-
Posts
1,269 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by BigTDogg MA
-
Where to hook up recovery strap?
BigTDogg MA replied to Zac88's topic in Fourth Generation Legacy (2005 - 2009)
Wagon does have rear loop on the jack point. -
Hey gang, loooong time since I've been active here, but I know where to go when I do have a question I'm replacing my knock sensor soon, and I'm attempting to do it without removing my throttle body. I would like to replace hoses which are under the IC down in that area since I'm in there. Does anyone have a list of the hoses in there that I should replace? I'm thinking #29, maybe #21 and #22? Any other tips or tricks I should know about this job? I've got long needle nose pliers, bunch of extensions and wobbles, magnetic wands etc and I'm mechanically inclined with the vocabulary of a sailor.
-
KILLER deal on Lower control arms
BigTDogg MA replied to Harsho1's topic in Fourth Generation Legacy (2005 - 2009)
Are these the same size as OEM? I've noticed a lowspeed clicking when turning, and wonder if these are messing with my CV axles. Replaced both axles and the issue persists. -
Door Lock Actuator Problems
BigTDogg MA replied to chrisay's topic in Fourth Generation Legacy (2005 - 2009)
Just did this yesterday, followed the write up as guidance. USDM cars don't have a cable to the exterior handle, there's a solid rod. Easy enough to work around. Didn't have to remove the window, but it takes some patience maneuvering the unit around taking out and reinstalling. -
Door Lock Actuator Problems
BigTDogg MA replied to chrisay's topic in Fourth Generation Legacy (2005 - 2009)
Great write up sir, thank you! did you have to remove the window as per the FSM, or were you able to leave it in? -
Bolt up turbocharger upgrade - Vol-2
BigTDogg MA replied to SBT's topic in Turbo Powertrains (2.0GT, 2.5GT, 2.5XT)
Thanks but I already bought a new Blouch 16g from my installer. I'm so sick of this car, I just want it to be over. Get the turbo and injectors in and then tune and be done. I just want to drive it without being afraid it's going to blow up and leave me in financial ruins. /vent mode -
Bolt up turbocharger upgrade - Vol-2
BigTDogg MA replied to SBT's topic in Turbo Powertrains (2.0GT, 2.5GT, 2.5XT)
My power was 271, torque was 299. Mustang dynos read differently and everything so yeah, it was a ball park number. Stocks are 550cc/min -
Bolt up turbocharger upgrade - Vol-2
BigTDogg MA replied to SBT's topic in Turbo Powertrains (2.0GT, 2.5GT, 2.5XT)
So this is my current build: Apexi dry filter Grimmspeed TMIC VF52 DW65C pump OEM injectors on Agency Power fuel rails STI crank King bearings Manley 99.75 pistons Manley H-Tuff rods STI cams Brian Crower Intake valve set Brian Crower SS exhaust valve set ARP head studs Brian Crower valve springs and retainers Killer B Oil Baffle Killer B Oil Pickup Cometic Subaru EJ25 100mm Bore .030" Head Gasket STI 11mm Oil Pump Perrin Headers Grimmspeed UP Cobb catted DP Borla exhaust Want to swap out the turbo with something else. Another 52 or something better. Not going bigger on fuel. My previous dyno below: Only difference between this engine and the one dynoed there is that engine had OEM rods and Wiesco drop-ins, and OEM cams. I figure the BNR EVO3 16g is perfect, and may even fatten up my power and torque curves. -
Bolt up turbocharger upgrade - Vol-2
BigTDogg MA replied to SBT's topic in Turbo Powertrains (2.0GT, 2.5GT, 2.5XT)
I'm not gonna be pissed if I don't hit 300, I just want a good, safe tune. Last time around she it 271WHP with a VF52 and a less-than-ideal clutch. Tuner thought the setup was good for more, but the clutch hated me. -
Bolt up turbocharger upgrade - Vol-2
BigTDogg MA replied to SBT's topic in Turbo Powertrains (2.0GT, 2.5GT, 2.5XT)
So my VF52 is on it's way out. I need a turbo soon, as I'm tuning on 10/11. BNRs seem like a good option. I want to keep my UP and DP, I'm on a DW65c with stock injectors on parallel feed AP rails. Grimmspeed TMIC. Looking for around 300WHP/350WTQ, 93 octane fuel. I'm thinking a 16g should be plenty, or would I need to go to an 18g? Any other options available? -
JDM Rear Bumper for BP Wagon
BigTDogg MA replied to BigTDogg MA's topic in Fourth Generation Legacy (2005 - 2009)
