neeksimons
Members-
Posts
55 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by neeksimons
-
Both headlights went out exact same time
neeksimons replied to neeksimons's topic in Fourth Generation Legacy (2005 - 2009)
Is the only way to check if the bulbs are bad is to buy new ones and swap them in? I remember replacing both maybe like 2 years ago because 1 side went out so that's why I don't think it's the bulbs. My DRL's still work but in the video I was talking about the guy said the DRL module went bad and that's what he replaced. My car is a 06 outback ll bean but same chassis as a legacy https://youtu.be/V_JRC4yCg60 -
Hi I recently took a trip to Zion last week and the morning we left I realized my headlights weren't working and they were working 1-2 days before. I find it highly unlikely both bulbs went out at the same time. So I checked both fuses inside the cabin one for the left and right headlamps and both are good not blown. My high beams and fogs still work, it's just my low beams. I came across a YouTube video with a guy with the same problem and he swapped the DRL module under the dash and it solved his issues. So I swapped mine from a junker at the junkyard and it didn't work either. Maybe I got a defective one as it was in AZ where the heat destroys electronics. What do you think it is? I REALLY don't wanna pay a shop to diagnose this and would like to solve it on my own. Any help is appreciated!!!
-
2005 LGT Full Part Out
neeksimons replied to Jeremie's topic in Member Classifieds :: Full Vehicle Part-Outs
I'm looking for the DRL module thats under the dash, if you have it I'd be willing to purchase! -
Looking for the jdm kit to install a new head unit if anyone has one for 05–09 Sent from my iPhone using Tapatalk
-
I finally got around to installing the oil temp and oil pressure gauge on my ez30r and was wondering what I should be keeping an eye out for on the gauges to make sure everything is in working order. The temp is in Celsius and the pressure is in kPa. Any help is appreciated! This is what I'm seeing currently warmed up at idle Sent from my iPhone using Tapatalk
-
I need this doesn't matter the color, the entire assembly with blank switches and all Sent from my iPhone using Tapatalk
-
fs - location: (MI) Misc. Left Over Parts
neeksimons replied to Shawn06SpecB's topic in Member Classifieds (2005 - 2009)
Do you have the little switch panel for the side mirrors that's above the interior fuse box? Like this Sent from my iPhone using Tapatalk -
Cusco brake master cylinder brace
neeksimons replied to neeksimons's topic in Fourth Generation Legacy (2005 - 2009)
I know but I really like the blue on the Cusco haha Sent from my iPhone using Tapatalk -
Update I got them working, I'm not sure if this was my problem all along but when I connected the red, orange, and black wiring to the fuse taps (red, orange) and black to the ground using the supplied connectors by defi the connector never actually pierced the jacket of the wire to make a connection. So I had to open up the connector and strip back the jacket on all the wires and it worked! I used the ground in the engine bay next to the fuse box and battery too. Since everything is wired right now but the sensors aren't hooked up yet. Is it normal for the gauges to move up and down a little bit since they're wired up but not connected in the engine bay yet and not actually reading anything yet? Sent from my iPhone using Tapatalk
-
Okay so I retested everything and im 99% sure the taps are correct. So it got me thinking about the ground. I went and tested the ohms resistance on the bolt where I grounded it and it read 16 ohms. Isn't it supposed be as close to zero as possible?? Could that be my problem? Sent from my iPhone using Tapatalk
-
Ez30 top radiator hose size?
neeksimons replied to neeksimons's topic in Fourth Generation Legacy (2005 - 2009)
I ordered a 38mm cause that's what I was reading on the forums for the turbo model but they are not the same Sent from my iPhone using Tapatalk