-
Posts
447 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by CT2015Legacy
-
Footwell illumination for under $10
CT2015Legacy replied to andrew_l_s's topic in Sixth Generation Legacy (2015 -2019 )
Subscribed! FANTASTIC write up. I like they more people are messing around with things and coming up with some DIY stuff. Sent from my iPhone using Tapatalk -
Yeah we ended up putting a locking washer on so I doubt it'll go anywhere. Only concern now is they I don't believe it is an SAE 8 bolt so my need to upgrade that to avoid any issue. Sent from my iPhone using Tapatalk
-
Yeah you and me both.... Now I wonder though after doing sin reading is just threading a bolt through the hole even though it wasn't fully threaded in and placing a nut on the other side then torquing down gonna be good enough or do I need to thread the hole again and weld on a back piece? Sent from my iPhone using Tapatalk
-
Well that bolt specifically my friend did. The ones I did went in find. I think the bolt was just in at an angle as the bolts were only hand tightened and torqued after that. As we started torquing it was below the posted 28 ft ibs so definitely wasn't over tightened when that happened. Sent from my iPhone using Tapatalk
-
End result; Frankenstein.... Not use to how it drives just yet; almost feels worse.http://images.tapatalk-cdn.com/15/07/20/a27ffc59f9232168d10e6aa0bc5c7c6f.jpg Sent from my iPhone using Tapatalk
-
Well had to cut the bolt off; wasn't coming off as it was just spinning in the socket. Completely stripped it. http://images.tapatalk-cdn.com/15/07/20/88efee460f644364f8cda3b49a3d37af.jpg Ended up using a thicker bold and threading a nut on the pack side to secure it torquing it down to 28 ft ibs. Sent from my iPhone using Tapatalk
-
Need urgent help; tried I install 20mm sway bar; went to go torque the bolts after hand tightening and right at 20ft ibs it just started going down. Bolt is stripped. Can't get it out. Any ideas? Sent from my iPhone using Tapatalk
-
Awesome!!! Thank you very much for that information.
-
Does anyone know what the torque specs for bushings and end links are? Looking to do this install soon. Sent from my iPad using Tapatalk
-
Well got some great news today followed by a nice surprise. Nameless performance will be shipping out my exhaust tomorrow or the day after and I should have it by this weekend! A nice surprise along with the exhaust arriving by the weekend is they they actually plan on developing a mid-pipe in the near future (date unknown).
-
Great info guys thank you! It is very much appreciated.
-
For those that are actually torquing the bolt down what is the spec for torque for what bolts...? I ordered the 20mm bar and will be installing shortly.
-
Update for everyone; Jason at Nameless Performance informed me that it'll be another 2-3 weeks until they get a car in for test fitting (as long as he is a valuable). According to him he informed me that a 3.0 Legacy with the axel back system and 4" mufflers sounded like a Porsche. Can't wait to hear what their exhaust actually sounds like on the 3.5. 2.5 guys should be able to purchase a single muffler/pipe from nameless that'll bolt right up. Follow me on Instagram @CT2015Legacy Sent from my iPhone using Tapatalk