Yep, the OB JDM rear bumper is definitely deeper than the JDM LGT wagon rear bumper. From Scooby2.5's classified ad -
JDM Rear Bumper for BP Wagon
BigTDogg MA replied to BigTDogg MA's topic in Fourth Generation Legacy (2005 - 2009)
Right, but the JDM Outback bumper sticks out as far as a sedan, IIRC, and the main difference is the rearward (not downturned) exhaust exit. Correct? I'll look at some shots of the guy who built that monster XT, I forget his SN. I tried a rough dry fit of the bumper on my wagon bar (identical to the sedan bar) with no foam and I can't see how it could fit. I think the AL bar will need to be trimmed somewhat. -
KILLER deal on Lower control arms
BigTDogg MA replied to Harsho1's topic in Fourth Generation Legacy (2005 - 2009)
How are the bushings on these? Stiff as STi stockers? -
JDM Rear Bumper for BP Wagon
BigTDogg MA replied to BigTDogg MA's topic in Fourth Generation Legacy (2005 - 2009)
I'll let you know what my shop does to save you some headache, hopefully -
JDM Rear Bumper for BP Wagon
BigTDogg MA replied to BigTDogg MA's topic in Fourth Generation Legacy (2005 - 2009)
Thanks, looks like they used the same beam, at least in the sketch. Did a google image search on 57712AG120 and it's identical to the the USDM beam. Def no foam there though. Thanks! That's what it looks like here, but the EDM wagon uses the same bumper. Do you think it'll fit with just the beam and no foam? I've directed the body shop to do what you suggest (cutting the bump-out) if need be, but I don't want to run with out a beam there. Thanks guys, was getting in panic mode now that the information I had previously didn't work out. Will be so happy just to have the car back! -
JDM Rear Bumper for BP Wagon
BigTDogg MA replied to BigTDogg MA's topic in Fourth Generation Legacy (2005 - 2009)
Hi all, I got a sedan beam, but it's identical to the wagon beam. The mounts etc are identical. The foam is different, is that the only difference? Can someone help here? Was there a change in 2008 for the sedan rear beam? Does anyone know the PN of the smaller rear beam? -
Official Atlantic Blue Thread Volume-2
BigTDogg MA replied to SBT's topic in Legacy Photos (2005-2009)
What's the deal on that scoop? Looks awesome. Pics of my reworked ABP coming soon. -
Need to see the hooked up wagons!!!!!!! Volume-2
BigTDogg MA replied to SBT's topic in Legacy Photos (2005-2009)
Anyone have pics of either of these configurations? - OEM rear bumper, area around exhaust blacked out. - JDM rear bumper - JDM rear bumper, area around exhaust blacked out. -
JDM Rear Bumper for BP Wagon
BigTDogg MA replied to BigTDogg MA's topic in Fourth Generation Legacy (2005 - 2009)
So I've got the bumper, need to know what else I need different than wagon config. The crash bar and foam from a sedan, what about side supports etc. Need to order the OEM parts soon to start repairs. -
Sup yall. On Monday, this happened: As the tow driver was taking my car off the flat bed, it rolled down a hill after the tow hook came out of the frame. Smashed into some small trees and timbers. I need a new rear bumper. I found a deal on a JDM wagon rear bumper. My question is: It includes only the bumper, what else do I need? Any brackets ETC different than USDM? If I use a sedan crash bar and foam, will it fit? I've tried searching and that's where I got the sedan CB idea from. But kinda need to know ASAP because the lead on the bumper is 10 days or so. Want to get my car fixed soon. Thanks in advance!
-
JDM Rear Bumper for BP Wagon
BigTDogg MA replied to BigTDogg MA's topic in Fourth Generation Legacy (2005 - 2009)
Sup yall. On Monday, this happened: As the tow driver was taking my car off the flat bed, it rolled down a hill after the tow hook came out of the frame. Smashed into some small trees and timbers. I need a new rear bumper. I found a deal on a JDM wagon rear bumper. My question is: It includes only the bumper, what else do I need? Any brackets ETC different than USDM? If I use a sedan crash bar and foam, will it fit? I've tried searching and that's where I got the sedan CB idea from. But kinda need to know ASAP because the lead on the bumper is 10 days or so. Want to get my car fixed soon. Thanks in advance!