CT2015Legacy

Awesome! Can't wait to hear what this sounds like on a 2.5... I have a buddy of mine at work that is looking into getting the muffler from NP as well that has a 2.5 so it would be great if once your done installing if you can post up a video clip.

Keep in mind that in Japan they have right hand drive not left so the mirrors are flipped. I'd love the power folding mirrors (should have taken apart the mirrors on my 15' before I traded it in to see if any extra wiring pins were on the harness) as if absolutely love to have power folding mirrors on my car. Sent from my iPhone using Tapatalk

Well that isn't an answer that they can really give you anyways. It's all personal preference; they don't know what you'd consider suitable. I have the 4" on my 3.6 and it is significantly louder than stock but I don't mind it. 5" is the quietest you could get and if your looking for an after market exhaust that would be most tolerable IMO. Sent from my iPhone using Tapatalk

I would say it is based on a different model Legacy possibly the previous gen. Not much if anything has changed with the 2.5 for some time exhaust else so I doubt a newer model would change the sound output. Sent from my iPhone using Tapatalk

I'll have my review for these up tomorrow. Sent from my iPhone using Tapatalk

UPDATED: 9/15/2015 Nameless Performance has finally added the 2.5 single axleback to their product listing for the 2015 Legacy. I had added that to the thread. Also added the Prova lowering springs found by Grnlantern. Front Struct Bar from SSD Performance. Badge Overlays.

I'd be very interested to see if they actually fit. A bunch of vendors I spoke to told me the emblems on the legacy were larger than the rest of the lineup. Please do report back once you install if you don't kind. Sent from my iPhone using Tapatalk

Yeah I guess that the tubes must be put in differently. Many I wonder what they look like. Might have to do some more research to make this happen then. Sent from my iPhone using Tapatalk

Ahh ok; well the car in that photo isn't US spec as it is a manual transmission which is not offered in the US only in Canada and other parts of the world. Anyone on here RHD or LED have the center mounter gear shifter that's is willing to take their center console apart and snap some photos? Sent from my iPhone using Tapatalk

No I'm saying the car in the photo has no rear vents so it has no tube interfering with the shifter as they do on the US spec. Wanna know how the rear AC vent tubing is ran in other models with the difference center console. Sent from my iPhone using Tapatalk

Where did you grab this photo from? I tore apart the console a few days ago and found that the rear AC vent tubing runs down along the right side of the center console making a center mount like shown in the photo impossible. I know they this car in particular doesn't has rear AC vents but I'd like to all least know what country the far is made to see what the CVT version looks like. Sent from my iPhone using Tapatalk

Having the below cup holder would be nice because you can have the part I've circled which will hold bottle in much better as they currently just flop all over the place. http://images.tapatalk-cdn.com/15/08/25/b5fa44ea8cc7bcf4fe676bf5cd8a8226.jpg Sent from my iPhone using Tapatalk

Looks more square though; would be interesting to see if the whole assembly could be swapped out somehow. Sent from my iPhone using Tapatalk

It will; can't wait to see the pictures. Sent from my iPhone using Tapatalk

UPDATED: Added Legacy Trunk Hook Accessory to "Interior" section. https://www.subarugenuineparts.com/product_info.php?products_id=2516

Unfortunately no; you can get the 3.6R mid pipe however all that's going to do for you is to allow to make it a dual exhaust however the 2.5 doesn't have the hangers welded on the passenger side to hold the muffler. Subaru did leave the areas where the hangers are suppose to be bare metal so you should be able to weld a pair of hangers on. It is going to be a custom job. Sent from my iPhone using Tapatalk

Twin pipe...? Do you mean for the exhaust system? Sent from my iPhone using Tapatalk

I am sure they it will be. When I take delivery I'll take a look and let you all know unless sometimes tried before I get the car and confirms. Sent from my iPhone using Tapatalk

You are correct that version will require a custom mounting solution. I have this kit on my car and the wiring harness plugs in now problem however mounting the lights takes some work and imagination. The 2016 Legacy now has the option for a Footwell Illumination Kit however I am unable to find a location to purchase just yet.

AFE Takeda Cold Air Intake added for the 2.5 owners. Note: Fitment has not been confirmed but as the 2014 version for the 3.6 Legacy fits I have no reason to believe the 2.5 version from the Legacy won't fit.

Thanks! I'll add tomorrow; already off the computer. Sent from my iPhone using Tapatalk

Nameless Performance Axelback Exhaust Now Avaliable (1st Official Systems For the 15+) *3.6R OWNERS ONLY; 2.5 OWNERS PLEASE EMAIL NAMELESS FOR AVAILABILITY. XenonDepot LED Lighting Upgrades. HID Upgrades added as well. AFE Takeda CAI added; fitment confirmed by two owners. *3.6R OWNERS ONLY

Alright guys now that I've had some time away I've realized that just because of one bad experience I shouldn't let it effect everyone else. THE STRIKE IS OVER!!! I will do my best to keep up with all the new products as they become known to me. I do work a full time job so this is a side thing that I do for fun and to help all you out. If you find something that isn't on the list that you believe should be on please send me a PM and I will my best to get it up ASAP. If their are to many posts in the thread I may miss your item so PMing is much easier. Thank you all!!

Nameless Performance Axelback Exhaust System NOW AVALIABLE for 3.6 Legacy CLICK HERE TO PURCHASE

Nice; I just called them today but haven't gotten a call back. I met with the guy who installed the intake today. No lights are coming on and everything is running smoothing. Perhaps a tune isn't needed. Sent from my iPhone using Tapatalk