I find this union on a wrx? thanks

is there another oem union in the engine bay? getting a new sent over from usa is going to be expensive. if there is I could get one from a scraped legacy, or if the union is just a joiner I could use a brake line joiner. anyone know the thread size? thanks for all your help

your initial Camber at the front.is that with the stock camber adjusters set to the max? for better handling I found making the front -2 degrees both side

I think you can use kit kca335 tophats and use them

here are the pictures from my JDM BR9 RHD I was in a rush so there not the best.if needed I will take some more Tuesday.i have a push rod connected to the clutch pedal that goes through the firewall, Am I right in thinking that round thing is the clutch damper?should be easy to remove and use a brake line adapter

is it possible to use spc or whitline rear camber bolts on the oem rear setup?

is that steering wheel with the si controls standard? my 2010 br9 doesn't have those controls

Found it. Seems to be on the passenger side (rhd) in the gap between the intercooler and inlet manifold, needed an endoscope to see it all

I'm trying to register my br9 but I can't find the engine number on the engine. I've found a engine code on the vin plate inside the passenger side pillar, however I don't think that's the engine number. Please help. Thanks

does the br9 have a digital mph display? where can I get/buy a workshop manual? I think I need to replace the speedo dials from kph to mph is that easy to do? thanks

what oil brand is recommended for the ej255? I guess 10w40? thanks

its like a dong dong dong dong when in reverse.very annoying

now I have the car I have another question how can I turn off the reverse gear chime?

I wonder if it was because of lack of use.I drove it properly for the first time last night after a few miles the clutch stopped whining and the bite point has come up about 20mm.pedal is also heavier, so might be time for a new clutch soon. car drives and shifts properly. I will change the oil and look for a leak. thanks

ive just brought a 2010 jdm br9 with nearly 80k miles.the clutch bite point is nearly on the floor. how can I raise the bite point? would an oil change help? all gears seem to select properly and the clutch pedal isn't heavy. there is also a wine when the clutch pedal is down the car has been sat for about 4 months. please help.thanks

has anyone tried the Bilstein B12 or B14 kit on the gen 5?

what does burn up mean? how many miles is to long for an oil change? date is may 2010. milage is just under 80k miles,i don't know as yet how often its been changed.i will find out next week, when I collect it. what brand oil do you recommend?

hi is there any updates on which bolts with filters need replacing? im about to service my jdm br9 for the first time and replace all the banjo bolts I just don't know there location.thanks

I have the same noise on my bpe. only happens once every morning when I turn the steering wheel left.doesnt do it again until the next morning.The noise happened soon after I did a complete suspension over haul,all new parts bilstien shocks/oem springs whiteline kca409 top hats whilteline lca bushes including caster adjusters wheel alignment

hi ive been offered part number 98279AG020 its a oem airbag resistor .it was fitted to a 4th gen, I want to use it in my br9 when it arrives, do 4th/5th gens share the same yellow airbag connectors? thanks

are the br9 and 4th gen bp5/bpe exhaust centre and back boxes interchangeable

I see the usa got different springs after 2013 did they get changed in japan too? is the jdm br9 front sway bar easy to upgrade?

have you fitted front whiteline caster adjusters to get the caster back? is your legacy jdm?