Silinc3r

Well, I didn't have the stock Nav to hook up with, but I did install a camera with my new Kenwood. Wish I would have found this just a tad bit earlier or just not been a slacker. Thought taking off the rear piece would be a lot harder. It wasn't. Made one little unnecessary pilot drill hole but other than that all good. Thanks for this awesome right up. This also applies to non stock Nav people who want to add a camera for routing and removal process.

I guess I forget how old these things are sometimes. They hold remarkably well.

Sometimes it isn't the top but the weather stripping. It becomes less responsive and allows movement and lack of pressure on the window letting rain and water in.

Seat travel is good now with the extenders. Seat is all the way back and can be moved forward if needed.

You might be getting the two red cars confused. I didn't have to cut into the transmission tunnel to install my seat. Just drilled 2 holes on the rail and install.

It's on Corbeau rails stock mount location. It was a bit difficult since I had to find out for myself how to install it. I have a write up on it on miata.net.

Corbeau Evolution X seat, Nardi Deep corn 350mm, Bell works 75mm hub and had NRG quick release http://i733.photobucket.com/albums/ww331/TonyHamre/Miata%2090/IMAG1381_1.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/Miata%2090/IMAG1382.jpg

It's not Friday-- go!!

Got the header and downpipe wrapped. DEI titanium and the downpipe I thought was titanium but not sure, not the same as the DEI at least. http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1387.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1388.jpg

Didn't take pictures of the Killer B pickup and tray but we all know what it looks like. However, I do have pictures of it installed. Sealed with Fugibond red stuff http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1370.jpg Also, finally fixed the EGT sensor leak in the header. Upon removing the sensor half of the threaded part sheared and stayed in the header. Taped it and found a bolt, put some thread locker and safety wired that shit. Think I'm good now haha http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1360.jpg

DW65C installed, waskind of a pain compaired to the 91 Legacy Turbo instructions weren't the best for stating what o-rings to replace so hopefully I don't have an issue. http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1340.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1339.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1337.jpg Here is the write up from NASIOC DW65c install NASIOC

I love that movie and her. Remember the past, enjoy the future and long live the Legacy! -Me

Ben noice video, we just need to setup your audio and you'll be good to go.

how much does that cost? Taking videos?

So down pipe off, header off but not removed from the car, have to raise the engine a bit and hopefully it comes free. VF40 is out and in great shape, banjo filter removed though in great shape too.

oh JDM headlight garnish, JDM rear exhaust garnish, rear diffuser

VF52, DW300C fuel pump, Defi Din gauge pack, Perrin short ram, GS EBCS, JDM stereo surround and sure I am fogetting somethings

About to start ripping the car apart this weekend hopefully. New turbo and whole bunch of other shits going on.

If you don't like it, I maybe interested in swapping with you. I have always like the look of the Q300.

I have yet to install it. I can't find the one I bought, but these popped up when I typed it in google. They say different companies but they show the same photo haha. http://www.jskracing.com/Carbon-Fiber-Rear-Diffuser-SUBARU-A-STYLE-CARBON-FIBER-REAR-DIFFUSER-FOR-2007-2008-SUBARU-LEGACY-pid-5069.html http://jpcarbon.com/Carbon-Fiber-Rear-Diffuser-for-2003-2008-Subaru-Legacy-Liberty-P2084694.aspx

AND... here is the video I made from the local group I'm in when we went to the "Dragon" Emerald Coast Subaru Club

Tommy Kaira sun shade http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1312.jpg And all the other parts that will start to be installe dthis weekend hopefully http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1297.jpg

Zerosports Cool Action II Intercooler Splitter. This was very hard to find but found none the less. Part number ZS-0306014 http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/d9053636-9e09-4257-a0f4-4843fe15de3c.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1325.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1324.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1326.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1327.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1328.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1322.jpg http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1323.jpg Ebay carbonfiber rear diffuser http://i733.photobucket.com/albums/ww331/TonyHamre/05%20GT/IMAG1321.jpg

I have Brembos in the front and use Stoptech rotors with Stoptech pads. It's a great low cost solution. Rotors are rotors in my opinion.

Standby for influx of pics!